15", POWERMATIC, No. 1150, belt change, 400-5300 rpm, 1/2" cap. 3/4 HP
- Manufacturer
- Powermatic
- Model
- 1150
- Condition
- Used
Description
15", POWERMATIC, No. 1150, belt change, 400-5300 rpm, 1/2" cap. 3/4 HP Model numbers 1150 SPECIFICATIONS: Center of spindle to column 7-1/2" Drilling capacity--cast iron 1/2" Table dimensions 10" x 14" Spindle speeds--number 5 --range 400 to 5300 rpm Quill travel 6" Quill diameter 2-3/16" Spindle motor 1/2 HP Motor speed 1725 rpm Electrics 115/1/60 Weight (approx.) 300 lbs. EQUIPPED WITH: 0 to 1/2" drill chuck Table swivel 90 degrees left and right
Specifications
| Drill Chuck Capacity (mm) | 0–12.7 |
|---|---|
| Drilling Capacity (mm) | 12.7 |
| Frequency (Hz) | 60 |
| Motor Speed (RPM) | 1,725 |
| Operating Weight (kg) | 136.078 |
| Phase | 1 |
| Quill Diameter (mm) | 55.6 |
| Quill Travel (mm) | 152.4 |
| Spindle Diameter (mm) | 381 |
| Spindle Motor Power (kW) | 0.373 |
| Spindle Speed Range (RPM) | 400–5300 |
| Spindle Speeds Count | 5 |
| Table Dimensions (mm) | 254 x 356 |
| Table Swivel Degrees | 90 |
| Voltage (v) | 115 |
Request a quote from A M Metalmaq
Tell A M Metalmaq what you need. They'll reply directly to you.
More in Machine Tools
JET GHD-20PFT GEARED HEAD DRILLING/TAPPING DRILL PRESS WITH POWER DOWNFEED
JET · GHD-20PFT
National Machinery Exchange
DELTA Mdl# 15-07 DRILL PRESS
DELTA · 15-07
National Machinery Exchange
18", ARBOGA, No. G2508, 1-1/4" cap., geared, #3MT, 18" x 25" tbl., manual feed
ARBOGA · G2508
A M Metalmaq
No. RF40, RONG FU, geared head, 8" x 28" table, 1.5 HP, NEW
RONG FU · RF40
A M Metalmaq
15", ROCKWELL, Model 65-000, belt, 1/2" capacity, 1/2 HP
Rockwell · 65-000
A M Metalmaq
20", WILLIS-SOLBERGA, #SE2025/PW, 1.1/1.5 HP, geared, 1" cap., 14" x 20" tbl
Willis-Solberga · SE2025/SE2025PW · 2000
A M Metalmaq
