12" (305mm) X 12" (305mm) RUESCH 2 HIGH REVERSING ROLLING MILL
- Manufacturer
- RUESCH MACHINE CO.
- Model
- 2 HIGH REVERSING ROLLING MILL
- Condition
- Used
Description
12" (305mm) X 12" (305mm) RUESCH 2 HIGH REVERSING ROLLING MILL MANUFACTURER: RUESCH MACHINE CO. (USA) TYPE: 2 HIGH REVERSING ROLLING MILL PREVIOUS USE: BREAKDOWN MILL FOR GOLD AND SILVER INTERMEDIATE MILL FOR COPPER/STEEL/ALUMINUM CLADDING/BONDING MILL FOR DUAL STRIP ROLL SIZE: 12" (305MM) DIA. x 12" (305MM) FACE WIDTH ROLL BEARINGS: ROLLER BEARING SCREWDOWNS: ELECTRO-MECHANICAL MAXIMUM ROLL OPENING: 4.25" (108MM) MILL STAND CROSS SECTION: 9" (228MM) x 10" (254MM) WINDOW WIDTH: 13-1/4" (336MM) x 41" (1041MM) HIGH DIRECTION OF TRAVEL: RIGHT TO LEFT IF USED AS A CLADDING MILL REVERSING AS A STAND-ALONE MILL MILL STAND DRIVE MOTOR: 50 HP, 230/460 VOLTS, 1750 RPM, 3 PHASE, 60 HZ VARIABLE SPEED GEAR BOX: HORSBURGH & SCOTT RATIO 137.45 TO 1 MILL SPEED: 0 - 80 FPM (0 - 25 M/MIN) A.C. VARIABLE SPEED DRIVE: PARKER A.C. INTEGRATOR 690+ SERIES WITH HTTL ENCODER PAYOFF: BUYER MUST SUPPLY ROLLING MILL: AS PER SPECS ABOVE WINDER: -ENTRY STRIP SIDE GUIDES -PNEUMATIC STRIP HOLD-DOWN ROLLS -WINDER MANDREL: 2-1/2" (63.5MM) DIAMETER 9" (228MM) WIDE -VARIABLE SPEED CONTROLS NO. OF ROLLS: -FLAT ROLLS: 1 SPARE SET -SHELL ROLLS: 1 SET IN MILL FLOOR SPACE: -MILL STAND ALONE: 124" (3150MM) WIDE X 138" (3505MM) DEEP
Specifications
| Direction Of Travel | reversing |
|---|---|
| Floor Space Depth (mm) | 3,505 |
| Floor Space Width (mm) | 3,150 |
| Gearbox Manufacturer | HORSBURGH & SCOTT |
| Gearbox Ratio | 137.45 |
| Maximum Roll Opening (mm) | 108 |
| Mill Speed Max (m/min) | 25 |
| Mill Stand Cross Section Height (mm) | 254 |
| Mill Stand Cross Section Width (mm) | 228 |
| Motor Frequency (Hz) | 60 |
| Motor Phase | 3_phase |
| Motor Power (kW) | 37.285 |
| Motor (RPM) | 1,750 |
| Motor Type | variable_speed |
| Motor Voltage (v) | 230/460 |
| Previous Use | breakdown_mill_for_gold_and_silver_intermediate_mill_for_copper_steel_aluminum_cladding_bonding_mill_for_dual_strip |
| Roll Bearings | roller_bearing |
| Roll Diameter (mm) | 305 |
| Roll Face Width (mm) | 305 |
| Screwdowns | electro_mechanical |
| Variable Speed Drive | PARKER A.C. INTEGRATOR 690+ SERIES |
| Winder Mandrel Diameter (mm) | 63.5 |
| Winder Mandrel Width (mm) | 228 |
| Window Height (mm) | 1,041 |
| Window Width (mm) | 336 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Coil Processing
WATERBURY FARREL ZR 16-15 SENDZIMIR 12 HIGH REVERSING ROLLING MILL
Waterbury Farrel USA · ZR 16-15 Sendzimir 12 High
National Machinery Exchange
1100MM (43") X 0.089MM LOEWY ROBERTSON 4-HI ALUMINUM FOIL ROLLING MILL
Loewy Robertson
National Machinery Exchange
WATERBURY-FARREL #ZR24-14, ROLLING MILL
Waterbury-Farrel · ZR24-14
National Machinery Exchange
INNOCENTI ZR23-25 SENDZMIR 20HI ROLLING MILL
INNOCENTI · ZR23-25 · 1983
National Machinery Exchange
WATERBURY FARREL ZR33-13 SENDZIMIR ROLLING MILL
Waterbury Farrel · ZR33-13 · 1976
National Machinery Exchange
WATERBURY FARREL ZR16-835 SENDZIMIR 12-HI ROLLING MILL
Waterbury Farrel · ZR16-8.5
National Machinery Exchange
