Forming·Forming Roll

FARNHAM #1558-E FORMING ROLL

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: Farnham
Model: 1558-E
Condition: Used

Description

FARNHAM #1558-E FORMING ROLL FARNHAM FORMING ROLL MODEL 1558-E SERIAL NUMBER 10-40-9 SPECIFICATIONS CAPACITY: OVERALL LENGTH OF ROLLS 15' (180") (4,572MM) THICKNESS 0.63" (16.002MM) RADIUS, MINIMUM 0.62" (15,748MM) ROLL DIAMETER: TOP ROLL 1" (25.4MM) BOTTOM ROLLS 1-11/16" (42.8625MM) TOP ROLL LIFT MOTORS GEARED MOTOR TO SCREW LOCATED ON EACH END. MECHANICAL COUNTER FOR EACH END OF TOP ROLL EACH MOTOR WITH MECHANICAL BRAKE BOTTOM ROLLS: EACH WITH IN/OUT ADJUSTMENT AND INDICATORS LOCATED ON BOTH END. TIE ROD BED ADJUSTMENT TO PUT SLIGHT BOW IN BED. MOTOR DRIVES: WIRED 440 VOLTS, 3 PHASE ALL ROLLS DRIVEN BY 2-SPEED MOTOR......... 1 HP. (0.74 KW) & 2 HP. (1.47 KW) 440 VOLTS TOP ROLL ELEVATION MOTORS (TWO) EACH........ _ HP. (0.552 KW) 440 VOLTS CONTROLS: ROLL DRIVE MOTOR START/STOP BUTTONS. TWO ROLL SPEED IN FORWARD/ ONE ROLL SPEED IN REVERSE. TOP ROLL UP/DOWN BUTTONS TO ADJUST BOTH END ELEVATION SCREWS AT SAME TIME. TOP ROLL UP/DOWN BUTTONS TO INDEPENDENTLY ADJUST EACH END ELEVATION SCREWS. SAFETY STOP LINE LOCATED ON FRONT AND REAR. COMPLETE FACTORY SAFETY GUARDS DIMENSIONS 36" FB X 242" LR X 69" HT. (914.4MM FB X 6146.8MM LR X 1752.6MM HT. APPROXIMATE WEIGHT 8000 LBS.

Specifications

Bottom Roll Diameter (mm)	42.863
Height (mm)	1,752.6
Length (mm)	6,146.8
Minimum Radius (mm)	15.748
Overall Length Of Rolls (mm)	4,572
Roll Drive Motor Phase	3
Roll Drive Motor Power (kW)	1.47
Roll Drive Motor Voltage (v)	440
Serial Number	10-40-9
Thickness (mm)	16.002
Top Roll Diameter (mm)	25.4
Top Roll Elevation Motors Power (kW)	0.552
Top Roll Elevation Motors Voltage (v)	440
Weight (kg)	3,628.739
Width (mm)	914.4