Coil Processing·Stretch Bend Leveling Line

41.33" X 0.019" UNGERER MDL. STR200-1050 STRETCH BEND LEVELING LINE

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: UNGERER
Model: STR200-1050
Condition: Used

Description

41.33" X 0.019" UNGERER MDL. STR200-1050 STRETCH BEND LEVELING LINE MATERIAL: STAINLESS STEEL, NICKEL ALLOYS, AND COPPER ALLOYS TENSILE STRENGTH: 550-800 N/mm2 0.2% PROOS STRESS: 400-700 N/mm2 ELONGATION: 2.5-28% WIDTH: 450-1050 mm THICKNESS: 0.08-0.5 (0.8) mm RATIO OF CROSS SECTION: 1:15 CROSS SECTION: 36-525 mm2 DECOILER COIL WEIGHT: MAX. 10,000KG. COIL ID: 400 mm / 500 mm WITH JAW ADAPTERS COIL OD: 1,750 mm DECOILING: FROM TOP RECOILER COIL WEIGHT: MAX. 10,000KG. COIL ID: 508 mm COIL OD: 1,750 mm DECOILING: FROM TOP PAPER COIL ID: 76mm OD 600mm BRIDLE ROLLS DIAMETER: 500 mm WIDTH: 1100 mm BEND-LEVELLING UNIT MODEL: STR 200-1050/0.5(0.8)/23 LEVELLING ROLLS: 23 PCS. DIAMETER: 16 mm LENGTH: APPROX. 1250 mm INTERMEDIATE ROLLS: 25 PCS. DIAMETER: 30 mm BACK-UPS: 9 ON TOP / 9 ON BOTTOM BACK-UP ROLLS: 243 PCS. DIAMETER: 33mm ELONGATION CONTROL: 0-3% LINE SPEED: 200 m/min STRIP DIRECTION: FROM LEFT TO RIGHT, SIDE SEEN FROM OPERATOR DESK CONNECTED LOAD: APPROX. 140 KVA AT 0.5 mm STRIP THICKNESS SUPPLY VOLTAGE: 3 X 400 V./ 3 PHASE / +5% UPTO -7%/ 60 HZ AT +/-2% CONTROL VOLTAGE 24 V DC, 230 V AC PLC INPUTS/OUTPUTS: 24 V DC/ 24 V DC MAIN DRIVES: DC MOTORS AUXILIARIES DRIVES: AC MOTORS MAGNET VALVES: 24 V DC 24 V GS: 24 V DC HYDRAULIC PRESSURE: 120 BAR GENERALLY / 250 BAR BACK-UPS ON BEND LEVELLING UNIT

Specifications

Backup Rolls Bottom	9
Backup Rolls Count	243
Backup Rolls Diameter (mm)	33
Backup Rolls Top	9
Bridle Rolls Diameter (mm)	500
Bridle Rolls Width (mm)	1,100
Connected Load (kVA)	140
Control Voltage V Ac	230
Control Voltage V Dc	24
Cross Section Mm2 Max	525
Cross Section Mm2 (min)	36
Cross Section Ratio	1:15
Decoiler Coil Id (mm)	500
Decoiler Coil Od (mm)	1,750
Decoiler Max Coil Weight (kg)	10,000
Elongation Control Percent Max	3
Elongation Percent Max	28
Elongation Percent (min)	2.5
Hydraulic Pressure Bar Backup	250
Hydraulic Pressure Bar General	120
Intermediate Rolls Count	25
Intermediate Rolls Diameter (mm)	30
Levelling Rolls Count	23
Levelling Rolls Diameter (mm)	16
Levelling Rolls Length (mm)	1,250
Line Speed (m/min)	200
Material Types	stainless steel, nickel alloys, copper alloys
Recoiler Coil Id (mm)	508
Recoiler Coil Od (mm)	1,750
Recoiler Max Coil Weight (kg)	10,000
Supply Frequency (Hz)	60
Supply Phase	3 phase
Supply Voltage (v)	400
Tensile Strength N Mm2 Max	800
Tensile Strength N Mm2 (min)	550
Thickness (mm)	0.5
Width (mm)	1,050
Yield Stress 0 2 Percent N Mm2 Max	700
Yield Stress 0 2 Percent N Mm2 (min)	400