Coil Processing·Pilger Mill

2 1/2" MCKAY COLD PILGER MILL REBUILT FOR CONTINUOUS OPERATION

Sold by National Machinery Exchange·Available·Last verified 4h ago

Manufacturer: McKay
Model: 2-1/2" Pilger Mill
Condition: Used

Description

2 1/2" MCKAY COLD PILGER MILL REBUILT FOR CONTINUOUS OPERATION MCKAY 2-1/2" PILGER MILL UPGRADED TO CONTINUOUS OPERATION MAXIMUM DIAMETER STARTING SHELL: 2 3/4" FINISHED TUBE SIZE RANGE: 3/4" TO 2 1/4" MAXIMUM LENGTH STARTING SHELL: 20' - 0" DIE DIAMETER: MAXIMUM: 14.250" MINIMUM: 14.000" WORKING DIE LENGTH: 18.50" MACHINE SPEED RANGE: 55 TO 165 RPM MACHINE FEED RANGE PER REVOLUTION: .080" - .700" MAIN DRIVE MOTOR HP: 200 ELECTRICAL: AC 220/440V, 3 PH, 60 CYCLE DC 230V CONTROL CIRCUITS 110V TUBE TURNING: ENTRY END 26 DEGREES - 4' EXIT END 50 DEGREES - 04' LOCATION, INSTALLED IN FACTORY USA PURCHASE PRICE IS A BUDGET PRICE INCLUDING REMOVAL AND TRANSPORTATION, REPLACE SADDLE, REBUILT CRANK NEW FOUNDATION NEW TOOLING (1SET) FEED SYSTEM - MODIFIED BED (2), NEW CARRIAGES (2), FEED BED ROD LOCKS (2), CENTERS (5), PINCH ROLLS (6), TUBE DRIVERS (2), "V" TROUGH, LOAD TABLE, HYDRAULICS, ELECTRONICS. FULL RING DIE DESIGN WITH 24" STROKE, AUXILLIARY GUIDES, MANDRELS, (2) SERVO DRIVES FOR FEEDING ROD LOCK TURNING,TOUCH SCTEEN CONTROLS.

Specifications

Control Circuits Voltage (v)	110
Die Diameter Maximum Inches	14.25
Die Diameter Maximum (mm)	361.95
Die Diameter Minimum Inches	14
Die Diameter Minimum (mm)	355.6
Electrical Frequency (Hz)	60
Electrical Phase	3
Electrical Voltage Ac (v)	220/440
Electrical Voltage Dc (v)	230
Entry End Angle Degrees	26
Exit End Angle Degrees	50
Finished Tube Size Range Max Inches	2.25
Finished Tube Size Range Max (mm)	57.15
Finished Tube Size Range Min Inches	0.75
Finished Tube Size Range Min (mm)	19.05
Machine Feed Range Per Revolution Max Inches	0.7
Machine Feed Range Per Revolution Max (mm)	17.78
Machine Feed Range Per Revolution Min Inches	0.08
Machine Feed Range Per Revolution Min (mm)	2.032
Machine Speed Range Max (RPM)	165
Machine Speed Range Min (RPM)	55
Main Drive Motor (hp)	200
Main Drive Motor (kW)	149.14
Maximum Diameter Starting Shell Inches	2.75
Maximum Diameter Starting Shell (mm)	69.85
Maximum Length Starting Shell Feet	20
Maximum Length Starting Shell (m)	6.096
Nominal Size Inches	2.5
Operation Type	continuous
Ring Die Stroke Inches	24
Ring Die Stroke (mm)	609.6
Servo Drives Count	2
Working Die Length Inches	18.5
Working Die Length (mm)	469.9