7/8" TORRINGTON MODEL #6 2 DIE SWAGER
- Manufacturer
- Torrington
- Model
- 6 Modified
- Condition
- Used
Description
7/8" TORRINGTON MODEL #6 2 DIE SWAGER MANUFACTURER: TORRINGTON MODEL: 6 MODIFIED- THE DIE DIMENSIONS FOR THIS MACHINE DO NOT MATCH THOSE OF A MODEL #6 ALTHOUGH OTHER INDICATORS SHOW THE MACHINE TO BE A MODEL #6. CAPACITY LISTED BELOW IS BASED ON THE EXISTING DIE SIZE AND NOT ON CATALOG DIMESNIONS FOR A MODEL #6. CAPACITY: 1 1/4" (31.8mm) LONGEST TAPER POSSIBLE: 6" (152.4mm) DIE SIZE: -WIDTH: 1 7/8" (47.6mm) -HEIGHT: 1 1/4" (31.8mm) -LENGTH: 6" (152.4mm) MOTOR: 7 1/2 HP (5.6Kw) 1745 RPM AC MOTOR 208/230/460 VOLT 3 PHASE 60 HERTZ NOTE: MACHINE IS EQUIPPED WITH A TRIM SAW FLOOR SPACE: 45" L-R X 45" F-B X 53" HIGH
Specifications
| Capacity (mm) | 31.8 |
|---|---|
| Die Height (mm) | 31.8 |
| Die Length (mm) | 152.4 |
| Die Width (mm) | 47.6 |
| Floor Space Height (mm) | 1,346.2 |
| Floor Space Length (mm) | 1,143 |
| Floor Space Width (mm) | 1,143 |
| Longest Taper Possible (mm) | 152.4 |
| Motor Frequency (Hz) | 60 |
| Motor Phase | 3 phase |
| Motor Power (kW) | 5.6 |
| Motor (RPM) | 1,745 |
| Motor Voltage (v) | 208/230/460 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Wire Spring
2" ABBEY ETNA NO. 206 Swager, 6" Die Length, Front & Rear Thru Feed Type Feeder
Abbey Etna · 206
Bass Machinery
2-1/4" FENN 4-1/2F Swager, 2-Die 15" L Die Pocket, 10 HP
FENN · 4-1/2F
Bass Machinery
1 3/4" FENN MODEL 3-1/2F SWAGER,
Fenn · 3-1/2F
Bass Machinery
2-1/4" FENN 4F2 Swager, Near New Condition, 3-1/8" x 3-1/2" x 2-1/4"H Die, 10 HP
FENN · 4F2 · 2018
Bass Machinery
PEDRAZZOLI #J25, 2 DIE SWAGER
IBP PEDRAZZOLI · J25
National Machinery Exchange
1-3/4" STANDARD 3A SWAGER
Standard Machinery · 3A
National Machinery Exchange
