Material Handling·Bundle Turnover

ATLAS 20,000LBS BUNDLE TURNOVER

Sold by National Machinery Exchange·Available·Last verified 4h ago

Manufacturer: Atlas
Condition: Used

Description

ATLAS 20,000LBS BUNDLE TURNOVER ATLAS 20,000LBS BUNDLE TURNOVER 84" BETWEEN FRAME AT END, 162" BETWEEN FRAME AT SIDE (ENDS OF FRAMES ARE 6" AT EACH END, SO TECHNICALLY YOU COULD TURN OVER 174" WIDE MATERIAL LOADING FROM THE END) 36.5" GAP BETWEEN UPPER & LOWER ROLLS WIDE OPEN CLAMPING ACTUATED BY HYDRAULIC MOTOR/S DRIVING FOUR (4) BALL SCREW JACKS 80" ROLL FACE, 6" DIA. CONVEYOR ROLLS ON 10" CENTERS EDGE OF ROLL IS APPROX. 16" FROM THE BASE OF FRAME ON SIDE OPPOSITE OF ELECTRICAL PANELS. 10" TO END OF ROLL SHAFT THROUGH PILLOW BLOCK BEARING FLOOR TO TOP OF ROLLS IS 52.75" TURNOVER FRAME IS APPROX. 16.5' IN LENGTH 15' LONG ENTRY CONVEYOR 15' LONG EXIT CONVEYOR ELECTRICS- ALLEN BRADLEY: 2711-K5A8X PANELVIEW 550 TERMINAL & I/O'S MUST CONFIRM BUT IT'S BELIEVED TO HAVE A STERLING SCALE BUILT INTO THE CONVEYOR. CAPABLE OF SIDE LOAD AS WELL AS THE DESIGNED END LOADING. SHIPPING DIMENSIONS: 16.5'L X 13'?W X 139"H

Specifications

Capacity (kg)	9,071.85
Clamping Drive	hydraulic_motor_ball_screw_jacks
Control System	Allen Bradley PanelView 550
Entry Conveyor Length (m)	4.572
Exit Conveyor Length (m)	4.572
Floor To Roll Top Height (mm)	1,339.95
Frame Width Between Ends (mm)	2,133.6
Frame Width Between Sides (mm)	4,115.4
Gap Between Rolls (mm)	926.9
Maximum Material Width (mm)	4,419.6
Number Of Clamping Jacks	4
Roll Center Spacing (mm)	254
Roll Diameter (mm)	152.4
Roll Edge Distance From Base (mm)	406.4
Roll Face Length (mm)	2,032
Roll Shaft Extension (mm)	254
Shipping Height (mm)	3,531.6
Shipping Length (m)	5.029
Turnover Frame Length (m)	5.029