Machine Tools·Vertical Machining Center

86.6"X, 51.18"Y, 29.92"Z, DAHLIH, No. DCM - 2213, 2014,

Sold by Machine Tool Repair·Available·Last verified 4h ago

Manufacturer: DAHLIH
Model: DCM-2213
Year: 2014
Condition: New

Description

86.6"X, 51.18"Y, 29.92"Z, DAHLIH, No. DCM - 2213, 2014, TABLE: Working Surface 98.42" x 53.14" T - Slots (Size x Number x Distance) 0.87" x 9 x 5.90" Maximum Table Load 8,800 lbs Distance Between Table Top And Ground 35.62" TRAVEL: Longitudinal Travel(X) 86.60" Cross Travel (Y) 51.18" Headstock Travel (Z) 29.92" Distance Between Spindle Nose And Table Top 7.87" ~ 37.79" Distance Between Columns 55.11" FEED: Cutting Feed 472, 490, 490 IPM Rapid Traverse 600 IPM Minimum Input Increment 0.0001" SPINDLE: Spindle Taper No.50 Spindle Speed 6,000 RPM Cooling / Lubrication Oil Cooling / Grease ATC (Automatic Tool Changer): Tool Storage Capacity 32 (40 / 60) Tools Tool Holder CT 50 Maximum Tool Weight 39.6 lbs Maximum Tool Length 15.74" Maximum Tool Diameter 4.92" Tool Selection Bi - Direction MOTORS: Spindle Motor 30 Minutes Rated Continuous 30 Hp Drive Motors (X , Y , Z - Axes) 6, 4.2, 4.2 - Hp WEIGHT AND SPACE: Floor Space 166.73" x 334.64" Net Weight 50,600 lbs CNC CONTROLLER: Equipped With FANUC Model 0I- MC STANDARD ACCESSORIES: Heat Exchanger Spindle Cooling Device Screw Type Chip Conveyor and Chip Wagon Flat Type Chip Conveyor Coolant Through The Spindle Fully Enclosed OPTIONAL ACCESSORIES: CT 50 10,000 RPM Direct Drive Spindle Oil Mist Device Oil Skimmer 90 Degrees Angular X , Y , And Z Axes Linear Scales Automatic Centering Device Tool Breakage Detection Device Tool Length Measuring Device Tool Presetter ATC Tool Storage 60 Tools Air Conditioner

Specifications

Cnc Controller	FANUC 0I-MC
Cooling Lubrication	Oil Cooling / Grease
Cutting Feed Ipm	490
Distance Between Columns (mm)	1,399.794
Distance Table To Ground (mm)	904.748
Drive Motor X (hp)	6
Drive Motor X (kW)	4.474
Drive Motor Y (hp)	4.2
Drive Motor Y (kW)	3.132
Drive Motor Z (hp)	4.2
Drive Motor Z (kW)	3.132
Floor Space Length (mm)	4,234.342
Floor Space Width (mm)	8,499.696
Maximum Tool Diameter (mm)	124.968
Maximum Tool Length (mm)	399.416
Maximum Tool Weight (kg)	17.964
Minimum Input Increment (mm)	0.003
Net Weight (kg)	22,953.48
Rapid Traverse Ipm	600
Spindle Motor (hp)	30
Spindle Motor (kW)	22.371
Spindle Nose To Table Max (mm)	959.66
Spindle Nose To Table Min (mm)	199.898
Spindle Speed (RPM)	6,000
Spindle Taper	No.50
Table Load Capacity (kg)	3,992.04
Tool Holder Type	CT 50
Tool Selection	Bi-Direction
Tool Storage Capacity	32
Travel X (mm)	2,199.64
Travel Y (mm)	1,299.972
Travel Z (mm)	759.568
Working Surface Length (mm)	2,497.868
Working Surface Width (mm)	1,349.756