Other

48" x 7.5" x 50,000 Lb TERMINAL EQUIPMENT Slitting Line, Right-to-Left

Sold by Bass Machinery·Available·Last verified 3h ago

Condition: Used

Description

48" x 7.5" x 50,000 Lb TERMINAL EQUIPMENT Slitting Line, Right-to-Left AGE: 1999/2000 SPECIFICATIONS: Coil Weight: 50,000 Lbs. Coil I.D.: 20" to 24" Entry, 20" (Pads for 24") Exit Direction: Right-to-Left CONSISTING OF: Entry Coil Car: 54" Wide Bed Self-Contained Hydraulics 8" Bore Hydraulic Lift Cylinder Hydraulic Lift Hydraulic Motor Travel Hand Pendant Control Cable Reel 14" From Floor to Bottom of "V" Cradle Overall Dimensions: 83" L x 54" W x 58" High Mandrel Uncoiler: 19" to 25" Hydraulic Expansion 24.5" to 30.5" (Bolt-On Pads) Expansion 52" Face Mandrel Slide Base Powered Overarm Holddown Roll AC Motor Threading Drive with Air Clutch Water Cooled Brake 52" Passline From Floor to Center of Mandrel Overall Dimensions: 144" L x 84" W x 99" High Peeler / Coil Breaker Unit: Peeler Table with 36" Wide Blade 3-Roll Coil Breaker: 7" Dia. x 58" Face Rolls, 1 Over 2 Top Roll Adjusted by Hydraulic Motor Driven Jackscrews Bottom Rolls Driven by Hydraulic Motor 59" Passline Height Overall Dimensions: 103" L x 102" W x 97" High Pinch Rolls / Crop Shear: 6" Dia x 55" Face Pinch Rolls: Non-Driven Hydraulic Cylinder Loaded 50" x 0.375" Roller Type Crop Shear: Hydraulic Cylinder Actuated Overall Dimensions: 160" L x 27" W x 81" High Removable Head Slitter, 2 Heads: Entry Threading Table 6" Dia. x 55.5" Face Entry Driven Pinch Rolls Entry Roller Side Guides with Hydraulic Motor Adjustment 7.5" Dia. x 52" Face Arbors Over the Arbor Design Outboard will Travel in to 38" for Heavier Gauges 30 HP, 1750 RPM, Foote Jones Helical Gearmotor, with 57.7:1 Ratio 30 HP, 1760 RPM, Pacemaker Motor, 230/460 Volt, Inline with Foot Jones Motor 50" Passline Height Overall Dimensions: 188" L x 84" W x 63" High 88" High with Head Recoiler: Rebuilt in 2000 Hydraulic Push-Off 20" Dia. x 54" Face Drum Bolt-On Pads for 24" Dia. Hydraulic Grip - Expand 2-Speed Reducer 125 HP DC Motor, 650 / 1950 RPM, 500 Volt, with Blower ABB DCS 800 Driver Overarm Separator 72" O.D. Capacity 54" Passline From Floor to Center of Drum Overall Dimensions: 178" L x 129" W x 94" High 2-Arm Turnstile: C-Hook Type Arms with 6" Wide x 8" High Slot 57" Approx. Useable Arm Length Powered Rotation Hydraulic Push-Off Overall Dimensions: 190" L x 97" W x 73" High (2) Scrap Winders: Dual Opposed Cones 36" W x 38" Dia. Ball Hydraulic Level Wind Hydraulic Motor Powered Overall Dimensions: 93" L x 54" W x 66" High