20,000 Lb CMP Uncoiler, 13.5" to 16.5" ID, 50" OD, 29.5" Width
- Manufacturer
- CMP
- Condition
- Used
Description
20,000 Lb CMP Uncoiler, 13.5" to 16.5" ID, 50" OD, 29.5" Width SPECIFICATIONS: Capacity: 20,000 Lbs. Coil I.D.: 13.5" to 16.5" Coil O.D., Max.: 50" Face Segments: 29.5" Shaft Diameter At Forward Bearing: 8" Passline, Floor To Center Of Mandrel: 34.5" Line Direction: Right to Left EQUIPPED WITH: 4-Segment Mandrel Air Cylinder Powered Expansion Powered Holddown Roll, Dual Polyurethane Covered Rolls, AC Motor Thru Reducer Wichita Water Cooled Brake Attached Paper Winder, Air Motor Powered OVERALL DIMENSIONS: 103" L x 74" W x 84" High 120" Wide Including Paper Winder
Specifications
| Brake Manufacturer | Wichita |
|---|---|
| Brake Type | water_cooled |
| Capacity (kg) | 9,071.85 |
| Coil Id Max (mm) | 419.1 |
| Coil Id Min (mm) | 342.9 |
| Coil Od Max (mm) | 1,270 |
| Expansion Type | air_cylinder |
| Face Width (mm) | 749.3 |
| Holddown Drive | ac_motor_with_reducer |
| Holddown Roll Type | dual_polyurethane |
| Line Direction | right to left |
| Mandrel Segments | 4 |
| Overall Height (mm) | 2,133.6 |
| Overall Length (mm) | 2,615.6 |
| Overall Width (mm) | 1,879.6 |
| Overall Width With Winder (mm) | 3,048 |
| Paper Winder Drive | air_motor |
| Passline Height (mm) | 876.3 |
| Shaft Diameter (mm) | 203.2 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Coil Processing
4000 Lb. PA No. PR 4L,horizontal,42" table,6" STOCK WIDTH,36" STACKING HEIGHT
PR 4L
Spirit Machinery
75,000 Lb SESCO Twin Mandrel Uncoiler, 20" to 26" ID, 72" OD, 10" to 84" Width
SESCO · 55-547
Bass Machinery
20,000 Lb AMERICAN STEEL LINE Motorized Uncoiler, 17"-21" ID, 72" OD, 42" Width
American Steel Line · 1000 · 1981
Bass Machinery
30,000 Lb FORTE Motorized Uncoiler, 20" ID, 60" Width, Pneumatic Hold Down Arm
FORTE
Bass Machinery
10,000 Lb MICHIGAN ROLL FORM Double End Uncoiler, 16" to 20" ID, 72" OD, 24" W
Michigan Roll Form · DHCH-98B
Bass Machinery
5,000 Lb COOPER WEYMOUTH Double End Uncoiler, 18" to 22" ID, 48" OD, 18" Width
Cooper Weymouth · 5000 18DR
Bass Machinery
