Machine Tools·Cnc Lathe

HARDINGE CHNC1, SIEMENS 840T, 1 5/8"Chk, 1988,

Sold by Machine Tool Repair·Available·Last verified 3h ago

Manufacturer: Hardinge
Model: CHNC1
Year: 1988
Condition: Used

Description

HARDINGE CHNC1, SIEMENS 840T, 1 5/8"Chk, 1988, SPINDLE: Spindle Configuration ANSI A2-5" Hole Through Spindle 1-7/8 16C Collet Capacity 1-5/8 Spindle Speed 5,000 rpm CAPACITY: Max swing over bad 14" Max threading Diameter 8" Max turning Diameter 8" TURRET: Number of Stations 8 Square tool size 1/2" Round tool Diameter(standard) up to 3/4" Max X-axis travel 4-1/2" Max Z-axis travel 12" Max X & Z axis feedrate 200 ipm Max Distance from turret face to Spindle 12-1/2" EQUIPPED WITH: 810T SIEMENS General Numeric CNC control .00010" Minimum programmable resolution 8-Station interchangeable turret top plate 4-Station interchangeable turret top plate Pneumatically actuated collet closer for type 16C collets Vertical cut-off slide and parts chute #HF-6A-16C HARDINGE bar feed Self-draining tool tray 7.5 H.P. AC spindle drive motor Machine is wired for 230 volt operation. Approximate Weight: 5,000 LBS Approximate Dimensions: 93" L-R x 62" F-B x 65" H

Specifications

Cnc Control	Siemens 810T
Collet Capacity 16c (mm)	41.275
Height (mm)	1,651
Length (mm)	2,361.2
Max Distance Turret To Spindle (mm)	317.5
Max Swing Over Bed (mm)	355.6
Max Threading Diameter (mm)	203.2
Max Turning Diameter (mm)	203.2
Max X Axis Travel (mm)	114.3
Max X Z Axis Feedrate Mm Per (min)	5,080
Max Z Axis Travel (mm)	304.8
Minimum Programmable Resolution (mm)	0.003
Operating Weight (kg)	2,267.96
Round Tool Diameter (mm)	19.05
Spindle Configuration	ANSI A2-5"
Spindle Drive Motor (hp)	7.5
Spindle Drive Motor (kW)	5.593
Spindle Hole Through (mm)	47.625
Spindle Speed (RPM)	5,000
Square Tool Size (mm)	12.7
Turret Stations	8
Voltage (v)	230
Width (mm)	1,574.8