37" X .063" X 27,000# HERR VOSS TENSION LEVELING LINE, YR 1992
- Manufacturer
- Herr Voss
- Year
- 1992
- Condition
- Used
Description
37" X .063" X 27,000# HERR VOSS TENSION LEVELING LINE, YR 1992 GENERAL LINE SPECIFICATIONS MANUFACTURER - HERR VOSS YEAR - 1992 MATERIAL - STAINLESSS STEEL & INCONEL YIELD - 100,000 PSI MAX SHEAR STRENGTH - 80,000 PSI MAX COIL WEIGHT - 27,000# MAX COIL WIDTH - 37" MIN COIL WIDTH - 24" COILRANGE - 60" COIL ID - 20" GAUGE RANGE - .008" - .063" LINE SPEED - 300-600 FPM ELECTRICITY - 480 V, 3 PH, 60 CYCLE LINE DIRECTION - LEFT TO RIGHT STATUS - INSTALLED AND OPERATING LINE COMPONENTS L-SHAPED TRAVERSING ELEVATING COIL CAR MANDREL UNCOILER W/ OVERARM SNUBBER ROLL & PAPER WINDER HYDRAULIC EXPANSION WICHITA WATER COOLED BRAKE HYDRAULIC PEELER TABLE POLYEROTHANE ENTRY PINCH ROLLS EDGE GUIDE SYSTEM ENTRY HYDRAULIC CROP SHEAR SCRAP CART EXIT TABLE VERTICAL PINCH ROLL CENTERING GUIDES BEHLEN STITCHER ENTRY ROLLER GUIDE (4) ROLL S-TYPE DRAG TENSION BRIDLE ROLLS EACH ROLL MOTOR CONNECTED TO NUTTAL GEAR BOX AND UNIVERSAL CONNECTION TO ROLL #1 ROLL MOTOR - 15 HP #2 ROLL MOTOR - 25 HP #3 ROLL MOTOR - 50 HP #4 ROLL MOTOR - 100 HP 5-ROLL PRECISION TENSION LEVELER - 3 OVER 2 LEVELER PIVOT DEVICE 1 1/2" DIAMETER LEVELING ROLLS (4) ROLL S-TYPE DRIVE TENSION BRIDLE ROLLS EACH ROLL MOTOR CONNECTED TO NUTTAL GEAR BOX AND UNIVERSAL CONNECTION TO ROLL #1 ROLL MOTOR - 150 HP #2 ROLL MOTOR - 100 HP #3 ROLL MOTOR - 50 HP #4 ROLL MOTOR - 25 HP 6' INSPECTION TABLE THICKNESS GAUGE (SOURCE NOT INCLUDED) EXIT HYDRAULIC CROP SHEAR SCRAP CART HYDRAULIC EXIT CARROYOVER TABLE EDGE GUIDE SYSTEM DEFLECTOR ROLL PAPER UNWINDER HYDRAULIC THREADING TABLE MANDRELL UNCOILER WITH HOLDDOWN ROLL HYDRAULIC EXPANSION BELT WRAPPER L-SHAPED TRAVERSING ELEVATING COIL CAR ELECTRICS - GE DRIVE SYSTEMS CONTROLS, ELECTRICS, HYDRAULIC UNIT CLICK ON THE FOLLOWING LINK TO WATCH A VIDEO OF THE MACHINE https://youtu.be/-PgfYOcQif8
Specifications
| Coil Id (mm) | 508 |
|---|---|
| Coil Weight (kg) | 12,247.4 |
| Coil Width Max (mm) | 939.8 |
| Coil Width Min (mm) | 609.6 |
| Drag Roll 1 Motor (hp) | 15 |
| Drag Roll 2 Motor (hp) | 25 |
| Drag Roll 3 Motor (hp) | 50 |
| Drag Roll 4 Motor (hp) | 100 |
| Drag Tension Bridle Rolls | 4 |
| Drive Roll 1 Motor (hp) | 150 |
| Drive Roll 2 Motor (hp) | 100 |
| Drive Roll 3 Motor (hp) | 50 |
| Drive Roll 4 Motor (hp) | 25 |
| Drive Tension Bridle Rolls | 4 |
| Frequency (Hz) | 60 |
| Gauge Range Max (mm) | 1.6 |
| Gauge Range Min (mm) | 0.203 |
| Inspection Table Length (ft) | 6 |
| Leveling Configuration | 3_over_2 |
| Leveling Roll Diameter (mm) | 38.1 |
| Leveling Rolls Count | 5 |
| Line Direction | left_to_right |
| Line Speed Max Fpm | 600 |
| Line Speed Min Fpm | 300 |
| Material Capability | stainless_steel_inconel |
| Phase | 3 |
| Shear Strength (psi) | 80,000 |
| Status | installed_and_operating |
| Voltage (v) | 480 |
| Yield Strength (psi) | 100,000 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Coil Processing
1650MM (65") X 2MM STAMCO TENSION LEVELING LINE
STAMCO USA · 1992
National Machinery Exchange
200MM KZ TENSION LEVELING LINE W/ INLINE SLITTER
KZ
National Machinery Exchange
SQUIRE-COGSWELL, No. 140BDLX,
Squire-Cogswell · 140BDLX
Standard Industrial Machinery
6000 Lb., DURANT, No. VSHD584M,
Durant · VSHD584M
Standard Industrial Machinery
14 Ga. x 96" NATIONAL, No. N9614,
National · N9614
Standard Industrial Machinery
2000 Lb. LITTELL No. #20-12,15-20"INSIDE DIAM, 60"OUTSIDE DIAM,4 KEEPERS
Littell · #20-12 · 2000
Spirit Machinery
