Coil Processing·Panel Line

14-Stand B & K AG Panel Line, 3-1/2" Spdl, 42" RS, 38" to 39" Finished Width

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: B & K AG
Model: 14-Stand Panel Line
Year: 1975
Condition: Used

Description

14-Stand B & K AG Panel Line, 3-1/2" Spdl, 42" RS, 38" to 39" Finished Width AGE: 1975 SPECIFICATIONS: Finished Width: 38" to 39" (Depending On Width Of Blank Used: 40.5" to 41.375") Total Coverage For Use Of Each Panel: 36" Runs: 80 to 95 FPM Electrics: 440/60/3 CONSISTING OF: =20,000 Lb. Model BKU-M1-01 Uncoiler: = =Age: 1975 = =Coil I.D.: 18-1/2" to 21-1/2" = =Width: 42" = =Hydraulic Expansion = =Hydraulic Sliding Base = =Air Brake = =Hydraulic Rotation = =Motor Data: 7.5 HP, 480 Volt 14-Stand B & K Model 2B-11 Roll Former: Note: This is a 16 Stand Base All Uppers are Idled (no gears or links) Spindle Diameter: 3-1/2" Roll Space: 42" Vertical: 4-1/2" to 9-1/2" Horizontal: 16" Center Bottom Shaft To Bed: 7 1/2" Width of Bed, Face of Gear Boxes to Outer Edge: 52" EQUIPPED WITH: Three Jog/Stop Electrical Boxes Along the Front of Base WER Industrial D.C. Variable Speed Drive Rotary Encoder for Measuring and Cutting to Length CONDITION: Good - All 14 gear box photos are Available Spindles Have no Tooling Impression Marks Motor Data: 30 HP, 230/480/60/3 O.A.D.: 102" x 291" x 58" high =60 Ton B & K Model 4P-16-01 Flying Cut-Off Press: AGE: 1975 = =4-Post Under Driven, SN 101 = =Capacity: 60 tons at 1/4" Off Bottom = =Stroke: 3" = =Shut Height: 11-1/2" to 14-1/2" = =Cuts Per Minute: 30 = =Between Posts: 18" x 52" = =33" Floor to Top of the Bed = =Air Clutch & Brake = =Induction Motor Data: 15 HP, 230/460/60/3, 1175 RPM EQUIPPED WITH: =Flying type Cut-Off Die =AC Vari-Speed Drive With DC Clutch =Control Panel & Batch Input =Simultaneous 4-post Shut Height Adjustment OVERALL DIMENSIONS: Uncoiler - 10' x 5' x 6'6" High Hydraulic Unit - 3' x 4' x 3' High Roll Mill - 24' x 8' x 5' High Cut-Off - 9' x 5' x 5'6" High Control Panel - 5' x 2' x 5' High 36' Long (Uncoiler to Shear Cut-Off Press) WEIGHT: Uncoiler - 9,000 Lbs. Hydraulic Unit - 2,000 Lbs. Roll Mill - 30,000 Lbs. Cut-Off - 8,000 Lbs. Control Panel - 1,500 Lbs. CONDITION: Good, As Removed Directly from Service

Specifications

Coil Id Max (mm)	546.1
Coil Id Min (mm)	469.9
Coil Width (mm)	1,066.8
Cutoff Press Between Posts Length (mm)	1,320.8
Cutoff Press Between Posts (mm)	457.2
Cutoff Press Capacity (tons)	60
Cutoff Press Cuts Per Minute	30
Cutoff Press Floor To Bed (mm)	838.2
Cutoff Press Motor (hp)	15
Cutoff Press Motor (RPM)	1,175
Cutoff Press Motor Voltage (v)	460
Cutoff Press Shut Height Max (mm)	368.3
Cutoff Press Shut Height Min (mm)	292.1
Cutoff Press Stroke (mm)	76.2
Cutoff Press Weight (kg)	3,628.74
Electrical Frequency (Hz)	60
Electrical Phase	3
Electrical Voltage (v)	440
Finished Width (mm)	990
Line Total Length (mm)	10,972.8
Line Total Weight (kg)	26,808.36
Roll Former Bed Width (mm)	1,320.8
Roll Former Horizontal Adjustment (mm)	406.4
Roll Former Motor (hp)	30
Roll Former Motor Voltage (v)	480
Roll Former Overall Height (mm)	1,524
Roll Former Overall Length (mm)	7,315.2
Roll Former Overall Width (mm)	2,438.4
Roll Former Vertical Adjustment (mm)	228.6
Roll Former Weight (kg)	13,607.77
Roll Space (mm)	1,066.8
Runs Fpm	95
Spindle Diameter (mm)	88.9
Uncoiler Capacity (kg)	9,071.85
Uncoiler Motor (hp)	7.5
Uncoiler Motor Voltage (v)	480