Forming·Bending Machine

HUFFORD A10 BENDING MACHINE WITH HYDRAULIC POWERPACK

Sold by National Machinery Exchange·Available·Last verified 4h ago

Manufacturer: Hufford
Model: A10
Condition: Used

Description

HUFFORD A10 BENDING MACHINE WITH HYDRAULIC POWERPACK SPECIFICATIONS FORMING TONNAGE .............................. 17-1/2" DISTANCE BETWEEN JAWS: Max Length of Part Tension Cylinders retracted..... 205" (5207mm) Min Length of Part Tension Cylinders extended....... 10" (254 mm) TENSION CYLINDER PULL: Maximum............................ 35,000 lbs. Minimum ............................ 3,500 lbs. @ Operation PSI..................... 2,000 TENSION CYLINDER STROKE each ....... 18-1/2" TENSION CYLINDER ROTATION .......... +/- 25 Degrees ARMS: SWING Simultaneous Arm Motion Arm swings 10 Forward to 90Back. WRAPPING SPEED RANGE ............... Adjustable DIE LENGTH at full tonnage and 180 bend: Minimum .................................. 20" (508 mm) Maximum ................................. 68" (1727.2 mm) DIE TABLE: (Pre drilled & threaded) .... 5/8" Working Surface, W x D............... 65" x 30" (1651 x 762 mm) Height Table To Floor ................. 35" (889 mm) MOTOR DRIVE: Wired 440 volts, 3 Phase Hydraulic Pump ............................15 H.P. 220/440 volts CONTROLS: Hand Push Buttons, with Start and Stop Buttons EQUIPPED WITH: 1- set 4X5 Jaws with Hydraulic Clamping 1 LOT MISC. DIES COMPLETE FACTORY SAFETY GUARDS Dimensions 65 w x 170" d x 55" Ht Wt 12000 lbs.

Specifications

Arm Swing Range Degrees	10_to_90
Die Length Max (mm)	1,727.2
Die Length Min (mm)	508
Die Table Thickness Inches	0.625
Forming Tonnage (lbs)	17.5
Hydraulic Pump Power (hp)	15
Hydraulic Pump Voltage (v)	220_440
Machine Depth (mm)	4,318
Machine Height (mm)	1,397
Machine Width (mm)	1,651
Max Part Length (mm)	5,207
Min Part Length (mm)	254
Motor Phase	3_phase
Motor Voltage (v)	440
Operating Weight (kg)	5,443.1
Table Height (mm)	889
Tension Cylinder Operating Pressure (psi)	2,000
Tension Cylinder Pull Max (lbs)	35,000
Tension Cylinder Pull Min (lbs)	3,500
Tension Cylinder Rotation Degrees	25
Tension Cylinder Stroke (mm)	469.9
Working Surface Depth (mm)	762
Working Surface Width (mm)	1,651