Material Handling·Steel Belt Conveyor

6" W x 21'2"L NEW LONDON Steel Belt Conveyor, 2-1/2" Pitch Hinged, 1/2 HP, 2015

Sold by Bass Machinery·Available·Last verified 3h ago

Manufacturer: NEW LONDON
Year: 2015
Condition: Used

Description

6" W x 21'2"L NEW LONDON Steel Belt Conveyor, 2-1/2" Pitch Hinged, 1/2 HP, 2015 AGE: 2015 SPECIFICATIONS: 6" Wide, Type 3 - 21'2" Infeed / 7' Intermediate - 60" UC - 3'6" Drive Tangent 60 Deg. Incline 1/2 HP, 230/460/3/60 Drive Unit w/Torque Limiter for a Constant Belt Speed of 20 FPM (2) 5" PD Drive Sprockets (2) 5" PD Tail Sprockets with Internal Bearings Hinged Steel Belt: 2.5" Pitch, 10 Ga x 1.5" Side Wings 1.5" Dia. Rollers x 6" W 12 Ga Perforated Apron Plates, 1-3/8" Tall Cleats on 12-1/2" Centers Formed 12 Ga x 8.5" Deep x 10.25" Wide with 3-1/2" Side Rails on Each Side Full Length of Conveyor Supports - (1) Pair on Discharge for 52" High - In-Feed in 35" Deep Pit Knee Braces - (2) Pairs for #3 Braces NEW COST PER MANUFACTURER WAS $11,990 CONDITION: Very Good, Low Hours, Can Be Inspected Under Power. Purchased for Boring Mill that Broke and was Scrapped Shortly after this Conveyor was Installed.

Specifications

Belt Speed Fpm	20
Belt Speed Mpm	6.096
Belt Type	hinged_steel
Cleat Height (mm)	34.925
Cleat Spacing (mm)	317.5
Condition	very_good
Discharge Support Height (mm)	1,321.2
Drive Sprocket Pd (mm)	127
Frequency (Hz)	60
Incline Degrees	60
Infeed Length (m)	6.462
Infeed Pit Depth (mm)	889
Intermediate Length (m)	2.134
Length (m)	6.462
Phase	3
Pitch (mm)	63.5
Power (hp)	0.5
Power (kW)	0.373
Roller Diameter (mm)	38.1
Roller Width (mm)	152.4
Side Wing Height (mm)	38.1
Tail Sprocket Pd (mm)	127
Voltage (v)	230/460
Width (mm)	152.4