Machine Tools·Vertical Machining Center

125.98"X, 51.18"Y, 29.92"Z, DAHLIH, No. DCM - 3213, 2014,

Sold by Machine Tool Repair·Available·Last verified 4h ago

Manufacturer: DAHLIH
Model: DCM-3213
Year: 2014
Condition: New

Description

125.98"X, 51.18"Y, 29.92"Z, DAHLIH, No. DCM - 3213, 2014, TABLE: Working Surface 137.79" x 53.14" T - Slot (Size x Number x Distance) 0.87" x 9 x 5.90" Maximum Table Load 11,000 lbs Distance Between Table Top and Ground 35.62" TRAVEL: Longitudinal Travel (X) 125.98" Cross Travel (Y) 51.18" Headstock Travel (Z) 29.92" Distance Between Spindle Nose And Table Top 7.87" ~ 37.79" Distance Between Columns 55.11" FEED: Cutting Feed (X , Y , And Z Axes) 393.7, 590, 590 IPM Rapid Traverse 650 IPM Minimum Input Increment 0.0001" SPINDLE: Spindle Nose NT 50 Spindle Speed 6,000 RPM Cooling / Lubrication Oil Chiller Unit / Grease ATC (Automatic Tool Changer): Tool Storage Capacity 32 (40 / 60) Tools Tool Holder CT - 50 Maximum Tool Weight 39.6 lbs Maximum Tool Diameter 4.92" Tool Selection Bi - Direction MOTORS: Spindle Motor Rated for 30 Minutes Continuous 30 Hp Drive Motors (X, Y, And Z Axes) 6, 4.2 and 4.2 Hp WEIGHT AND SPACE: Floor Space 166.73" x 433.07" Net Weight 59,400 lbs CNC CONTROLLER: FANUC Model 0i CNC Control (18i or 21iMB) STANDARD ACCESSORIES: Heat Exchanger Spindle Cooling Device Coolant Through The Spindle Spiral Type Chip Conveyor Flat Type Chip Conveyor With Chip Wagon Fully Enclosed Coolant And Air Gun SPECIAL ACCESSORIES: CT - 50 10,000 RPM Direct Drive Spindle Oil Mist Device Oil Skimmer 90 Degree Angular X, Y, Z Axes Linear Scales Automatic Centering Device Tool Breakage Detection Device Tool Length Measuring Device Tool Presetter Tool Storage Capacity 60 Tools Air Conditioner

Specifications

Cnc Controller	FANUC 0i
Cooling Lubrication	oil_chiller_grease
Cutting Feed X Mm Per (min)	9,999.82
Cutting Feed Y Mm Per (min)	14,986
Cutting Feed Z Mm Per (min)	14,986
Distance Between Columns (mm)	1,399.794
Distance Table To Ground (mm)	904.748
Drive Motor X Power (kW)	4.474
Drive Motor Y Power (kW)	3.132
Drive Motor Z Power (kW)	3.132
Floor Space Length (mm)	4,235.342
Floor Space Width (mm)	10,999.678
Maximum Table Load (kg)	4,989.515
Maximum Tool Diameter (mm)	124.968
Maximum Tool Weight (kg)	17.964
Minimum Input Increment (mm)	0.003
Net Weight (kg)	26,944.415
Rapid Traverse Mm Per (min)	16,510
Spindle Motor Continuous Rating (min)	30
Spindle Motor Power (kW)	22.371
Spindle Nose To Table Max (mm)	959.426
Spindle Nose To Table Min (mm)	199.898
Spindle Nose Type	NT 50
Spindle Speed (RPM)	6,000
T Slot Count	9
T Slot Spacing (mm)	149.86
T Slot Width (mm)	22.098
Tool Holder Type	CT-50
Tool Selection	bi_direction
Tool Storage Capacity	32
Travel X (mm)	3,199.692
Travel Y (mm)	1,299.972
Travel Z (mm)	759.888
Working Surface Length (mm)	3,499.866
Working Surface Width (mm)	1,349.756