60" x .125" x 20,000 Lb EMAG / METFORM Cut-To-Length Line With Slitter
- Manufacturer
- EMAG / METFORM
- Condition
- Used
Description
60" x .125" x 20,000 Lb EMAG / METFORM Cut-To-Length Line With Slitter AGE: N/A SPECIFICATIONS: Capacity: 60" x .125" x 20,000 Lb. Coil Car: 64" Max. OD 20,000 Lb. Uncoiler w/Overarm, Motorized w/Brake Basic "Steelpro" Section Consisting of Slitter, Straightener - 0.25" - 1.25" Cap., & Flying Shear - 100 FPM Max., 2 Cuts @ .104", 4 Cuts @.075" (Steel), Blank Sizes - 4" - 60" Width, 6" Min. Length EMAG Hydraulic Scrap Rewinders AMS Controls MP350 Open Loop Controller Motor Data: 25 HP, 575/3/60 - Slitter/Straightener 10 HP - 575/3/60 - Hydraulics
Specifications
| Blank Length Min Inches | 6 |
|---|---|
| Blank Width Max Inches | 60 |
| Blank Width Min Inches | 4 |
| Coil Capacity (lb) | 20,000 |
| Coil Thickness Inches | 0.125 |
| Coil Width Inches | 60 |
| Controller Model | AMS Controls MP350 |
| Flying Shear Speed Fpm | 100 |
| Hydraulics Frequency (Hz) | 60 |
| Hydraulics Phase | 3 |
| Hydraulics Power (hp) | 10 |
| Hydraulics Voltage (v) | 575 |
| Max Coil Od Inches | 64 |
| Slitter Straightener Frequency (Hz) | 60 |
| Slitter Straightener Phase | 3 |
| Slitter Straightener Power (hp) | 25 |
| Slitter Straightener Voltage (v) | 575 |
| Straightener Capacity Inches | 1.25 |
| Uncoiler Capacity (lb) | 20,000 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Coil Processing
60" x .065" x 40,000 Lb ROWE Cut-To-Length Line, 12' Stacker, R-L Direction
ROWE · 2002
Bass Machinery
60" x .075" x 20,000 Lb IOWA PRECISION Cut-To-Length Line, .125" Aluminum
Iowa Precision · 6012
Bass Machinery
72" x .105" x 25,000 Lb ROWE Cut-to-Length Line
ROWE
Bass Machinery
72" x .25" x 40,000 Lb MCKAY Cut-to-Length Line, Left-to-Right
MCKAY
Bass Machinery
60" x .090" x 25,000 Lb MCKAY Cut-To-Length Line, 12' Stacker, L-R Direction
MCKAY
Bass Machinery
72" x .230" x 60,000 Lb HERR VOSS / PROECO Cut-to-Length Line, Left-to-Right
Herr Voss / Proeco · L-11-3-5-72-4HI
Bass Machinery
