21"/30" x 100" TARNOW GAP BED ENGINE LATHE MODEL# TUJ 50
- Manufacturer
- TARNOW
- Model
- TUJ 50
- Year
- 1979
- Condition
- Used
Description
21"/30" x 100" TARNOW GAP BED ENGINE LATHE MODEL# TUJ 50 21"/30" x 100" TARNOW GAP BED ENGINE LATHE MODEL: TUJ 50, S/N: 4580, NEW: 1979 SPECIFICATIONS: SWING OVER BED .......................... 21" SWING IN GAP ............................ 30" SWING OVER CARRIAGE ..................... 13" DISTANCE BETWEEN CENTERS ................ 100" HOLE THRU SPINDLE ....................... 2-1/16" SPINDLE SPEEDS (16) ..................... 35 - 1800 RPM TAILSTOCK SPINDLE CENTER TAPER .......... #5 MORSE TAILSTOCK SPINDLE TRAVEL ................ 6" TAILSTOCK SPINDLE DIAMETER .............. 3-1/8" WIDTH OF BED ............................ 14-1/2" FEEDS: LONGITUDINAL ....................... .0036 - .18 IPR CROSS .............................. .0018 - .9 IPR THREADS: INCH ............................... 1 - 28 TPI METRIC ............................. .4 - 28 mm APPROX WEIGHT .......................... 6,000 LBS EQUIPPED WITH: - INCH & METRIC THREADING CAPABILITY THROUGH QUICK CHANGE GEARBOX - 10" 3-JAW CHUCK - 16" 4-JAW CHUCK - ROLLER TYPE STEADY REST - TOOLPOST - INDUCTION HARDENED BEDWAYS - THREADING DIAL - COOLANT SYSTEM - (2) REMOVABLE CHIP PANS - 10 HORSE POWER SPINDLE DRIVE MOTOR
Specifications
| Bed Width (mm) | 368.3 |
|---|---|
| Chuck 3 Jaw Diameter (mm) | 254 |
| Chuck 4 Jaw Diameter (mm) | 406.4 |
| Cross Feed Max Mm Per Rev | 22.86 |
| Cross Feed Min Mm Per Rev | 0.046 |
| Distance Between Centers (mm) | 2,540 |
| Hole Thru Spindle (mm) | 52.388 |
| Inch Thread Max Tpi | 28 |
| Inch Thread Min Tpi | 1 |
| Longitudinal Feed Max Mm Per Rev | 4.572 |
| Longitudinal Feed Min Mm Per Rev | 0.091 |
| Metric Thread Max (mm) | 28 |
| Metric Thread Min (mm) | 0.4 |
| Operating Weight (kg) | 2,721.554 |
| Serial Number | 4580 |
| Spindle Drive Power (kW) | 7.457 |
| Spindle Speed Max (RPM) | 1,800 |
| Spindle Speed Min (RPM) | 35 |
| Swing In Gap (mm) | 762 |
| Swing Over Bed (mm) | 533.4 |
| Swing Over Carriage (mm) | 330.2 |
| Tailstock Spindle Center Taper | #5 Morse |
| Tailstock Spindle Diameter (mm) | 79.375 |
| Tailstock Spindle Travel (mm) | 152.4 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Machine Tools
13" x 40" cc, CLAUSING, 1989,
Clausing · 1300 · 1989
Machine Tool Repair
72",84" SWING WEBSTER & BENNETT, No. EH-72, 1961,4-JAW CHUCK,5 STATION,72"UNDER
Webster & Bennett · EH-72 · 1961
Machine Tool Repair
WILTON TOOLROOM LATHE,TRL-1118-3,INCH/METRIC,2003,3-JAW CHUCK,COLLETS
Wilton · TRL-1118-3 · 2003
Machine Tool Repair
IKEGAI GENESIS 1208, FANUC 21IT, 8"Chk,SPINDLE BORE 2,4", 2001,
IKEGAI · GENESIS 1208 · 2001
Machine Tool Repair
19" x 78" cc, LEBLOND MAKINO, 1985,INCH/METRIC THREADING, TAPER, 16" CHUCK
LeBlond Makino · 1985
Machine Tool Repair
HURCO TM-6, MAX CONTROL, 6"Chk, BAR CAPACITY 1.77", 2006, 6,000 RPM
HURCO · TM-6 · 2006
Machine Tool Repair
