Forming·Tube Bender
1 1/8" PINES MODEL #MC-1400 HORIZONTAL TUBE BENDER
Sold by National Machinery Exchange·Available·Last verified 3h ago
- Manufacturer
- Pines
- Model
- MC-1400
- Condition
- Used
Description
1 1/8" PINES MODEL #MC-1400 HORIZONTAL TUBE BENDER SPECIFICATIONS: MANDREL LENGTH: 72" RADIUS OF BEND: 8" MAX EQUIPPED WITH: - COUNTER CLOCKWISE BENDING - MANUAL CLAMPING - HYDRAULIC OPERATION - DEGREE OF BEND - HAND LEVER CONTROL - SELF CONT. HYDRAULICS MOTOR DRIVE: 3PH, 220/460V, 3PH, 60/50CYC, 1170/975 RPM WITH MOTOR STARTER OVERALL SIZE: 88"L x 35"W x 50"H
Specifications
| Bending Direction | counter_clockwise |
|---|---|
| Clamping Type | manual |
| Control Type | hand_lever |
| Mandrel Length Inches | 72 |
| Mandrel Length (mm) | 1,828.8 |
| Motor Frequency (Hz) | 60/50 |
| Motor Phases | 3 |
| Motor (RPM) | 1170/975 |
| Motor Voltage (v) | 220/460 |
| Operation Type | hydraulic |
| Overall Height Inches | 50 |
| Overall Height (mm) | 1,270 |
| Overall Length Inches | 88 |
| Overall Length (mm) | 2,235.2 |
| Overall Width Inches | 35 |
| Overall Width (mm) | 889 |
| Radius Of Bend Max Inches | 8 |
| Radius Of Bend Max (mm) | 203.2 |
| Tube Diameter Inches | 1.125 |
| Tube Diameter (mm) | 28.575 |
Request a quote from National Machinery Exchange
Tell National Machinery Exchange what you need. They'll reply directly to you.
More in Forming
6" PINES 4,6" OD X .250"WALL,15 HP,MANDREL EXTRACTOR, PRESSURE DIE ASSIST, 1969
Pines · 6" · 1969
Spirit Machinery
3 1/2" PINES NO 2,CLOCKWISE,HYD MANDREL EXT,DIAL A BEND
Pines · No 2
Spirit Machinery
PINES No. 1,10" MAX RADIUS,180 DEGREE, MANDREL EXTRACT, 10 POS DEG SELECT, 1974
Pines · No. 1 · 1974
Spirit Machinery
6", PINES A6 MODEL 4, 48" MANDREL EXTRACTOR, 1957
Pines · A6 Model 4 · 1957
Spirit Machinery
2" TUBE SHARK II ELECTRIC/HYDRAULIC TUBE BENDER, 180 DEGREES, 2011
Shark · Tube Shark II · 2011
Spirit Machinery
SCHWARZE-ROBITEC MODEL CNC 60 ROTARY TUBE BENDER, 2001,
Schwarze-Robitec · CNC 60 · 2001
Bass Machinery
