Forming·Panel Bender

PRIMA POWER BCE SMART 2220 PANEL BENDER MFG:2018

Sold by Jordan Craig Machinery·Available·Last verified 3h ago

Manufacturer: Prima Power
Model: BCE SMART 2220
Year: 2018
Condition: Used

Description

PRIMA POWER BCE SMART 2220 PANEL BENDER MFG:2018 Specifications Maximum Bending Length: 2250 mm Minimum Bending Length (with re-entering bends): 350 mm Minimum Bending Length (without re-entering bends): 215 mm Minimum Width between the Bends: 160 mm Sheet Length (minimum/maximum): 215 mm/2850 mm Sheet Width (minimum/maximum): 180 mm/1500 mm Maximum Panel Diagonal: 3000 mm Maximum Bending Height: 204 mm Vertical Distance between the Blades: 210 mm Maximum re-entering Bend: 55 mm Maximum Acceptable Planarity of the Blank: 10 mm Bending Force: 32Ton Sheet Clamping Force: 52 Ton Maximum Material Thickness Steel UTS 410 N/mm: 2.5 mm Max Length / 3.00 mm Max Stainless Steel UTS 680 N/mm: 1.8 mm Max Length / 2.00 mm Max Aluminum UTS 265 N/mm: 3.5 mm Max Length / 4.00 mm Max Minimum Information Minimum Thickness: 0.5 mm Minimum External Radius: 1.5 / 2 times the thickness of the sheet Minimum Height of the 1st Bend: 5 Times the thickness of the sheet Electrical Information Un: 3 x 400V In: 3 x 43A Frequency: 60 Hz Icu: 10 kA Full Load Current: 85 A Equipped With Prima Power Control

Specifications

Amperage (a)	43
Bending Force Ton	32
Frequency (Hz)	60
Full Load Current (a)	85
Maximum Acceptable Planarity (mm)	10
Maximum Bending Height (mm)	204
Maximum Bending Length (mm)	2,250
Maximum Material Thickness Aluminum Uts 265 (mm)	4
Maximum Material Thickness Stainless Steel Uts 680 (mm)	2
Maximum Material Thickness Steel Uts 410 (mm)	3
Maximum Panel Diagonal (mm)	3,000
Maximum Re Entering Bend (mm)	55
Minimum Bending Length With Re Entering Bends (mm)	350
Minimum Bending Length Without Re Entering Bends (mm)	215
Minimum External Radius Factor	1.5 to 2 times sheet thickness
Minimum Height First Bend Factor	5 times sheet thickness
Minimum Thickness (mm)	0.5
Minimum Width Between Bends (mm)	160
Phase	3
Sheet Clamping Force Ton	52
Sheet Length Maximum (mm)	2,850
Sheet Length Minimum (mm)	215
Sheet Width Maximum (mm)	1,500
Sheet Width Minimum (mm)	180
Short Circuit Current Ka	10
Vertical Distance Between Blades (mm)	210
Voltage (v)	400