72" WEAN DANIELLI / MECO PUSH PULL PICKLE LINE WITH TEMPER MILL
- Manufacturer
- Wean Danielli / Meco
- Model
- 7200
- Condition
- Used
Description
72" WEAN DANIELLI / MECO PUSH PULL PICKLE LINE WITH TEMPER MILL 72" x .060" - .500" carbon steel Thickness x 40 Ton Coils Speed of line 200 and 400 FPM Coil Weight: 20,000# - 80,000# Coil OD: 42" - 80" Coil ID: 20" with cone inserts, 24" - 36" mandrel Coil ID exit 24" Consisting of: Coil Transfer Car Double End Expanding Mandrel Uncoiler 2-75 HP DC Drag generators peeler pinch roll combination 5 roll flattener 200 HP DC 2 HI MECO Temper Mill included with Shape Correction/roll bending 80" x 38" diameter work rolls Hydraulic screw downs 2 400 HP DC Motors Recoiler and 400 HP DC drive for temper pass only processing EXIT SECTION Edge Trimmer, 125 HP DC In Line Slitter Head, 150 HP DC 3 roll flex roll processor Turret Recoiler with full hydraulic drum 250 HP DC motor floor standing exit coil car 4 arm exit turnstile OTHER COMPONENTS 80" Peabody Electrostatic Oiler 2 sets of complete chocks and rolls for the temper mill approximately 3,000 square feet of dedicated spare parts (Detailed list to be provided) General Electric controls and drives on the pickling portion
Specifications
| Coil Id Exit (mm) | 609.6 |
|---|---|
| Coil Id Max (mm) | 914.4 |
| Coil Id Min (mm) | 508 |
| Coil Od Max (mm) | 2,032 |
| Coil Od Min (mm) | 1,066.8 |
| Coil Weight Capacity Max (kg) | 36,287.4 |
| Coil Weight Capacity Min (kg) | 9,071.85 |
| Edge Trimmer (hp) | 125 |
| Exit Recoiler Motor (hp) | 250 |
| Flattener (hp) | 200 |
| Line Speed Max Fpm | 400 |
| Line Speed Min Fpm | 200 |
| Line Width (mm) | 1,828.8 |
| Mandrel Diameter Max (mm) | 914.4 |
| Mandrel Diameter Min (mm) | 609.6 |
| Material Thickness Max (mm) | 12.7 |
| Material Thickness Min (mm) | 1.524 |
| Material Type | carbon_steel |
| Oiler Width (mm) | 2,032 |
| Recoiler Motor (hp) | 400 |
| Slitter Head (hp) | 150 |
| Spare Parts Area Sqft | 3,000 |
| Temper Mill Motor (hp) | 800 |
| Temper Mill Work Roll Diameter (mm) | 965.2 |
| Temper Mill Work Roll Width (mm) | 2,032 |
| Uncoiler (hp) | 150 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Coil Processing
SQUIRE-COGSWELL, No. 140BDLX,
Squire-Cogswell · 140BDLX
Standard Industrial Machinery
14 Ga. x 96" NATIONAL, No. N9614,
National · N9614
Standard Industrial Machinery
6000 Lb., DURANT, No. VSHD584M,
Durant · VSHD584M
Standard Industrial Machinery
4000 Lb. PA No. PR 4L,horizontal,42" table,6" STOCK WIDTH,36" STACKING HEIGHT
PR 4L
Spirit Machinery
14 STND SME,3.5"SHAFT DIA,KEYWAY IS .625"WIDE X .375"DEEP,100 FPM,40 HP
SME · 14 STND
Spirit Machinery
2000 Lb. LITTELL No. #20-12,15-20"INSIDE DIAM, 60"OUTSIDE DIAM,4 KEEPERS
Littell · #20-12 · 2000
Spirit Machinery
