Furnaces·Strip Annealing Furnace

8" W x 3" H x 108" L Strip Annealing Furnace, with Recoiler and Dissociator

Sold by Bass Machinery·Available·Last verified 4h ago

Condition: Used

Description

8" W x 3" H x 108" L Strip Annealing Furnace, with Recoiler and Dissociator SPECIFICATIONS: Electrically Heated, Continuous Strip-Annealing Unit with an Angular Hearth and Water Quench Tank, Includes a Recoiler and a Built-In Dissociator Heat Zone: 8" Wide x 3" High x 108" Long Coolant Quench Tank: 22" Wide x 20" High, 48" Long Combination Unit Width: 36" Length of Unit, Including Quench Tank, Approx.: 22' Height of Unit: 48" Single Muffle Design: 1/4" Thick Diamond Shape Muffle 9" Wide x 3" High Work Space at the Muffle Center Muffle is of all TIG Welded Deisgn and Extends Through the Furnace Entrance Sealed Atmosphere Box Extends Through the Furnace Exit and Enters the Water Quench Tank Kilowatt Rating of Furnace: 220/60/3, 80 Line Amps +/- 20% Furance Direction: Left to Right EQUIPPED WITH: Temeperature Control: There are two Watlow microprocessor-based auto-tuning controls for heating up to approximately 1500 degrees F. This divides the heat zone into two zones. Each zone is monitored for oven temperature by two Watlow over-temperature limit controls. All controls are calibrated for type (K) thermocouples. Cooling Quench Tank: Stainless steel material. There is a 4" diameter polymer drum for guiding the strip stock through the water tank. Panel Board Drive System: The drive system consists of a pair of rubber pinch rolls with soft rubber, geared for speeds up to 144 inches per minute. There is a "V" groove bearing assembly adjustable to 8" wide to guide strip into the pinch rolls Recoiler: 14" diamter x 9" wide collapsible drum

Specifications

Direction	left to right
Drive Type	rubber pinch rolls
Heat Zone Height (mm)	76.2
Heat Zone Length (mm)	2,743.2
Heat Zone Width (mm)	203.2
Heating Type	electric
Line Amperage (a)	80
Max Strip Speed Mm Per (min)	3,657.6
Max Temperature (f)	1,500
Muffle Design	single
Muffle Height (mm)	76.2
Muffle Material	TIG welded
Muffle Thickness (mm)	6.35
Muffle Width (mm)	228.6
Phase	3
Power (kW)	220
Quench Drum Diameter (mm)	101.6
Quench Tank Height (mm)	508
Quench Tank Length (mm)	1,219.2
Quench Tank Material	stainless steel
Quench Tank Width (mm)	558.8
Recoiler Drum Diameter (mm)	355.6
Recoiler Drum Width (mm)	228.6
Temperature Control Zones	2
Thermocouple Type	K
Unit Height (mm)	1,219.2
Unit Length (m)	6.706
Unit Width (mm)	914.4
Voltage (v)	60