4" HAVEN KleenCut Supported Shear Recut, .320" or 8% of OD Wall, 20' Loader
- Manufacturer
- HAVEN
- Model
- 740 KLEEN CUT
- Year
- 2011
- Condition
- Used
Description
4" HAVEN KleenCut Supported Shear Recut, .320" or 8% of OD Wall, 20' Loader AGE: 2011 MODEL: 740 KLEEN CUT SPECIFICATIONS: Hand of Operation: Right to Left Max. Tube Diameter: 4" (101mm) Min. Tube Diameter: 1" (25.4mm) Max. Wall Thickness: .320" (8.12mm) or 8% of O.D. Cycle Speeds: Up to 5,000 Cycle/Hour Max. Cut Length: 24" EQUIPPED WITH: (1) 20' Bundle Loader Push Button Controls (1) Target Assembly (1) Central Grease NOTE: Near Burr Free Cut with NO Material Loss, Ideal for Short Lengths, Heavier Wall Thickness & a Wide Range of Materials. Condition: GOOD
Specifications
| Bundle Loader Length (ft) | 20 |
|---|---|
| Condition | good |
| Cycle Speed Cycles Per Hour | 5,000 |
| Hand Of Operation | right_to_left |
| Max Cut Length (mm) | 609.6 |
| Max Tube Diameter (mm) | 101 |
| Max Wall Thickness (mm) | 8.12 |
| Max Wall Thickness Percent Od | 8 |
| Min Tube Diameter (mm) | 25.4 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Coil Processing
SQUIRE-COGSWELL, No. 140BDLX,
Squire-Cogswell · 140BDLX
Standard Industrial Machinery
14 Ga. x 96" NATIONAL, No. N9614,
National · N9614
Standard Industrial Machinery
6000 Lb., DURANT, No. VSHD584M,
Durant · VSHD584M
Standard Industrial Machinery
4000 Lb. PA No. PR 4L,horizontal,42" table,6" STOCK WIDTH,36" STACKING HEIGHT
PR 4L
Spirit Machinery
14 STND SME,3.5"SHAFT DIA,KEYWAY IS .625"WIDE X .375"DEEP,100 FPM,40 HP
SME · 14 STND
Spirit Machinery
2000 Lb. LITTELL No. #20-12,15-20"INSIDE DIAM, 60"OUTSIDE DIAM,4 KEEPERS
Littell · #20-12 · 2000
Spirit Machinery
