Machine Tools·Radial Arm Drill Press

5' x 15 3/8", KAO MING, 1986 Radial Arm Drill Press

Sold by Machine Tool Repair·Available·Last verified 4h ago

Manufacturer: Kao Ming
Year: 1986
Condition: Used

Description

5' x 15 3/8", KAO MING, 1986 Radial Arm Drill Press Drilling capacity: steel 2 1/4" cast iron 2-5/8" Tapping capacity: steel 2" cast iron 2-3/8" Boring capacity: steel 5" cast iron 7-3/8" Column diameter 15-3/8" Minimum/Maximum distance, face of column to 14-9/16" ~ 63" centerline of spindle 22-1/4" ~ 70" Minimum/Maximum distance, column center to 17-1/8" ~ 61" Height of base 9-1/16" Height of column 117-3/4" Maximum height from spindle head to floor 131" Vertical travel of spindle in head 11-3/4" Taper in spindle #5 Morse Spindle diameter 3-1/8" Quill diameter 4-1/8" Vertical traverse of arm on column 32-7/8" Horizontal traverse of head on arm 48-7/16" (12) Spindle speeds 30 ~ 1,580 RPM (12) Feeds .0025 ~ .045 IPR Maximum height over column cap 117" Equipped with:36" Wide x 19-7/8" Deep x 19-3/4" High t-slotted box table Hydraulically actuated pre-selection of next spindle speed while spindle is running Hydraulically actuated clamping of arm on column and head on arm Motorized raising/lowering of arm on column Automatic tool ejector Self-contained coolant system with 1/8 H.P. pump motor 1 H.P. hydraulic pump motor 2 H.P. arm elevation motor 7.5 H.P. 3/60/220-440 volt spindle drive motor and electrical controls Machine is wired for 220 volt operation. Approximate Weight: 8,000 Lbs. Approximate Shipping Dimensions: 94" L-R x 38" F-B x 122" H Condition: Very Good (F.O.B. Truck, Hauppauge - Long Island, NY)

Specifications

Arm Elevation Motor (hp)	2
Arm Length (mm)	1,524
Base Height (mm)	230.124
Boring Capacity Cast Iron (mm)	187.325
Boring Capacity Steel (mm)	127
Column Diameter (mm)	390.525
Column Height (mm)	2,989.1
Condition	Very Good
Coolant Pump (hp)	0.125
Drilling Capacity Cast Iron (mm)	66.675
Drilling Capacity Steel (mm)	57.15
Feed Max Mm Per Rev	1.143
Feed Min Mm Per Rev	0.064
Horizontal Traverse Head (mm)	1,229.484
Hydraulic Pump (hp)	1
Max Column Center To Spindle (mm)	1,548.4
Max Face To Spindle Centerline (mm)	1,600.2
Max Height Over Column Cap (mm)	2,971.8
Max Height Spindle To Floor (mm)	3,326.6
Min Column Center To Spindle (mm)	434.625
Min Face To Spindle Centerline (mm)	369.824
Operating Weight (kg)	3,628.74
Quill Diameter (mm)	104.775
Shipping Depth (mm)	965.2
Shipping Height (mm)	3,096.8
Shipping Length (mm)	2,387.6
Spindle Diameter (mm)	79.375
Spindle Drive Motor Frequency (Hz)	60
Spindle Drive Motor (hp)	7.5
Spindle Drive Motor Phase	3
Spindle Drive Motor Voltage (v)	220/440
Spindle Speed Max (RPM)	1,580
Spindle Speed Min (RPM)	30
Spindle Taper	#5 Morse
Table Depth (mm)	504.825
Table Height (mm)	501.65
Table Width (mm)	914.4
Tapping Capacity Cast Iron (mm)	60.325
Tapping Capacity Steel (mm)	50.8
Vertical Travel Spindle (mm)	298.45
Vertical Traverse Arm (mm)	834.975