53.15"X, 39.37"Y, 39.37"Z, DAHLIH MCH - 800, 2016,
- Manufacturer
- DAHLIH
- Model
- MCH-800
- Year
- 2016
- Condition
- New
Description
53.15"X, 39.37"Y, 39.37"Z, DAHLIH MCH - 800, 2016, TABLE: PALLET DIMANSIONS 31.5" X 31.5" MINIMUM INDEXING ANGLE 1 DEGREE MAXIMUM TABLE LOAD 4,400 LBS TRAVEL: LONGITUDINAL TRAVEL (X) 53.15" VERTICAL TRAVEL (Y) 39.37" CROSS TRAVEL (Z) 39.37" DISTANCE OF SPINDLE END TO TABLE CENTER 11.81" - 51.18" DISTANCE OF SPINDLE CENTER TO TABLE SURFACE 1.97" - 41.34" SPINDLE: SPINDLE NOSE N.T. 50 OR N.T. 40 SPINDLE SPEED 6,000 RPM OR 40 TAPER 12,000 RPM SPINDLE SPEED RANGE GEAR HEAD TWO STAGES LOW/ HIGH SHIFTTER FEED: CUTTING FEED 393 IPM RAPID TRAVERSE 620 IPM MINIMUM INPUT INCREMENT 0.0001" ATC (AUTOMATIC TOOL CHANGER): TOOL HOLDER CT 50 OR BY CHOICE CT 40 TOOL STORAGE CAPACITY 60 TOOLS MAXIMUM TOOL DIAMETER X LENGTH 4.33" X 19.69" MAXIMUM TOOL WEIGHT 44 LBS TOOL SELECTION BI - DIRECTIONAL MOTORS: SPINDLE MOTOR CONTINUOUS RATING 30 HP DRIVE MOTORS X,Y,AND Z AXIS 5.6, 5.6 AND 5.6 HP MACHINE WEIGHT AND SPACE: FLOOR SPACE 173.62" X 255.71" NET WEIGHT 52,800 LBS STANDARD ACCESSORIES: HEAT EXCHANGER SPINDLE COOLING DEVICE X,Y,Z AXES LINEAR SCALES SPIRAL TYPE CHIP CONVEYOR FLAT TYPE CHIP CONVEYOR WITH CHIP WAGON COOLANT THROUGH THE SPINDLE FLOOD COOLANT DEVICE SPECIAL ACCESSORIES: ATC TOOL STORAGE 90 / 120 TOOLS AUTOMATIC CENTERING DEVICE FULL 4TH TABLE TOOL BREAKAGE DETECTION DEVICE TOOL LENGTH MEASURING DEVICE TOOL PRESEATER
Specifications
| Cutting Feed Mm Per (min) | 9,982.2 |
|---|---|
| Distance Spindle Center To Table Surface (mm) | 50 - 1050 |
| Distance Spindle End To Table Center (mm) | 300 - 1300 |
| Drive Motor X Power (kW) | 4.176 |
| Drive Motor Y Power (kW) | 4.176 |
| Drive Motor Z Power (kW) | 4.176 |
| Floor Space (mm) | 4410 x 6495 |
| Maximum Table Load (kg) | 1,995.806 |
| Maximum Tool Diameter (mm) | 110 |
| Maximum Tool Length (mm) | 500 |
| Maximum Tool Weight (kg) | 19.958 |
| Minimum Indexing Angle Degrees | 1 |
| Minimum Input Increment (mm) | 0.003 |
| Net Weight (kg) | 23,949.024 |
| Pallet Dimensions (mm) | 800 x 800 |
| Rapid Traverse Mm Per (min) | 15,748.8 |
| Spindle Motor Power (kW) | 22.371 |
| Spindle Nose Type | NT50 or NT40 |
| Spindle Speed Rpm High | 12,000 |
| Spindle Speed Rpm Low | 6,000 |
| Tool Holder Type | CT50 or CT40 |
| Tool Storage Capacity | 60 |
| Travel X (mm) | 1,349.91 |
| Travel Y (mm) | 999.618 |
| Travel Z (mm) | 999.618 |
Request a quote from Machine Tool Repair
Tell Machine Tool Repair what you need. They'll reply directly to you.
More in Machine Tools
82.68"X, 34.25"Y, 29.92"Z, DAHLIH MCV - 2100, 2014,
DAHLIH · MCV-2100 · 2014
Machine Tool Repair
165.35"X, 98.42"Y, 31.5"Z, DAHLIH, No. DCM - 4225, 2014,
DAHLIH · DCM-4225 · 2014
Machine Tool Repair
28.35"X, 18.11"Y, 20.8"Z, DAHLIH MCV-720, 2016,
DAHLIH · MCV-720 · 2016
Machine Tool Repair
78.7"X, 39.4"Y, 39.4"Z, DAHLIH HC-2000, 2016,
DAHLIH · HC-2000 · 2016
Machine Tool Repair
34.64"X, 22.04"Y, 22.04"Z, DAHLIH DMV - 800, 2016
DAHLIH · DMV-800 · 2016
Machine Tool Repair
HURCO BMC-2416/DSM X-24",Y-16",Z-20",8,000RPM ,FULL 4TH AXIS
Hurco · BMC-2416/DSM · 1999
Machine Tool Repair
