Other

23.58" (600MM) / 17.68" (450MM) X 216" (5500MM) HERKULES WS600/450 X 5500 CNC

Sold by National Machinery Exchange·Available·Last verified 3h ago

Condition: Used

Description

23.58" (600MM) / 17.68" (450MM) X 216" (5500MM) HERKULES WS600/450 X 5500 CNC YEAR - 1988 MODEL - WS600/450 X 5500 TYPE - CNC ROLL GRINDER STATUS - NOT IN OPERATION WORKING RANGE: ROLL DIAMETER RANGE - 23.58" (600MM) LENGTH BETWEEN THE CENTERS - 216" (5500MM) GRINDING LENGTH - 197" MIN-MAX GRINDING DIAMETER - 0 - 55" MAX WORK PIECE WEIGHT IN STEADY REST - 17,600 LBS. MAX WORK PIECE WEIGHT IN CHOCKS - 88,000 LBS HEADSTOCK SPEEDS - 1.5-60 RPM DRIVE POWER - 34 KW TYPE OF DRIVE - TOOTH CHAIN CENTER ACCOMODAITON HOEL - 3.93" DIAMETER, 1:10 TAPER LONGITUDINAL ADJUSTMENT OF FACEPLATE - 6" WORK PRESSURE OF HEADSTOCK HYDRAULIC - 25 BAR TAILSTOCK DRESSSING TOOL ACCOMODATION HOLE - MORSE TAPER #1 CENTER ACCOMODATION HOEL - 3.93" DIAMETER, 1:10 TAPER MAX ADJUSTMENT OF CENTER SLEEVE - 6" ADJUSTING PRESSURE OF HYDRAULIC - 275 BAR HYDRAULIC PRESSURE TO RELEASE THE CLAMPING - 300 BAR RAPID MOTION - 53"/MIN GRINDING WHEEL DIMENSIONS - 35.4 X 6 (4) X 20 INCHES SPEEDS - 400 - 1200 RPM DRIVE POWER - 110 KW MAX GRINDING CARRIAGE MOVEMENTS FEEDS - 4 - 160 IN/MIN RAPID MOTION - 160 IN/MIN SLOW MOTION - 4 IN/MIN HYDRAULIC DISCHARGE OF CARRIAGE - 4 BAR MAX GRINDNG HEAD INFEEDS INFEEDS BY HAND - 0.0004" AUTOMATIC INFEED ON CARRIAGE REVERSE - 0.0004" - 0.0035" CONTINUOUS INFEED - 0.0004" - 0.008"/MIN CONTINOUS MICRO ADJUSTMENT - 0.00004" - 0.002"/MIN RAPID MOTION - 30"/MIN SLOW MOTION - 1"/MIN MICRO ADJUSTMENT BY HAND - 1 GRADUATION - 0.00004" CONTINUOUS FINEST IN FEED - 0.00004" - 0.002" FORM GRINDING DEVICE MAX VALUE IN REFERENCE TO DIAMETER - 0.2" MAX CORRECTION VALUES FOR CARRIAGE PATH CORRECTION (RADIUS) - 0.039" CORRECTIVE GRINDING (RADIUS) - 0.0039" STEADY RESTS ACCOMODATION CAPACITY - 23.6" - 31.5" DIAMETER 17.3" DIAMETER 8.66" - 12" DIAMETER ADJUSTING SPEED - 0.04"/MIN 1 IMPULS - 0.0002"