Machine Tools·Wire Edm

MITSUBISHI FA-10S ADVANCE WIRE EDM,13.8"X,9.8"Y,8.6"Z,M700 MITSU 64 BIT,NEW-2011

Sold by Machine Tool Repair·Available·Last verified 3h ago

Manufacturer: Mitsubishi
Model: FA-10S
Year: 2011
Condition: Used

Description

MITSUBISHI FA-10S ADVANCE WIRE EDM,13.8"X,9.8"Y,8.6"Z,M700 MITSU 64 BIT,NEW-2011 MAX. SUBMERGED WORKPIECE DIMENSIONS..... 31.5" x 23.6" x 8.5" MAX. SUBMERGED WORKPIECE WEIGHT......... 1,105 lbs TABLE DIMENSIONS........................ 23.2" X 20.2" MACHINING RANGE X-Y..................... 13.8" X 9.8" MAXIMUM Z AXIS HEIGHT................... 8.6" U-V AXIS TRAVEL (FROM CENTER)........... PLUS, MINUS 1.25 TAPER ANGLE AT THICKNESS................ 15 DEG AT 4" TAPER CAPACITY.......................... +- 30 DEG MINIMUM DRIVE UNIT / RESOLUTION......... 0.00001 / 2 MIL USER PROGRAM STORAGE (HARD DISK SIZE)... 1G (40G) TABLE RAPID FEED SPEED.................. 51.2 IPM MIN START HOLE DIAMETER FOR AUTOTHREAD.. 0.02 WIRE DIAMETER RANGE POSSIBLE............ 0.004" TO 0.012" MAX WIRE SPOOL SIZE..................... 22 LBS FILTER TANK CAPACITY.................... 116 GAL MACHINE SYSTEM DIMENSIONS... 77.7" X 81.6" X 80" TALL MACHINE WEIGHT.............. 5,690 LBS EQUIPPED WITH: * M700 Series Control with 15" Touch Screen * Mitsubishi 64 Bit PC Based CNC Control * Submerged Machining Capability * Automatic Wire Threader (AT) with Scrap Wire Processor (Chopper) * Automatic Fluid Level Control * Auto-Lock Vertical Tank Door Mechanism * Full 4-Sided Work Table * Power Master Control (Automatically Adjusts Power Settings) * Fine-grain Dianite Casting Material * Moving Column Design * DC-Servo (Closed Loop) Torque Control Wire Tensioning * Electric Chiller * Filtration System System: * Direct Drive 32mm Ball Screws * Linear Motion Guide Ways * New Digital 500 Watt AC Servo Drive System * All-Axes Absolute Control System * Linear Glass Scales (X-Y Axes) * Fine Resolution Encoder Feedback (U-V-Z-Axes) * 16 Step Programmable Flushing Control * All Available Manuals and Accessories

Specifications

Control System	M700 Series
Control Type	64 bit PC based CNC
Filter Tank Capacity Liters	439.294
Machine Height (mm)	2,032
Machine Length (mm)	1,973.58
Machine Weight (kg)	2,580.146
Machine Width (mm)	2,072.64
Machining Range X (mm)	350.52
Machining Range Y (mm)	248.92
Max Submerged Workpiece Height (mm)	215.9
Max Submerged Workpiece Length (mm)	800.1
Max Submerged Workpiece Weight (kg)	501.548
Max Submerged Workpiece Width (mm)	599.44
Max Wire Spool Weight (kg)	9.979
Maximum Z Axis Height (mm)	218.44
Minimum Resolution (mm)	0.051
Minimum Start Hole Diameter (mm)	0.508
Servo Drive Watts	500
Table Length (mm)	589.28
Table Rapid Feed Speed (mm/min)	1,300.48
Table Width (mm)	512.58
Taper Angle Degrees	15
Taper Capacity Degrees	30
Touch Screen Size Inches	15
U V Axis Travel (mm)	31.75
User Program Storage Gb	40
Wire Diameter Range (mm)	0.102 to 0.305