3" x .134" TUREK & HELLER High Frequency Tube Mill Line, Right-to-Left
- Manufacturer
- Turek & Heller
- Model
- WU-25
- Year
- 2018
- Condition
- Used
Description
3" x .134" TUREK & HELLER High Frequency Tube Mill Line, Right-to-Left MODEL NUMBER: WU-25 SPECIFICATIONS: Line Direction: Right to Left Tube Diameter: 1" to 3" Wall Thickness: .034" to .134" Line Speed, Max. Gear In Speed, No Load: 300 FPM D/T Ratio: 10:1 to 60:1 Material Yield, Max.: 50,000 PSI Spindle Diameter: 2-1/2" Roll Space Forming: 12" Roll Space Fin and Sizing: 6-3/4" CONSISTING OF: Entry Equipment: 6,000 Lb. Jib Crane 10,000 Lb. KENT Model SKD Double Uncoiler KENT Model 10-135 Shear End Welder KENT Model R-227-RE Floop Forming Mill: Entry Guide Table, 4-Roll (4) Driven Breakdown Stands (6) Idle Side Rolls (3) Driven Fin Stands Welding Section: 250 kW ERW TECH Solid State High Frequency Welder: Age: 2018 Input: 480 Volts Amps: 500 Frequency: 60 Hz Phase: 3 Heat Exchanger: Powered XY Axis For Head Motorized Adjustments Seam Guide Unit 3-Roll Weld Pressure Unit Coolant Section, Flood Type, 15' Adjustment Sizing Mill: (3) Driven Sizing Stands (3) Idle Side Rolls Straightener, 4-Roll Turkshead Cut-Off: 3" UCG High-Speed Flying Cold Saw 20' Runout Table, Single Dump Mill Drive: (3) 75 HP DC Motors, 440/60/3 CONTROL TECHNIQUES Mill Controls Tooling: (8) Sets, Tooling Is Believed To Be Complete Sets, But Suggest Customer Inspection To Confirm Size Rounds: 50mm, 55mm, 60mm 1.500", 1.750", 2.000", 2.500", 3.000" OVERALL DIMENSIONS: 115' L x 15' to 20' W
Specifications
| Dc Motor Frequency (Hz) | 60 |
|---|---|
| Dc Motor Phase | 3 |
| Dc Motor Power (hp) | 75 |
| Dc Motor Quantity | 3 |
| Dc Motor Voltage (v) | 440 |
| Dt Ratio Max | 60 |
| Dt Ratio (min) | 10 |
| Entry Jib Crane Capacity (kg) | 2,721.55 |
| Erw Welder Amperage (a) | 500 |
| Erw Welder Frequency (Hz) | 60 |
| Erw Welder Input Voltage (v) | 480 |
| Erw Welder Phase | 3 |
| Erw Welder Power (kW) | 250 |
| Erw Welder Year | 2,018 |
| Line Direction | right_to_left |
| Line Speed Max Fpm | 300 |
| Line Speed Max Mpm | 91.44 |
| Material Yield Max (kPa) | 344,738 |
| Material Yield Max (psi) | 50,000 |
| Overall Length (ft) | 115 |
| Overall Width Max (ft) | 20 |
| Overall Width Min (ft) | 15 |
| Roll Space Fin Sizing (mm) | 171.45 |
| Roll Space Forming (mm) | 304.8 |
| Runout Table Length (ft) | 20 |
| Spindle Diameter (mm) | 63.5 |
| Tooling Sets Quantity | 8 |
| Tube Diameter Max (mm) | 76.2 |
| Tube Diameter Min (mm) | 25.4 |
| Uncoiler Capacity (kg) | 4,535.92 |
| Wall Thickness Max (mm) | 3.404 |
| Wall Thickness Min (mm) | 0.864 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Coil Processing
5-1/2" x .187" SFM High Frequency Tube Mill Line, Right-to-Left
SFM · 140
Bass Machinery
2" x .135" ADDISON Tube Mill Line, 150kW Elva Solid State Welder
Addison · AM-2250-U · 2001
Bass Machinery
3.5" x 6mm Rafted Oto Mills Tube Mill Line with Mair Packaging Line
Oto Mills · 2006
National Machinery Exchange
1 1/2" X .083" RAFTER LASER STAINLESS TUBE MILL LINE W/ IN-LINE BRIGHT ANNEALING
Rafter
National Machinery Exchange
4" x .250" Oto Mill Rafted Tube Mill Line with MAIR Packaging Line
Oto · 2022
National Machinery Exchange
20" x 0.500" API TUBE MILL LINE
2000API · 1977
National Machinery Exchange
