Forming·Stretch Wrap Forming Press

NAS PLANT DIVISION STRETCH WRAP FORMING PRESS

Sold by National Machinery Exchange·Available·Last verified 3h ago

Manufacturer: NAS Plant Division
Condition: Used

Description

NAS PLANT DIVISION STRETCH WRAP FORMING PRESS SPECIFICATIONS FORMING TONNAGE 11 DISTANCE BETWEEN JAWS: Maximum Length of Part with Tension Cylinders fully retracted136" (3,454.4 mm) Minimum Length of Part with Tension Cylinders fully extended 10" (254 mm) TENSION CYLINDER STROKE each Max.10? (254 mm) Currently has 3" long spacer to reduce stoke to 7" (177.6 mm) TENSION CYLINDER ROTATION +/- 25 Degrees ARMS: SWING Simultaneous Arm Motion Arm swings 10 Forward to 90Back. WRAPPING SPEED RANGE Adjustable DIE TABLE: Working Surface, W x D 36" x 35" (908.88 x 908.05 mm) (75-pre drilled & threaded) 5/8" (15.875 mm) Height Table To Floor 39" (974.725 mm) MOTOR DRIVE: Wired 440 volts, 3 Phase Hydraulic Pump10 hp. 220/440 volts CONTROLS: Hand Push Buttons, with Start and Stop Buttons EQUIPPED WITH: 1- set 3" (76.2mm) Jaws with Pneumatic Clamping. 17- Miscellaneous sets of Gripper Jaws 7- single Gripper Jaws COMPLETE FACTORY SAFETY GUARDS Dimensions 91" (2311.4mm) w x 135"(3429mm) FB 47-1/2" (1206.5mm) Ht (Opened Width183" (4648.2mm) Approx. Wt. 7000 lbs.

Specifications

Arm Swing Back Degrees	90
Arm Swing Forward Degrees	10
Clamping Type	pneumatic
Control Type	hand_push_buttons
Current Stroke (mm)	177.6
Die Table Depth (mm)	908.05
Die Table Height (mm)	974.725
Die Table Width (mm)	908.88
Forming Tonnage	11
Hydraulic Pump Power (kW)	7.457
Machine Depth (mm)	3,429
Machine Height (mm)	1,206.5
Machine Width (mm)	2,311.4
Max Part Length (mm)	3,454.4
Min Part Length (mm)	254
Motor Phase	3_phase
Motor Voltage (v)	440
Opened Width (mm)	4,648.2
Operating Weight (kg)	3,175.147
Tension Cylinder Rotation Degrees	25
Tension Cylinder Stroke (mm)	254