Coil Processing·Leveler

72" X .250" BRADBURY E-DRIVE LEVELER

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: Bradbury
Year: 2011
Condition: Used

Description

72" X .250" BRADBURY E-DRIVE LEVELER 72" X .250" BRADBURY E-DRIVE LEVELER MANUFACTURER BRADBURY YEAR 2011 SPECIFICATIONS MATERIAL TYPE: HOT ROLLED STEEL-BLACK AND P&O ASTM A36, A572, A871, A1011 CAPACITIES (MAXIMUM): 0.250" X 72" @65,000 PSI-GRADE 50 0.205" X 72" @ 80,000 PSI-GRADE 65 CAPACITIES (MINIMUM): 0.100 X 36"@ 80,000 PSI-GRADE 65 0.075" X 36" @ 70,000 PSI 0.060" X 36" @ 55,000 PSI WORK ROLL NUMBER: 11: 5 UP, 6 DOWN WORK ROLL SIZE: 3.50" DIAMETER X 86" FACE BACK UP FLIGHTS: 7 TOP AND 7 BOTTOM FLIGHT ADJUSTMENT CYLINDERS : 7 ENTRY AND 7 EXIT MAIN DRIVE AND DRIVE MOTOR: (2) 150HP PATENT PENDING EDRIVE(TM) MAXIMUM SPEED: 150 FPM (@ 1750 RPM) PASS LINE HEIGHT: 44.25" WITH 1.25" OF GROUT. THE EXISTING PASSLINE HEIGHT IS 44" TO THE BOTTOM OF THE MATERIAL. INTERMEDIATE ROLLS: 4 HI LINE FLOW: LEFT TO RIGHT FLATNESS PRECISION: 20 TIMES "I" UNIT IMPROVEMENT ON INCOMING STRIP TO OUTGOING STRIP AT OR BELOW A MAXIMUM INCOMING CROSSBOW OF 6" OR LESS. POWER REQUIREMENTS: 460 V, 60 CYCLES, 3 PHASE 24 V DC CONTROLS

Specifications

Backup Flights Bottom	7
Backup Flights Top	7
Control Voltage V Dc	24
Drive Motor Count	2
Drive Motor Power (hp)	150
Flight Adjustment Cylinders Entry	7
Flight Adjustment Cylinders Exit	7
Frequency (Hz)	60
Intermediate Rolls Configuration	4_hi
Line Flow Direction	left_to_right
Material Types	hot_rolled_steel_black_and_p_o
Max Capacity Tensile Strength (psi)	65,000
Max Capacity Thickness (mm)	6.35
Max Capacity Width (mm)	1,828.8
Max Speed Fpm	150
Max Speed (RPM)	1,750
Min Capacity Thickness (mm)	1.524
Min Capacity Width (mm)	914.4
Pass Line Height (mm)	1,124.1
Phase	3
Thickness (mm)	6.35
Voltage (v)	460
Width (mm)	1,828.8
Work Roll Count	11
Work Roll Diameter (mm)	88.9
Work Roll Face (mm)	2,184.4