24" W x 14" H JENFAB 4-Stage Parts Washer, Wash / Rinse / Ultrasonic Rinse / Dry
- Manufacturer
- JENFAB
- Model
- VCC200
- Year
- 2015
- Condition
- Used
Description
24" W x 14" H JENFAB 4-Stage Parts Washer, Wash / Rinse / Ultrasonic Rinse / Dry AGE: 2015 MODEL: VCC200 SPECIFICATIONS: Load/Unload Opening: 24" W x 14" High Programmable Cycle Time Max. Part Size: 20" LR x 10" FB x 8" High Number of Cross Rods: 96 to 108 if on 12" Centers NOTE: Parts can be Hung from Hook/Fixture or Placed into Baskets (Not Included) Cycle #1: Immersion Clean w/Submerged Turbulated Spray, 13 Station index Temperature: 160 Deg. F Max. Cycle #2: Spray Filtered Wash Solution Temperature: 160 Deg. F Max. Cycle #3: Drain Cycle #4: =Immersion Clean w/Ultrasonics, 13 Station Index =Temperature: 160 Deg. F Max. Cycle #5: =Drain Cycle #6 =Immersion Submerged Turbulated Spray Inhibiting Rinse, 10 = Station Index =Temperature: 140 Deg. F Max. Cycle #7: =Spray Filtered Inhibiting Rinse Solution =Temperature: 140 Deg. F Max. Cycle #8: Drain Cycle #9: Dry, Recirculating Blow Off Dryer Located Across the Top of Unit as Parts Return to the Load/Unload Position Originally Built As: Master Cycle Time: 15 Cans Every 15 Seconds 5 Sec. Index, 10 Sec, Dwell Min. Time in Wash Tank: 195 Seconds Approx. Min. Time in Ultrasonic Wash Tank: 195 Seconds Approx. Min. Time in Rinse Tank: 195 Seconds Approx. Min. Time in Dryer: 240 Seconds Approx. Number of Hanging Positions: 75 Cross Rod Spacing: 14" (Each Position) Electrical: 460/3/60, FLA TBD; 24 VDC Control 2" Process Water Connection, Stainless Steel Piping & Solenoid Valves 2" Waste Water Connection 1" Compressed Air Connection Wash Tank: 150 GPM, 5 HP Gusher SS Pump #11019-AH-B-SS-SE Through Bag/Magnetic Filter with Pressure Switch to Turbulation Station Electric Heat to 160 Deg. F. 63 KW, (2) Protech #9HS31.5434-P2- X72 Automatic Water Make-Up Feed from Filtered Ultrasonic Wash Solution; Sloped Bottom, Access Panels Through Chain Frame on Both Sides of Machine 45 Gal. Oil Separator with (1) One 2 HP Pump Ultrasonic Wash Tank: 40 GPM, 3 HP Gusher SS Pump #11019-CIH-B Through Multi-Cartridge Filter with Pressure Switch Electric Heat to 160 Deg. F. 63 KW, (2) Protech #9HS31.5434-P2- X72, 4000 Watts/25KHZ Ultrasonic; Automatic Water Make-Up Feed From Filtered Rinse Solution; Sloped Bottom, Access Panels Through Chain Frame on Both Sides of Machine Rinse Tank: 100 GPM 3 HP Gusher SS Pump #11019-CIH-B Through Multi-Cartridge Filter with Pressure Switch Electric Heat to 160 Deg. F. 63KW, (2) Protech #9HS31.5434-P2-X72 Automatic Water Make-Up from Water Header, Sloped Bottom Access Panels Through Chain Frame on Both Sides of Machine Recirculating Dryer: 8000 CFM, 10 HP, New York Blower Size 20 60 KW Electric Heat to 180 Deg. F High Temperature Cut Off Switch & Pressure Monitoring of Air Flow for Heater Protection Chain Conveyor: 1.5 HP, 460/3/60; Variable Frequency Drive Donaldson Torit Mist Collector; WSO-15, 850 CFM, 1.5 HP Donaldson Torit Mist Collector; WSO-15, 850 CFM, 1.5 HP
Specifications
| Chain Conveyor Power (hp) | 1.5 |
|---|---|
| Compressed Air Connection Inch | 1 |
| Control Voltage Vdc | 24 |
| Cross Rod Spacing (mm) | 355.6 |
| Cycle Time Seconds | 15 |
| Dryer Cfm | 8,000 |
| Dryer Heater Power (kW) | 60 |
| Dryer Max Temperature (f) | 180 |
| Dryer Power (hp) | 10 |
| Dwell Time Seconds | 10 |
| Electrical Frequency (Hz) | 60 |
| Electrical Phase | 3 |
| Electrical Voltage (v) | 460 |
| Index Time Seconds | 5 |
| Load Unload Opening Height (mm) | 355.6 |
| Load Unload Opening Width (mm) | 609.6 |
| Max Part Size Depth (mm) | 254 |
| Max Part Size Height (mm) | 203.2 |
| Max Part Size Length (mm) | 508 |
| Min Time In Dryer Seconds | 240 |
| Min Time In Rinse Tank Seconds | 195 |
| Min Time In Ultrasonic Wash Tank Seconds | 195 |
| Min Time In Wash Tank Seconds | 195 |
| Mist Collector Cfm | 850 |
| Mist Collector Model | WSO-15 |
| Mist Collector Power (hp) | 1.5 |
| Number Of Cross Rods | 108 |
| Number Of Hanging Positions | 75 |
| Number Of Mist Collectors | 2 |
| Oil Separator Capacity (gal) | 45 |
| Oil Separator Pump Power (hp) | 2 |
| Process Water Connection Inch | 2 |
| Rinse Tank Flow Rate Gpm | 100 |
| Rinse Tank Heater Power (kW) | 63 |
| Rinse Tank Max Temperature (f) | 160 |
| Rinse Tank Pump Power (hp) | 3 |
| Ultrasonic Frequency Khz | 25 |
| Ultrasonic Power Watts | 4,000 |
| Ultrasonic Wash Tank Flow Rate Gpm | 40 |
| Ultrasonic Wash Tank Heater Power (kW) | 63 |
| Ultrasonic Wash Tank Max Temperature (f) | 160 |
| Ultrasonic Wash Tank Pump Power (hp) | 3 |
| Wash Tank Flow Rate Gpm | 150 |
| Wash Tank Heater Power (kW) | 63 |
| Wash Tank Max Temperature (f) | 160 |
| Wash Tank Pump Power (hp) | 5 |
| Waste Water Connection Inch | 2 |
Request a quote from Bass Machinery
Tell Bass Machinery what you need. They'll reply directly to you.
More in Process Plant
18" W x 4" H MIDBROOK Parts Washer, Heated Wash/Heated Rinse/Heated Dry
Midbrook · 5012 W/R/80 · 1995
Bass Machinery
30" Dia DUNNAGE WASH SYSTEMS Drum Style Parts Washer, 2000, (2) Available
Dunnage Wash Systems · FL3032-ED · 2000
Bass Machinery
48" Dia x 60" H CUDA Parts Washer, 5,000 Lb Cap, 18 kW Heater, 7-1/2 HP
CUDA · H20-4860 · 2017
Bass Machinery
130" L x 90" W x 79" H BvL Parts Washer, All Stainless Steel, 13,000 Lb Load
BvL · 999079 · 2011
Bass Machinery
13" W x 10" H GERREF 2 Stage Parts Washer, Electric Heat, Exhaust/Mist Hood
GERREF
Bass Machinery
50" Dia x 60" H BETTER ENGINEERING Rotary Table Parts Washer, 2,500 Lbs, 10 HP
Better Engineering · F5000-LXP · 1996
Bass Machinery