Coil Processing·Skin Pass Mill

25" WATERBURY-FARREL, 2-HI SKIN PASS MILL

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: Waterbury-Farrel
Condition: Used

Description

25" WATERBURY-FARREL, 2-HI SKIN PASS MILL SPECIFICATIONS MILL SECTION: 2 HI MILL TYPE: NON REVERSING MATERIAL: STAINLESS STEEL, CARBON STEEL STRIP WIDTH DATA MAXIMUM: 25.000IN/635.001MM MINIMUM: IN/0.000MM ENTRY GAUGE MAXIMUM: 0.030IN/0.762MM EXIT GAUGE MINIMUM: 0.003IN/0.076MM MAXIMUM COIL SIZE (WINDER) O.D.: 44.000IN/1117.602MM COIL SIZE (WINDER) I.D.: 16.000IN/406.401MM MAXIMUM COIL WEIGHT: 0.000 ABSOLUTE COIL WEIGHT: 9,375 LBS/ 4,252 KG MILL DATA/ MILL SPEED (MAX): 500FPM/152MPM MILL SPEED (MIN): 250FPM/76MPM MILL POWER, MAIN MOTOR: 150HP/112KW 1800 RPM, WATER COOLED, EDDY CURRENT CLUTCH 44O VOLT, 3PH, 60 CYC PINION STAND RATIO34.62 & 17.39 2 SPEED MILL ROLLS WORK ROLL NOMINAL DIAMETER: 20.000IN/508.001MM BACK UP ROLL DIAMETER30.000IN/762.002MM MILL BEARINGS , ROLLER TYPE/ WINDERS WINDER POWER: 300HP/224KW WATER COOLED, EDDY CURRENT CLUTCH 440 VOLT, 3 PH, 60 CYC WINDER MANDREL: DIAMETER: 16.000IN/406.401MM FACE: 28.000IN/711.201MM MANDREL TYPE: EXPANDABLE, 15.646" CLOSED WINDER TENSION: MAXIMUM: 7,200 LBS/ 3,266 KG INTERMEDIATE TO 650 FPM: LBS/ - KG MINIMUM: LBS/ - KG GEAR REDUCER RATIO13.8 : 1 PAYOFF POWER: HP, AC/0KW TENSION: 4000LBS/ 1,814 KG SPEED: MANDREL DIAMETER: 14.5 TO 17.5IN/MM NOMINAL: 16.000IN/406.401MM (WITH FILLERS): IN/0.000MM WATER COOLED BRAKE, MANUAL EDGE CONTROL COOLANT -FILTER SYSTEM: MILL DIRECTION: RIGHT TO LEFT LINE CONFIGURATION COIL CAR: FIXED PAYOFF REEL: DEFLECTOR ROLL: MAIN MILL FRAME: (2) 15" HYDRAULIC CYLINDER LOAD/ADJUSTMENT ROLL POLISHING TOP AND BOTTOM DEFLECTOR ROLLPIVOTING FOR LOAD CELL WINDER (LEFT): "L" SHAPED COIL CAR MOTOR DRIVE CONTROLS: OPERATOR CONTROL CONSOLE OVERALL FLOOR DIMENSIONS, (L-R / F-B): 20'-6" X 17'-3"

Specifications

Absolute Coil Weight (kg)	4,252
Backup Roll Diameter (mm)	762.002
Coil Car Type	fixed
Coil Id (mm)	406.401
Entry Gauge Maximum (mm)	0.762
Exit Gauge Minimum (mm)	0.076
Hydraulic Cylinder Size (in)	15
Main Mill Frame Hydraulic Cylinders	2
Main Motor Clutch	eddy_current
Main Motor Cooling	water_cooled
Main Motor Frequency (Hz)	60
Main Motor Phase	3ph
Main Motor Power (kW)	112
Main Motor (RPM)	1,800
Main Motor Voltage (v)	440
Material Processed	stainless_steel, carbon_steel
Maximum Coil Od (mm)	1,117.602
Maximum Strip Width (mm)	635.001
Mill Direction	right_to_left
Mill Section	2_hi
Mill Speed Max Mpm	152
Mill Speed Min Mpm	76
Mill Type	non_reversing
Overall Length (m)	6.248
Overall Width (m)	5.258
Payoff Brake Type	manual
Payoff Cooling	water_cooled
Payoff Mandrel Diameter Max (mm)	444.5
Payoff Mandrel Diameter Min (mm)	368.3
Payoff Mandrel Nominal Diameter (mm)	406.401
Payoff Tension (kg)	1,814
Pinion Stand Ratio	34.62 & 17.39
Winder Clutch	eddy_current
Winder Cooling	water_cooled
Winder Frequency (Hz)	60
Winder Gear Reducer Ratio	13.8:1
Winder Mandrel Closed (mm)	15.646
Winder Mandrel Diameter (mm)	406.401
Winder Mandrel Face (mm)	711.201
Winder Mandrel Type	expandable
Winder Maximum Tension (kg)	3,266
Winder Phase	3ph
Winder Power (kW)	224
Winder Voltage (v)	440
Work Roll Diameter (mm)	508.001