Machine Tools·Horizontal Lathe

OKUMA SIMULTURN-LU300MY/2SC-1000,V12/V8,10"CHK,LNS-QSIX-S2,OSP200LA,NEW-2012

Sold by Machine Tool Repair·Available·Last verified 3h ago

Manufacturer: Okuma
Model: LU300MY-1000
Year: 2012
Condition: Used

Description

OKUMA SIMULTURN-LU300MY/2SC-1000,V12/V8,10"CHK,LNS-QSIX-S2,OSP200LA,NEW-2012 Specifications: Swing Over Bed .............................. 20.87" Swing Over Saddle ........................... 16.14" Distance Between Centers .................... 39.37" Max Turning Diameter ........................ 13.39" Max Working Length .......................... 39.37 Axis Travel: XA............................................10.24" ZA............................................40.00" XB............................................ 5.51" ZB............................................38.00" C Axis ...................................... 360 Degree Spindle Speeds .............................. 38 ~ 3,800 RPM Speed Ranges .................... Infinitely Variable X Auto Range Nose ................................. Option A2-8 Big Bore Bore Diameter ............................... 3.14" Turret Upper Multitasking ................... V-12 NC Turret Lower ....................................... V8 (VDI) Indexing Time Non-Lift ...................... 0.18 Sec Live Tool Speeds ............................ 45 ~ 4,500 RPM Feedrates X/Z/C ............................. 787/984/200 Tailstock Quill Diameter .................... 3.54" Quill Bore Taper ............................ MT#5 Quill Travel ................................ 4.72" Main Drive Motor ............... 30-HP 304 Ft-LB Torque Live Tool Motor ............................. 9.5 HP Machine Weight .............................. 19,360 LBS Equipped With: * Okuma OSP-200LA With Machining Navi L-G * Spare M-Codes, 4-Sets Pitch Error Compensation * Feed Hold During Threading Thread Start Point Offset *Helical Cutting * Spindle Synchronized Tapping Variable Spindle Speed Thread * Auto Tow-along Tailstock * LNS/AutoBlock Model SLU-Z-2 .32" To 3.98" Lower Turret Mount, Allows For Turret Index * Hydraulic Valve Package * Manual Touchsetter * Chuck High/Low Pressure * Losma Mist Collector *Live Tool Package (2) Side Face Mill/Drill, (2) End Face Mill/Drill * 10" Kitagawa 3-Jaw 40MM Bore * Enomoto Chip Coveyor & Coolant Tank * Multi-Tap Transformer * LNS Quick Six Move S2 Barfeed System & Liners 3/8" To 3-1/8" x 74.8" Max Length, Lower Horizontal Rack *** Inspect Under Power With Less Than 100 Hours *** ** Ready To Ship

Specifications

Barfeed Max Diameter (mm)	101.1
Barfeed Max Length (mm)	1,899.9
Barfeed Min Diameter (mm)	9.5
Bore Diameter (mm)	79.8
C Axis Degrees	360
Chuck Bore (mm)	40
Chuck Size (mm)	254
Control System	osp200la
Distance Between Centers (mm)	999.9
Feedrate C Deg Per (min)	200
Feedrate X Mm Per (min)	787
Feedrate Z Mm Per (min)	984
Indexing Time Sec	0.18
Live Tool Motor (hp)	9.5
Live Tool Motor (kW)	7.084
Live Tool Speed Max (RPM)	4,500
Live Tool Speed Min (RPM)	45
Lower Turret	v8_vdi
Machine Weight (kg)	8,783
Main Drive Motor (hp)	30
Main Drive Motor (kW)	22.371
Main Drive Torque Ft (lb)	304
Max Turning Diameter (mm)	340
Max Working Length (mm)	999.9
Operating Hours	100
Quill Taper	mt5
Quill Travel (mm)	119.9
Spindle Speed Max (RPM)	3,800
Spindle Speed Min (RPM)	38
Spindle Speed Range	infinitely_variable
Swing Over Bed (mm)	530.1
Swing Over Saddle (mm)	410
Tailstock Quill Diameter (mm)	89.9
Upper Turret	v12_nc
Xa Axis Travel (mm)	260.1
Xb Axis Travel (mm)	139.9
Za Axis Travel (mm)	1,016
Zb Axis Travel (mm)	965.2