20,000 Lb LOOPCO Uncoiler, 16" to 20" ID, 60" OD, 52" Width, Hyd Expansion
- Manufacturer
- LOOPCO
- Condition
- Used
Description
20,000 Lb LOOPCO Uncoiler, 16" to 20" ID, 60" OD, 52" Width, Hyd Expansion SPECIFICATIONS: Floor Mounted Single Mandrel Type Materials: CRS, HRS, Aluminum Coil Weight, Max.: 20,000 Lbs. Coil I.D.: 16" to 20" Coil O.D., Max.: 60" Coil Width: 52" (53" Face) Thickness, Approx.: .015" to .135" Passline, to Center of Mandrel: 41.5" Line Direction: Either EQUIPPED WITH: Hydraulic Expansion AC Feed-Up Drive Slide-Base Water Cooled Brake Water Cooler for Brake OVERALL DIMENSIONS: 145" x 58" 58" x 70" Baseplate CONDITION: No Hold-Down / Snubber Assembly No AC Starter Panel or Push Buttons No Hydraulic Unit
Specifications
| Baseplate Length (mm) | 1,473.2 |
|---|---|
| Baseplate Width (mm) | 1,778 |
| Brake Type | water_cooled |
| Coil Face Width (mm) | 1,346.2 |
| Coil Id Max (mm) | 508 |
| Coil Id Min (mm) | 406.4 |
| Coil Od Max (mm) | 1,524 |
| Coil Width (mm) | 1,320.8 |
| Drive Type | ac_feed_up |
| Expansion Type | hydraulic |
| Line Direction | either |
| Mandrel Type | single |
| Material Thickness Max (mm) | 3.429 |
| Material Thickness Min (mm) | 0.381 |
| Materials Compatible | CRS, HRS, Aluminum |
| Max Coil Weight (kg) | 9,071.847 |
| Mounting Type | floor_mounted |
| Overall Length (mm) | 3,683 |
| Overall Width (mm) | 1,473.2 |
| Passline Height (mm) | 1,054.1 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Coil Processing
4000 Lb. PA No. PR 4L,horizontal,42" table,6" STOCK WIDTH,36" STACKING HEIGHT
PR 4L
Spirit Machinery
75,000 Lb SESCO Twin Mandrel Uncoiler, 20" to 26" ID, 72" OD, 10" to 84" Width
SESCO · 55-547
Bass Machinery
20,000 Lb AMERICAN STEEL LINE Motorized Uncoiler, 17"-21" ID, 72" OD, 42" Width
American Steel Line · 1000 · 1981
Bass Machinery
30,000 Lb FORTE Motorized Uncoiler, 20" ID, 60" Width, Pneumatic Hold Down Arm
FORTE
Bass Machinery
10,000 Lb MICHIGAN ROLL FORM Double End Uncoiler, 16" to 20" ID, 72" OD, 24" W
Michigan Roll Form · DHCH-98B
Bass Machinery
5,000 Lb COOPER WEYMOUTH Double End Uncoiler, 18" to 22" ID, 48" OD, 18" Width
Cooper Weymouth · 5000 18DR
Bass Machinery
