76" x .100" x 72K AUTOMATIC FEED TRAPEZOID CUT-TO-LENGTH LINE - UPGRADE 2020
- Manufacturer
- Automatic Feed Company
- Year
- 1989
- Condition
- Used
Description
76" x .100" x 72K AUTOMATIC FEED TRAPEZOID CUT-TO-LENGTH LINE - UPGRADE 2020 LINE OVERVIEW: THIS IS AUTOMATIC FEED COMPANY TRAPEZOID CUT TO LENGTH LINE HAD A MULTIMILLION DOLLAR CONTROLS, MOTOR AND STACKER UPGRADE IN 2020 BY AUTOMATIC FEED COMPANY THE LINE IS RUNNING AND IN OPERATION IN USA PLANT. GENERAL LINE SPECIFICATIONS: MANUFACTURER - AUTOMATIC FEED COMPANY YEAR - 1989 (NEW CONTROLS UPGRADE 2020) TYPE - TRAPEZOID CUT TO LENGTH LINE MATERIAL - 0.020" - 0.100" YIELD STRENGTH - 25,000 PSI - 40,000 PSI DEPENDING ON WIDTH & THICKNESS A HIGHER YIELD STRENGTH IS FEASIBLE. CONTACT OUR OFFICE FOR FURTHER INFORMATION WIDTH RANGE - 24" - 76" TRIM WIDTH - 74" ID RANGE - 19" - 25" OD RANGE - 36" - 84" LINE SPEED - 300 FPM SHEAR SPM - 18 - 70 SHEAR ANGLE CUTS - 30 DEGREES MAXIMUM +/- SHEAR STROKE - 6" SHEAR SHUT HEIGHT - 30" STACKER WIDTH RANGE - 24" - 74" STACKER LENGTH RANGE - 24" - 168" MAXIMUM STACK WEIGHT - 20,000# MAXIMUM LIFT & TRANSPORT WEIGHT - 40,000# MAXIMUM STACK HEIGHT - 24" (INCLUDING DUNNAGE) LINE DIRECTION - RIGHT TO LEFT GENERAL LINE COMPONENTS: (4) STATION TRAVELING COIL STORAGE RACK V-TYPE TRAVELING COIL CAR W/ HYDRAULIC LIFT ANTI-TIP GUIDES DUAL STUB MANDREL EXPANDING UNCOILER AC MOTOR - 125 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER HOLDDOWN ROLL & PEELER ASSEMBLY PINCH ROLL AND ENTRY CROP SHEAR ASSEMBLY W/ SCRAP CONVEYOR EDGE TRIMMING UNIT BUTECH MDL. SC-250 SCRAP CHOPPERS (4) AC MOTORS - 30 HP, 1750 RPM & (3) SERIES 2400 MODULAR FLUX VECTOR AC INVERTERS (FOR THE PINCH ROLL, SCRAP CHOPPER, ENTRY PINCH ROLL, AND EXIT PINCH ROLL) WASHING & RINSE UNIT WITH HIGH PRESSURE PUMP & FILTER SYSTEM 19 ROLL 5HI PRECISION LEVELER 1.9375" ROLL DIAMETER 76" WIDTH AC MOTOR - 250 HP, 1150 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER LOOPING PIT #1 & INSPECTION TABLE ECT STRIP OILER PINCH ROLL ASSEMBLY LOOPING PIT #2 THREADING TABLE DIGITAL CONTROLLED ROLL FEED AC MOTOR - 100 HP, 1000 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER UPCUT SHEAR AC MOTOR - 30 HP, 0-1750 RPM OSCILLATING/TRAPEZOID SHEAR ASSMEBLY DIES STYLE - CASSSETE TYPE - MULTIPLE DIES AVAILABLE AC MOTOR - 75 HP, 1150 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER BELT RUNOUT CONVEYOR AC MOTOR - 30 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER FOR EACH STACKER MAGNETIC BELT CONVEYOR & TWO STATION MAGNETIC STACKER AC MOTOR - 30 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER FOR EACH STACKER NEW MAGNET SYSTEM INSTALLED IN 2020 WITH FUTURE AREAS FOR VACCUUM CHAMBERS REJECT PILER LEFT AND RIGHT DISCHARGE TRANSFER CONVEYOR AC MOTOR - 15 HP, 1750 RPM & SERIES 2400 MODULAR FLUX VECTOR AC INVERTER 100' + RUNOUT OUT CONVEYOR ON RIGHTHAND (R-L DIRECTION) OF STACKER WITH SCALES EXTENSIVE ELECTRICAL AND CONTROLS UPGRADE IN 2020 INCLUDING: NEW ALLEN BRADLEY PLC UPGRADE FOR LINE AND STACKER WITH CONTROLOGIX WITH GUARDLOGIX PROCESSORS & DYNICS TOUCHSCREENS NEW COIL LINE & STACKER ADJUSTMENT FEEDBACK DEVICES AUTOMATIC FEED COMPANY'S AUTOMATION INTEGRATION MANAGER (AIM) VISUAL BASIC OPERATOR INTERFACE NEW SAFETY DEVICES ON COIL LINE AND STACKER 108 NEW MAGNET ASSEMBLIES FOR THE STACKER AND ALLOW ROOM FOR VACCUUM CHAMBERS IN THE FUTURE UNICO AC SERVER DRIVES INTEGRATED TRHOUGHOUT THE LINE UNICO SERIES 4000 SERVO DRIVE CONTROLLERS THROUGHOUT THE LINE PROVIDE AUTOTHREAD CAPABILITY STARTING AFTER THE CROP SHEAR
Specifications
| Coil Width Range Min (mm) | 609.6 |
|---|---|
| Coil Width Range (mm) | 609.6 |
| Controls Upgrade Year | 2,020 |
| Id Range Mm Max | 635 |
| Id Range (mm/min) | 482.6 |
| Leveler Motor (hp) | 250 |
| Leveler Motor (RPM) | 1,150 |
| Leveler Roll Count | 19 |
| Leveler Roll Diameter (mm) | 49.213 |
| Leveler Width (mm) | 1,929.4 |
| Line Direction | right_to_left |
| Line Speed Fpm | 300 |
| Material Thickness Max (mm) | 2.54 |
| Material Thickness Range (mm) | 2.54 |
| Maximum Lift Transport Weight (kg) | 18,143.7 |
| Maximum Stack Height (mm) | 609.6 |
| Maximum Stack Weight (kg) | 9,071.85 |
| Od Range Mm Max | 2,133.6 |
| Od Range (mm/min) | 914.4 |
| Roll Feed Motor (hp) | 100 |
| Roll Feed Motor (RPM) | 1,000 |
| Runout Conveyor Length (m) | 30.48 |
| Shear Angle Degrees | 30 |
| Shear Shut Height (mm) | 762 |
| Shear Spm Max | 70 |
| Shear Spm (min) | 18 |
| Shear Stroke (mm) | 152.4 |
| Stacker Length Range Mm Max | 4,267.2 |
| Stacker Width Range Mm Max | 1,879.6 |
| Trapezoid Shear Motor (hp) | 75 |
| Trapezoid Shear Motor (RPM) | 1,150 |
| Trim Width (mm) | 1,879.6 |
| Uncoiler Motor (hp) | 125 |
| Uncoiler Motor (RPM) | 1,750 |
| Upcut Shear Motor (hp) | 30 |
| Upcut Shear Motor Rpm Max | 1,750 |
| Yield Strength Psi Max | 40,000 |
| Yield Strength Psi (min) | 25,000 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Coil Processing
60" x .090" x 25,000 Lb MCKAY Cut-To-Length Line, 12' Stacker, L-R Direction
MCKAY
Bass Machinery
60" x .075" x 20,000 Lb IOWA PRECISION Cut-To-Length Line, .125" Aluminum
Iowa Precision · 6012
Bass Machinery
72" x .105" x 25,000 Lb ROWE Cut-to-Length Line
ROWE
Bass Machinery
72" x .25" x 40,000 Lb MCKAY Cut-to-Length Line, Left-to-Right
MCKAY
Bass Machinery
60" x .065" x 40,000 Lb ROWE Cut-To-Length Line, 12' Stacker, R-L Direction
ROWE · 2002
Bass Machinery
72" x .230" x 60,000 Lb HERR VOSS / PROECO Cut-to-Length Line, Left-to-Right
Herr Voss / Proeco · L-11-3-5-72-4HI
Bass Machinery
