1/2", ROCKWELL, No. 65-250, 30" x 3-3/4" column, manual, 1/2 HP, floor stand
- Manufacturer
- Rockwell
- Model
- 65-250
- Condition
- Used
Description
1/2", ROCKWELL, No. 65-250, 30" x 3-3/4" column, manual, 1/2 HP, floor stand SPECIFICATIONS: Drilling capacity--mild steel 3/8" --cast iron 1/2" Distance from spindle center to column --maximum 30" --minimum 13" Distance from spindle nose to table --maximum 24-3/16" --minimum 3-1/16" Ram travel 17" Vertical travel of head 10" Column diameter 3-3/4" Table size 18" x 26" Spindle speeds--number 16 --range 175-8200 rpm Drill chuck capacity 0 to 1/2" Spindle taper #2MT Maximum quill movement 6" Spindle motor (two speed) 1/2 HP Electrics 220/440/3/60 Net weight 943 lbs. Dimensions (L x W x H) 46" x 34" x 74" EQUIPPED WITH: Floor stand, Table raising mechanism, Jacobs 1/2" capacity drill chuck Head tilts 90 degrees: 45 deg left, vertical, 45 deg right
Specifications
| Column Diameter (mm) | 95.25 |
|---|---|
| Control Type | manual |
| Dimensions Height (mm) | 1,879.6 |
| Dimensions Length (mm) | 1,168.4 |
| Dimensions Width (mm) | 863.6 |
| Distance Spindle Nose To Table Max (mm) | 614.68 |
| Distance Spindle Nose To Table Min (mm) | 78.74 |
| Distance Spindle To Column Max (mm) | 762 |
| Distance Spindle To Column Min (mm) | 330.2 |
| Drill Chuck Capacity (mm) | 12.7 |
| Drilling Capacity Cast Iron (mm) | 12.7 |
| Drilling Capacity Mild Steel (mm) | 9.525 |
| Frequency (Hz) | 60 |
| Head Tilt Degrees | ±45 |
| Net Weight (kg) | 427.606 |
| Phase | 3 |
| Quill Movement Max (mm) | 152.4 |
| Ram Travel (mm) | 431.8 |
| Spindle Motor Power (kW) | 0.373 |
| Spindle Speed Range (RPM) | 175–8200 |
| Spindle Speeds Count | 16 |
| Spindle Taper | #2MT |
| Table Size (mm) | 457.2 x 660.4 |
| Vertical Travel Head (mm) | 254 |
| Voltage (v) | 220/440 |
Request a quote from A M Metalmaq
Tell A M Metalmaq what you need. They'll reply directly to you.
More in Machine Tools
6' x 17", CARLTON MODEL 3A,1200 RPM,#5 MORSE TAPER,20 HP,SPINDLE TRAVEL 18"
Carlton · 3A
Spirit Machinery
6' x 15", CARLTON,15-1500 RPM,12" SPINDLE TRAVEL,PWR CLAMPING/ELEVATION, 1958
Carlton · 15-1500 RPM · 1958
Spirit Machinery
AMERICAN 4' x 13" RADIAL DRILL
American
National Machinery Exchange
63" x 13-3/4", SUMMIT, #5'H, 5.5 HP, pwr elev, #5MT, 30-2400 RPM, NEW
SUMMIT · #5'H
A M Metalmaq
50" x 12", WILLIS, 7.5 HP, pwr elev, #5 MT, 44-1500 RPM New w/ box table
WILLIS
A M Metalmaq
45" x 11 3/4", WILLIS, 5 HP, pwr elev, #4 MT, 44-1500 RPM New w/ box table
WILLIS
A M Metalmaq
