Machine Tools·Tube Piercing System

Tube Piercing System, 1-1/2" Dia CRITERION, 72" Max Over Mandrel, Hyd, Semi-Auto

Sold by Bass Machinery·Available·Last verified 4h ago

Manufacturer: CRITERION
Model: AUTO-PIERCE
Year: 1990
Condition: Used

Description

Tube Piercing System, 1-1/2" Dia CRITERION, 72" Max Over Mandrel, Hyd, Semi-Auto AGE: 1990'S MODEL: AUTO-PIERCE SPECIFICATIONS: Capabilities: High Speed Semi-Automatic Piercing Over Mandrel, Using Gang Type Punches in Die Set to Produce Dimple Free Holes. (2) Tubes at a Time, with Manual Load Station Equipped with Light Curtain Safety System. Max. Tube Length Over Mandrel: 72" Current Die Set Specifications: Tube Diameter: 3/4" to 1-1/2" Min. Distance on One Tube End without Holes: 1-7/8" Wall Thickness: .030" - .120" Punch Configuration: (2) Dies with (4) Punches Inline Cycle Time per Pierce Unit Activation & 1 Index: 1.1 Sec. (Per Factory) EQUIPPED WITH: Servo Electric Tube Locating & Indexing System for Accurate & Consistent Hole Spacing - Y- Axis Linear, B-Axis Rotational ID Type Hydraulically Actuated Collet PC Based Operator Controls for Programming Both Axially & Radially Stand Alone Hydraulic Power Unit Motor Data: 230/460/3/60

Specifications

Actuation Type	hydraulic
B Axis	rotational
Collet Type	ID type hydraulically actuated
Control System	PC based
Cycle Time Per Pierce Unit Activation Sec	1.1
Locating System	servo_electric
Max Tube Length Over Mandrel Inches	72
Max Tube Length Over Mandrel (m)	1.829
Min Distance One Tube End Without Holes Inches	1.875
Min Distance One Tube End Without Holes (mm)	47.625
Motor Frequency (Hz)	60
Motor Phase	3
Motor Voltage (v)	230/460
Operation Mode	semi_automatic
Punch Configuration	2 dies with 4 punches inline
Safety System	light curtain
Tube Diameter Max Inches	1.5
Tube Diameter Max (mm)	38.1
Tube Diameter Min Inches	0.75
Tube Diameter Min (mm)	19.05
Tubes Per Cycle	2
Wall Thickness Max Inches	0.12
Wall Thickness Max (mm)	3.048
Wall Thickness Min Inches	0.03
Wall Thickness Min (mm)	0.762
Y Axis	linear