BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NEW
- Manufacturer
- BENDMAK
- Model
- PRO-100
- Condition
- New
Description
BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NEW OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $ included TECHNICAL SPECIFICATIONS: Shaft diameters--top 3.93 --lower 3.93 Diameter of dies 12 Drive motor 15 HP total Powered rolls All three driven Position repeat LED readout Operating position horizontal/vertical Rolling speed 16' per minute Pipe capacity 4" SCH 40 - 63" radius Angle capacity 4" x 4" x 3/8" - 55" radius Electrics 220/440/3/60 Dimensions 60" x 71" x 63"H Approximate weight 5,150 lbs BENDING CAPACITIES: See descriptive brochure STANDARD FEATURES One set of standard hardened tooling All three rolls driven Automatic surface speed compensation between top and lower rolls Forward and reverse rotation controlled by foot pedal Double-pinch design reducing end flats and permitting single part entry Two lower rolls hydraulically adjustable directly from operator's console Digital readout indicating position of adjustable top roll Operator controls located in a movable type console Manually adjustable guide rolls to take the twist out of most rolled sections Vertical or horizontal rolling operation Emergency stop button located on the operator's console Electrical box with "lock-out" disconnect manufactured in accordance to "CE" regulations
Specifications
| Angle Capacity Thickness Inches | 0.375 |
|---|---|
| Angle Radius Capacity Inches | 55 |
| Design Type | double_pinch |
| Die Diameter Inches | 12 |
| Drive Type | hydraulic |
| Frequency (Hz) | 60 |
| Height Inches | 63 |
| Length Inches | 60 |
| Max Angle Capacity Inches | 4 |
| Max Pipe Capacity Inches | 4 |
| Operating Position | horizontal/vertical |
| Operating Weight (kg) | 2,335.329 |
| Operating Weight (lbs) | 5,150 |
| Phase | 3 |
| Pipe Radius Capacity Inches | 63 |
| Power Output (hp) | 15 |
| Power Output (kW) | 11.186 |
| Powered Rolls | 3 |
| Rolling Speed Feet Per Minute | 16 |
| Shaft Diameter Lower Inches | 3.93 |
| Shaft Diameter Top Inches | 3.93 |
| Voltage (v) | 220/440 |
| Width Inches | 71 |
Request a quote from A M Metalmaq
Tell A M Metalmaq what you need. They'll reply directly to you.
More in Forming
3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
EAGLE · A314-10/7
A M Metalmaq
BENDMAK, 2" x 2" x 1/4", PRO-55, hyd, 3 rolls driven, 3 HP, DP design, NEW
BENDMAK · PRO-55
A M Metalmaq
EAGLE, 3" X 3" X 1/4", CP60-H, hydraulic, 2 rolls driven, 3.5 HP motor, New
EAGLE · CP60-H
A M Metalmaq
BENDMAK, 3" x 3" x 3/8", PRO-80, hyd, 3 rolls driven, 7.5. DP design, NEW
BENDMAK · PRO-80
A M Metalmaq
5' x 7/32", EAGLE, No. A314-156, 5.9" rolls, 12 fpm, 6 HP, NEW
EAGLE · A314-156
A M Metalmaq
3' x 22 ga., PEXTO, #381-D, 2" rolls, manual, on stand
PEXTO · 381-D
A M Metalmaq
