8" I2S SIZING ROLLING MILL (RECONDITIONED 2014)
- Manufacturer
- I2S
- Year
- 2014
- Condition
- Used
Description
8" I2S SIZING ROLLING MILL (RECONDITIONED 2014) 5.5" x 8" I2S SIZING MILL (RECONDITIONED IN 2014) Mill Type 2 Hi - Single Direction Roll Diameter 5.25"max 4.75"min Roll Face 8" Roll Material Forged Alloy steel Roll hardness 64 - 66 Rc"C - body 60 - 62 Rc"C - necks Roll bearings Needle type Rolling Force Cap. 100,000 Lbs Mill Drive One GE DC motor 25Hp @ 1750RPM Mill Speed 80 fpm Pass Line 38" Above Floor Level Hydraulic Screwdown Yes Mill will require electrics
Specifications
| Mill Speed Fpm | 80 |
|---|---|
| Mill Type | 2 Hi - Single Direction |
| Motor Manufacturer | GE |
| Motor Power (kW) | 18.643 |
| Motor (RPM) | 1,750 |
| Pass Line Height (mm) | 965.2 |
| Roll Bearings | Needle type |
| Roll Diameter Max (mm) | 133.35 |
| Roll Diameter Min (mm) | 120.65 |
| Roll Face (mm) | 203.2 |
| Roll Hardness Body Rc | 64-66 |
| Roll Hardness Necks Rc | 60-62 |
| Roll Material | Forged Alloy steel |
| Rolling Force Capacity (kg) | 45,359.237 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Coil Processing
SQUIRE-COGSWELL, No. 140BDLX,
Squire-Cogswell · 140BDLX
Standard Industrial Machinery
14 Ga. x 96" NATIONAL, No. N9614,
National · N9614
Standard Industrial Machinery
6000 Lb., DURANT, No. VSHD584M,
Durant · VSHD584M
Standard Industrial Machinery
4000 Lb. PA No. PR 4L,horizontal,42" table,6" STOCK WIDTH,36" STACKING HEIGHT
PR 4L
Spirit Machinery
14 STND SME,3.5"SHAFT DIA,KEYWAY IS .625"WIDE X .375"DEEP,100 FPM,40 HP
SME · 14 STND
Spirit Machinery
2000 Lb. LITTELL No. #20-12,15-20"INSIDE DIAM, 60"OUTSIDE DIAM,4 KEEPERS
Littell · #20-12 · 2000
Spirit Machinery
