Machine Tools·Automatic Lathe

WARNER & SWASEY #1SC12, N/C, 10" Dia 3-Jaw Chuck, 2-1/4" Dia Bar, 30/20/15 HP

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: Warner & Swasey
Model: 1SC12
Year: 1983
Condition: Used

Description

WARNER & SWASEY #1SC12, N/C, 10" Dia 3-Jaw Chuck, 2-1/4" Dia Bar, 30/20/15 HP AGE: 1983 SPECIFICATIONS: Chuck Diameter (3-Jaw Hydraulic): 10" Dia. No. of Turret Stations: 12 Bar Capacity: 2-1/4" Dia. Max. Swing Dia. (Over Turret Bar): 21-1/4" Max. Swing Dia. (Over Turret Face): 12-1/2" Longitudinal Work Area: 20-7/8" Longitudinal Stroke: 8-7/8" Cross Stroke: 6-1/4" Spindle Speeds (Even Range): 55 to 2558 RPM Spindle Speeds (Odd Range): 55 to 827 RPM Spindle Nose: 8" A-1 Thru Hole in Spindle: 2-13/16" EQUIPPED WITH: ALLEN BRADLEY 7360 NC Control Chip Conveyor Tool Holders on Turret Motor Data: 30/20/15 HP, 460/3/60 Volt 115 V Control Voltage Hydraulic Unit Coolant Pump & Motor Overall Dimensions (Doors Open): 200" x 104" x 76" High Condition: GOOD, Will Clean & Paint NOTE: Due to High RPM Range, 2500 RPM - a 10" Chuck must be used. Loaded on Truck..................Toledo, (Dorr St. Whse.) OH **PHOTO & CATALOGUE INFO AVAILABLE

Specifications

Bar Capacity (mm)	57.15
Chuck Diameter (mm)	254
Chuck Type	3-jaw_hydraulic
Condition	good
Control Type	N/C
Control Voltage (v)	115
Cross Stroke (mm)	158.75
Longitudinal Stroke (mm)	225.31
Longitudinal Work Area (mm)	529.72
Max Swing Diameter Over Turret Bar (mm)	539.75
Max Swing Diameter Over Turret Face (mm)	317.5
Motor Frequency (Hz)	60
Motor Phase	3
Motor Power (hp)	30
Motor Voltage (v)	460
Nc Control	Allen Bradley 7360
Overall Height (mm)	1,930.4
Overall Length (mm)	5,080
Overall Width (mm)	2,641.6
Spindle Nose	8_A-1
Spindle Speed Even Range Max (RPM)	2,558
Spindle Speed Even Range Min (RPM)	55
Spindle Speed Odd Range Max (RPM)	827
Spindle Speed Odd Range Min (RPM)	55
Thru Hole Spindle (mm)	71.44
Turret Stations	12