Machine Tools·Drilling Tapping Machine

STANDARD #10-902 TOOL SECONDARY OPERATION DRILLING AND TAPPING MACHINE

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: Standard Tool
Model: 10-902
Condition: Used

Description

STANDARD #10-902 TOOL SECONDARY OPERATION DRILLING AND TAPPING MACHINE BRAss - ALUMINUM .......................... 1/2" - 20" FEED RATE FORWARD OR BACK (@ 80 PSI)....... 0 - 150 IPM FEED RATE FORWARD OR BACK ................. 0 - 3" SPINDLE SPEEDS WITH 1725 RPMS WEIGHT .................................... 3,000 LBS, O.A. DIM. ................................ 59" X 73" X 75" X 77" FOUR STATION: THREE VERTICAL, ONE HORIZONTAL PNEUMATICALLY POWERED, HYDRAULICALLY CONTROLLED EQUIPPED WITH: MOUNTED CONTROLS - ELECTRICAL CABINET THREE 1 HP 1725 RPM 230/460 VOLTS 3.3/1.6 AMPS 3 PHASE ONE 1/2 HP 1725 RPM 230/460 VOLTS TABLE MOTOR

Specifications

Control Type	hydraulic
Feed Pressure (psi)	80
Feed Rate Forward Back Ipm Max	150
Feed Rate Forward Back Mm Max	76.2
Horizontal Stations	1
Main Motor Amperage (a)	3.3/1.6
Main Motor (hp)	1
Main Motor Phase	3
Main Motor (RPM)	1,725
Main Motor Voltage (v)	230/460
Operating Weight (kg)	1,360.78
Overall Dimensions Depth (mm)	1,955.8
Overall Dimensions Height (mm)	1,905
Overall Dimensions Length (mm)	1,499.6
Overall Dimensions Width (mm)	1,852.6
Power Source	pneumatic
Spindle Speed (RPM)	1,725
Station Count	4
Table Motor (hp)	0.5
Table Motor (RPM)	1,725
Table Motor Voltage (v)	230/460
Vertical Stations	3
Workpiece Diameter Range Max (mm)	508
Workpiece Diameter Range (mm)	12.7
Workpiece Material	brass, aluminum