The following items are currently
available. Please contact the
dealer shown directly for more
information. Tell them you saw
the listing on UEN
The number in square brackets [] at
the end of each listing is the dealer's stock number. The
symbol is a link to pictures and/or detailed specifications for
the item.
13/32" x 14' cc, Summit, Gap type,16" o/cs, 4" Spdl bore, taper, 15HP, 1010RPM,New 1988 [58179]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 25/32"x150"cc,VDF Wohlenberg,HD Engine W-57,Tracer,steady rest,tail stock,50HP, in/met thrd [58162]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 27/32"x240"cc,J&L,Progress HD,4"bore,465RPM,30HP AC Spdl,Hyd Tracer,46"Ck, Threading,60s [58134]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 2 1/4" x 20" cc, JET, Sob 8.75",Bore 25/32",Sp6,130-2000Rpm,MT-2,(other Jet avail) (NEW) [480005]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 7" x 10" cc, CENTRAL MACHINERY ENGINE LATHE [1917]
Wenco Machinery Corp Ringwood NJ 888-439-3626 sales@wencomachinery.com 7" x Leblond, Model 7C 15 x 30 center [2766]
Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com 7 1/2" x 40" cc, JET, Gap 9-3/8,Bore 1.5",Sp 40-1800rpm,12 Sp,3Hp,(other Jet avail) (NEW) [480003]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 8" x 30" BRETT ENGINE LATHE [14079]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 8 1/2" x 40" cc, JET, Sob 14",Bore 1.5",D1-4,12 Sp 40-1800Rpm,(other Jet avail) (NEW) [480019]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 9" x 20" cc, JET BENCH-TOP LATHE, NO. BD920, W/ TOOLING **NEW** (NEW) [43]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 9" x 24" cc, HARDINGE, COLLETS, TOOLING, LIGHTED BENCH, 240V [4190]
Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com 9" x 3' SOUTH BEND MODEL #C LATHE [63946]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com 9" x HARDINGE, 1989, 1-1/16" Hole, 5C Collet Closer, 5" 3-Jaw Chuck, Tailstock [310659]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 10"x20" MONARCH EE, Inch/Metric, Sony DRO, 3&4 Jaw Cushman Chucks,tooling,1994 [1154]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 10"x20" MONARCH, EE, Inch/Metric, Solid State Drive, Taper attachment, 1989 [1174]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 10"x20" MONARCH EE, 12.5" swing, Inch/Metric, Solid State Drive, 1985 [1273]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 10" x 20" cc, Monarch, Sony 2-Axis DRO, 8"3-J & 4-H, 1-3/8"Hole, 40-4000 RPM, In/Mm, '72 [1056]
Adams Machinery Co Lincolnwood IL 847-673-0556 adams@adamsmachinery.com 10" x 24" cc, LOGAN, threading, Bed Turret [4991]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 10" SWING, LOGAN LATHE [103147]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com 11" x 18" cc, HARDINGE, HLVH Precision Toolroom Lathe, S/N-HLVH-12427-T, 1986, Tooling, VGC [4329]
Astra Tool Co Grapevine TX 817-481-6528 sales@astratool.com 11"x 18",HARDINGE, Inch/Metric, Chuck and Toolpost, Coolant, 1981 [1156]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 11" x 18" cc, HARDINGE, Inch/Metric, Chuck, toolpost, collets, excellent, 1981 [1352]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 11" x 24" cc, LOGAN, threading, 3J, SR, RTTP, 115 volts [5510]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 11" x 25" cc, EMCO MAXIMAT Super 11, inch/mm, 3J, 4J, FP, SR, QCTP, TD, CC, 1985 [5956]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 11" x 30" cc, Clausing, 6" 3-Jaw Chuck, 5C Collet, Tailstock. [3727]
ACT Machinery Fullerton CA 714-441-1992 act@actmachinery.com 12-1/2" x 18" cc, CINCINNATI TRAYTOP, QUICKCHANGE, TAPER ATTACH [6346]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 12" x 20" cc, Monarch, No. 10EE, 1967, Ser. 49104, 4000 RPM, Solid State, Jacobs Collet Set Up
Astra Tool Co Grapevine TX 817-481-6528 sales@astratool.com 12" x 36" cc, CLAUSING, threading, varispeed, 3J, TD, LOCC, 1982 [5772]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 12" x 36" cc, CLAUSING Series 5900,8" 3 Jaw,tool post [308841]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 12" x 36" cc, CRAFTSMAN, threading, RTTP, 3J, SR, FP [5818]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 12" x 36" cc, LOGAN, 12" X 36" LOGAN TOOLROOM ENGINE LATHE, 40-1400 RPM, STEADY REST, TOOL POST, INCH THREADING [8292]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 12" x 118" cc, VANGUARD ENGINE LATHE, 2006 (NEW) [2414]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 12" x Logan, logan 12" lathe Model 2556VH 1-1/4" spindle Cabinet base [411]
Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com 12" x Logan, Logan 12" Lathe Model 2556VH 1-1/4" spindle Cabinet base [412]
Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com 12 1/2" x 24" cc, CINCINNATI, Tray Top, 45-1800 RPM, 1.3" Spn Hole,3 & 4 Jaw, Taper, FP [3977]
Centra Corp Baltimore MD 410-945-0040 ued@centracorp.com 13" x 25" cc, HARRISON, AA, VS, inch/mm, 3J, TD, Taper, Very Nice [5926]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 13" x 28" cc, Harrisson, HARRISON LATHE Model M300 Serial #313970 Swing 13” x 28” Center to Center Large Face Plate Draw Bar 5C Collets 12 Speed Hea [2767]
Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com 13" x 28" cc, Harrisson, HARRISON LATHE Model M300 Serial #314535 Swing 13” x 28” Center to Center Large Face Plate Draw Bar 5C Collets 12 Speed Hea [2768]
Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com 13" x 30" cc, CLAUSING Metosa C1330 Engine Lathe [303701]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 13" x 40" cc, ANDRY CHOW,2" hole, Thru spindle, Tool post [302503]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com BIRMINGHAM YCL-1340, Engine Lathe, 2 HP, 3J, 4J, 4WTP, NEW (NEW) [5547]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 13" x 40" cc, CLAUSING Engine Lathe, 1-1/2" Bore [303644]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 13" x 40"cc,Clausing,Gear Head,Gap Bed,Hole 1.57",40-2500rpm,(Other sizes available) (NEW) [410001]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 13"x40"cc,ClausingColchester#8027,Socs 8-1/8",Bore 1-9/16",Sp 12 40-2500rpm, other model (NEW) [410015]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 13" x 40" cc, KENT, NO. TRL-1340 ENGINE LATHE **NEW** (NEW) [1857]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 13" x 40" cc, KLS-1340A ENGINE LATHE, **NEW** (NEW) [4413]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com KENT USA KLS-1340 Engine Lathes, 1-1/2" bore, 2 HP, 1 phase motor, NEW (NEW) [5655]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 13" x 40" cc, MSC 951735 Gap Bed, 1995, Tailstock, Steady Rest [310552]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 13" x 42" cc, Clausing Colchester, 2500 RPM, T.A., 4-jaw, 1986 (2)
Tooling & Machinery of Texas Houston TX 713-699-8987 hescoequip@email.msn.com 13" x Acra Turn, model 1340 industrial lathe with Acu-Rite digital readout, year 2000
Ettaco, Inc. Tempe AZ 480-961-5168 equipment@ettaco.com 13" HARRISON, M300, 3 HP, 4" camlock (NEW) [4294]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com SHELDON MODEL #UM-70-P PRODUCTION LATHE [68922]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com 14" x 40" cc, ACER, #1440G, New (NEW) [4426]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com BIRMINGHAM CT-1440 Lathe (NEW) [4035]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com BIRMINGHAM #YCL-1440GH Engine Lathes, 1-1/2" bore, 3 HP, NEW (NEW) [5626]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14" x 40" cc, BIRMINGHAM, Socs 8",Sob 14",Sog 7.8",2Hp,Bore 1.5",(other models avail) (NEW) [460004]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 14" x 40" cc,Birmingham,Socs 8-5/8",3Hp,Bore 1.5",Spnd 45-1,800rpm,D1-4,other models avail (NEW) [460005]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 14"x40"cc,CLAUSING,SOB 14",SOCS 8.66",SH 2.04",Nose D1-6,6/4HP,(Other sizes available) (NEW) [410008]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com Clausing Metosa,14"x40"cc,SOC13.2",SOCS 8.07",SH1.65",4MT,3/4.5HP,(Other sizes available) (NEW) [410002]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 14" x 40" cc, H.ERNAULT-BATIGN, 1 1/2" Spindle bore, 3 & 4 Jaw Chucks, 10 KW Motor [3227helg]
Maverick Machinery Co Inc Atkinson IL 309-936-7731 sales@maverickmachinery.com 14" x 40" cc, KENT, NO. RML-1440VT FREQUENCY DRIVE PRECISION LATHE **NEW** (NEW) [3093]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 14" x 40" cc, KENT ENGINE LATHE, NO. KLS-1440 **NEW** (NEW) [4565]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com KENT USA KLS-1440 Engine Lathes, 1-1/2" bore, 3 HP, NEW (NEW) [5624]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14" x 40" cc, KINGSTON, HQ-1440, NEW (NEW) [4168]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14"x40"cc,KINGSTON HQ1440,Sob14",Socs 8-3/16",SH 2",12 Spd,5 Hp,(other sizes avail) (NEW) [450003]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 14"x40"cc,Millport,Gear head,1 1/2"SH,Eng/Metric,8" 3jaw,10" 4jaw,faceplate, stdyrst,5HP,80's [101246]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 14" x 40" cc, NARDINI, D1-5, 32-2500 rpm, 6/4 HP, NEW (NEW) [4105]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14" x 40" cc, NARDINI, inch/mm, gap, 3J, 4J, SR, FR, QCTP, LOCC, WL, TA, 1995 [6080]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14" x 40" cc, Republic Lagun, 9" 3 Jaw Chuck, 10" 4 Jaw Chuck, 5C Collet Nose, Tailstock [4267]
ACT Machinery Fullerton CA 714-441-1992 act@actmachinery.com 14" x 40"cc, SHARP, #1440V, digital variable speed, D1-4, 1.5" bore, NEW (NEW) [5272]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14" x 40" cc, SOUTHBEND, 1800 RPM, 5-C COLLET CLOSER, S/N 00219TT, NEW 1980 [1563]
C & A Machinery Norwood MA 781-440-0983 sales@camachinery.com 14" x 40" cc, SUMMIT, NEW (NEW) [4599]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14" x 40", SUMMIT, gap, inch/mm, 3J, 4J, SR, FR, QCTP, CL, TD, 1991 [5993]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14" x 40" cc, SWI, ProtoTrak, 1998, Tailstock, 2400 RPM, 6" 3-Jaw Chuck [306561]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 14" x 40" cc, YUASA-TAKISAWA, 80 - 2000 RPM, QUICK CHANGE TOOL POST, STEADY, CHUCK, S/N CDE90177, NEW 12-1979 [1562]
C & A Machinery Norwood MA 781-440-0983 sales@camachinery.com 14" x 43" cc, TOS TRENCIN Engine Lathe, 2-1/4" Hole thru Spindle [303696]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 14" x 60" cc, SUMMIT, NEW (NEW) [5723]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 14"/23" x 60" cc, Zubal With Gap, New 1982, #3696 [3696]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 14" x POLAMCO, 14" X 40" POLAMCO TUM35, 2500 RPM, IN/MM THREADING, 8" 3 JAW, TAPER ATTACHMENT [8540]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 15" x 32" cc, Leblond, 9.5" SOS,D1-6,30-1200rpm,2hp,taper att, 4 & 6 jaw chucks, super shape [5270]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 15" x 34" cc, Leblond, 9.5" SOS, 30-1200rpm, 2hp, 2ph, taper att, from research facility [2224]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 15" x 37" cc, Victor, #1640, 1977, 24" Gap, 2" Bore, 8" 3-Jaw Chuck, Threading [306609]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 15" X 40"CC, MAZAK MATE, 1 1/2"HOLE, 76-2000 RPM [3080]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 15" x 40" cc, Sharp 1540S, 1995, 12" 3-Jaw Chuck, 2 1/8" Spindle Hole [304373]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 15" x 40" cc, SOUTH BEND-NORDI, 8" 3 Jaw, Taper, Tool Post, Collet Attach,2000 RPM,1978 [3421]
Maverick Machinery Co Inc Atkinson IL 309-936-7731 sales@maverickmachinery.com 15" x 41" cc, TONGIL, MODEL TIPL-4, LOADED WITH TOOLING, S/N 0055857, NEW 9/10/1983 [1567]
C & A Machinery Norwood MA 781-440-0983 sales@camachinery.com 15" x 41" TUDOR MAX LATHE [3091]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 15" x 48" cc, LeBlond Regal,30-1200 RPM,10" 6-Jaw Buck Chk,In Thrd,Trava-Dial [25840]
Liberty Machinery Company Lincolnshire IL 847-276-2761 sales@libertymachinery.com 15" x 48" ROCKWELL Engine Lathe, 1-1/8" Spdl Hole, 40 to 1600 RPM, 4-Jaw Chuck [44457]
Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com 15" x 48" cc, Rockwell, 15" x 48", 4 Jaw Chuck, Tail Stock, Chip Pan, 1-1/8" Hole [2703614]
D & D Industries Inc Holland OH 419-866-6894 sales@danddindustries.com 15" x 50" cc, COLCHESTER, gap, inch/mm, 3J, SR, TA, 1990 [677]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 15" x 54" cc, LEBLOND, "Servo Shift", inch, 3 HP, 4J, SR, TD, QCTP, 1967 [4242]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 15" x 54" cc, LEBLOND Regal, S/N-11C702, 1978, Servo Shift
Astra Tool Co Grapevine TX 817-481-6528 sales@astratool.com 15" x 50" cc, HARRISON,MDL:M350, S/N:6017 [2388]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 15" x 78" cc, Monarch, 21-900 RPM, 7.5HP, 21-900RPM, D1-6, from storage, very good [5247]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 15" x CINCINNATI, 15 x 54 cincinnati tray top, 1470 rpm, hard ways, taper, 3 and 4 jaw chuck [8569]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 15" x Leblond, LeBlond Dual Drive Lathe, 15" x 60", Good Cond. [944646]
Used Machinery Sales LLC Elk River MN 888-UMS-SELL machinery@cnctool.com 18.5" x 30" cc PRATT & WHITNEY, 1-11/16" Spdl Hole, Threading, 7-1/2 HP, STK#7709 [28113]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 18.5" x 30" cc PRATT & WHITNEY, 1-11/16" Spdl Hole, Threading, 7-1/2 HP [28113]
Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com BIRMINGHAM YCL-1640, Engine Lathe, 7.5 HP, 3J, 4J, CL, FP, 4WTP, NEW (NEW) [5505]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 16" x 40" cc, KENT, RML-1640T **NEW** (NEW) [2593]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 16" x 40" cc, Mazak-Mate, 1991, 19 43/64" Swing in Gap, 48 Feed Changes, Thrdng [306610]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 16" x 40" cc, NARDINI, D1-5, 32-2500 rpm, 6/4 HP, NEW (NEW) [4409]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 16" x 40"cc, SHARP, #1640LV, digital variable speed, D1-8, 3" bore, NEW (NEW) [5270]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 16" x 40B"cc, SUMMIT, NEW (NEW) [4917]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 16" x 40" cc, Summit SNB-400, 2" Bore, Steady Rest, Threading, Travel Dial [306611]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 16" x 40" cc, VICTOR 1640, 1800 RPM [3000]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 16" x 40" cc, VICTOR 1640, [3001]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 16"x42"cc,Okuma,LS Engine,Taper,2k RPM,2" Spdl Hole,12"Ck,10" gap,10HP,Inc/Met thrd,1964 [58167]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 16" x 54" cc, Monarch, 7-1/2 HP, 3 & 4-Jaw, Steady, Nice, 1969
Machinery Sales Co Inc Memphis TN 800-932-8376 david@machinery-sales.com 16" x 58" Monarch #K, 10.5" SOS, D1-6, 28-1200rpm, 7.5HP, taper att, very good [6019]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com SOUTH BEND, 16 X 60 [304537]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 16" x 60B" cc, SUMMIT, NEW (NEW) [4819]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 16" x 72" cc, American, "Pacemaker", 12" 3-Jaw Ck, Taper, 1000 RPM Max, 4-Way TP, 1943, Runs Good
Foster Machinery Company Inc Charlotte NC 704-847-9449 sales@fostermachinery.com 16" x 80B" cc, SUMMIT, NEW (NEW) [4916]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 16" x 80" cc, SUMMIT, inch/mm, 3" bore, 3J, 4J, TA, CL, TD, 7.5 HP, QCTP, 1989 [5913]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 16"x80"cc,Tos,25"gap,10" 3-jaw & 4-jaw,face plate,travadial,inch & metric thread,steady rest,22-2000 RPM [101108]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com SOUTHBEND MODEL A LATHE [107739]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com 17" x 32" cc, Monarch, 7.5 HP, 36-1500rpm, D1-6, tooling, very fine, from storage, video avail [9199]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 17" x 33" cc, Mori Seiki, inch/mm, 10hp, 32-1800rpm, 10" o/slide, runs good, very good [8113]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com ACER 17" Series Lathes (NEW) [4008]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 40" cc, KENT, ML-1740T PRECISION ENGINE LATHE **NEW** (NEW) [2314]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 17" x 40" cc, KENT ENGINE LATHE, MODEL KLS-1740 **NEW** (NEW) [3733]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com KENT USA 17" x 40" Engine Lathes, 3-1/8" bore, 7.5 HP, NEW (NEW) [5364]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 40", OSAMA SR, #MO-1740G, gap, inch/mm, 4J, SR, toolpost, CL, TD, 1994 [5891]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 40", OSAMA SR, #SJ-1740G, gap, inch/mm, 3J, toolpost, CL, TD, 1984 [5892]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 40" cc, WEBB (WHACHEON), HIGH SPEED, GAP BED, 1800RPM, 5HP MOTOR, TAILSTCK [4681]
Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com 17" x 40", WHACHEON, #WL-435, gap, inch/mm, 3J, SR, TA, 4WTP, CL, TD, 1980 [5894]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 43" cc, KINGSTON, Model HJ-1100, NEW (NEW) [4169]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17"x43"cc,Kerrey,SOCS 9",12 Spd 23-1800RPM,Clnt Pump,Inch/Metric Thread, Tooling/Chucks [101546]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 17"x43 1/2" cc,KINGSTON,Socs 10-9/16",Sw over gap 24",Bore 2.25",Sp nose D1-6 (NEW) [450006]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 17"x54"cc,Monarch,1 5/8"S.H,8" 3Jaw,13" 3Jaw,Full Set of 2-J Collets,Collet Nose Adapter,'57 [101390]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 17" x 60", ACER, gap, inch/mm, Newall DRO, 3J, 4J, SR, QCTP, CL, 1998 [6020]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 60", OSAMA SR, #CY-S1760G, gap, inch/mm, 3J, SR, toolpost, CL, TD, FP [5893]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 60" cc, Sharp #1760, 2" Bore, 10" 3-Jaw Chuck, Taper Attach, Thrdg [306612]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 17" x 67" cc, KINGSTON, Model HJ-1700, NEW (NEW) [4170]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 17" x 78" cc, CLAUSING, GAP BED, TAPER ATTACH, CHUCKS, STEADY, FACE PLATE MFG. 1968 [3413]
Maverick Machinery Co Inc Atkinson IL 309-936-7731 sales@maverickmachinery.com 17" x 120" cc, Southbend, 3 & 4 Jaw Chucks, Inch/Metric, Tail Stock [250366]
D & D Industries Inc Holland OH 419-866-6894 sales@danddindustries.com MONARCH LATHE [107846]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com 17" x South Bend, South Bend CL117C 6 ft bed with taper chuck and 3 jaw chuck steady rest and tailstock. [416]
Hayden Machinery LCC Thomaston CT 860-283-6261 sales@haydenmachinery.com 17 1/4" x 80" cc, CLAUSING COLCHER, Mfg. 1969 Swing over c/s 10 1/", 15" Chuck, 4 Way, [kbos1]
Maverick Machinery Co Inc Atkinson IL 309-936-7731 sales@maverickmachinery.com 17.75"/10.75" x 78" cc LEBLOND, Feeds, Threading, 4-Jaw, Taper Attach, 5 HP, STK#4615 [25599]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 17.75"/10.75" x 78" cc LEBLOND, Feeds, Threading, 4-Jaw, Taper Attach, 5 HP [25599]
Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com 18"/25"x123" MAZAK, 10 HP, 3.125" Hole, In/MM, Taper, Chuck, Steady, Excellent [1321]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 18" x 36" cc, Lodge & Shipley, HD, 15hp, 10.5" o/slide, D1-6, from Navy ship, great [4197]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 18" x 49" cc, Keiyo Seiki, Swing over gap : 24", 9" swing over cross, 12" chuck, email for more specs and photos [1800]
Anderson Tooling Fairfield IA 800-535-8331 kris@usedtooling.com 18" x 50" cc, AFM ENGINE LATHE [3084]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 18" x 54" cc, Axelson, D1-6, 13-1577rpm, 10hp, taper att, good shape [6088]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 18" x 54" cc, Monarch,D1-6, 24-1000rpm, 7.5hp, taper att, impressive condition [8067]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 18" x 60" cc, BIRMINGHAM, Bed width 16",10Hp,16-1600rpm,3-3/16"bore,(other models avail) (NEW) [460001]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 18" x 60" cc, Century, McIlvanie, D1-6, USA, 40-1600rpm, taper att, very good [8122]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 18"/10"x60", Ecoca Mdl 18X60B-EL, 2 Ax w/Mitsubishi PC-1860 CNC Cntrl, 3k RPM, 10 HP, 2-1/4"Bore, '01
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 18" x 60", IRON FLOWER, gap, inch/mm, 3J, 4J, SR, FR, 4WTP, CL, Trav-A-Dial, 199 [5692]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 18" x 80" cc, CLAUS/COLCHESTER, Socs 10.62",Sw in gap 28.74",Sob 18.1",3Sp,20-2000Rpm (NEW) [410013]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 18" x 80" cc, MAZAK,12" chuck, Trak 2-Axis DRO, [304515]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 18" X 100"CC, MAZAK, 3" HOLE, 25-1500 RPM [3079]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 18" x 120" cc, Mazak, 25 - 1500 RPM, 10HP, 3 1/4" Hole, Tailstock [304524]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 19" x 30" cc, Monarch, HD, 5hp, 24-1000rpm, D1-6, 10" o/slide, very good [7013]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 19" x 54" cc, LeBlond Regal Lathe, 1965
Robert F Brown Machinery, Inc Warren MI 586-755-4040 usedmachy@aol.com 19" X 60" AMERICAN 1454 HEAVY DUTY LATHE [3598]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 19" x 60" cc, BIRMINGHAM, NEW (NEW) [4179]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 19" x 60" cc, LE BLOND, 1969,TAPER,3 JAW [4985]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 19" x 64", American, '73, Zipshift, 20hp, taper att, great investment, superb, video avail [4117]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 19"x64 1/2"cc,Howa Sangyo,SOCs 9.5",16 spds 30-1500RPM,Inch/Metric,208V,Trav-A-Dial [101540]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 19"x64 1/2"cc,Howa Sangyo #1500,SOCs 9.5",Trav-A-Dial,Clnt Pump,16 Spd 30-1500 RPM [101541]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 19"x64 1/2" cc,Howa Sangyo #1500,SOCs 9.5",Trav-A-Dial,Clnt Pump,16 Spd 30-1500RPM [101542]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 19" x 72" cc, Cincinnati, 3 & 4 Jaw, Risers, Coolant, 1974
Machinery Sales Co Inc Memphis TN 800-932-8376 david@machinery-sales.com 19" x 72" cc, ROCKFORD, [2815]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 19" x 80" cc, LeBlond Regal, 3" Hole, 1600 RPM, TA, 1980
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com SUMMIT 19-4 x 80" Lathe, NEW (NEW) [4039]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 19" x 96" cc, LeBlond Lathe, 3-1/2" Spindle Bore (Inch & Metric)
Robert F Brown Machinery, Inc Warren MI 586-755-4040 usedmachy@aol.com 19" x 102" cc, LeBlond, No. 1610, H.D., 20 HP, 2250 RPM, T.S. Feed, 3-Jaw Chk., S.R., 1961 [5488]
Turner Industries Inc Grand Rapids MI 616-949-5910 jkraus@turnerind.com 19" x 108" cc, CMC, 19” x 108” CMC HEAVY DUTY PRODUCTION ENGINE LATHE QUOTE# 58-187Z MODEL/TYPE: Model: 19X108 GH AGE: 1950’s SPECIFICA [58187]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com DAINICHI, No. F25, FANUC 21T, 19"SWING OVER BED, 14"SWING OVER CARRIAGE, 1998, [3706]
Presses For Industry Inc Detroit MI 313-839-9300 chip@pfisales.com 19.5"/12" x 8'6" cc AMERICAN, 1-3/4" Spdl Hole, 12" 4-Jaw Chuck, 10 HP, STK#11047 [15570]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 20" x 36" cc,Lodge & Shipley,D1-6,10hp,taper att,very very low hours [9167]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 20" x 40" cc, BIRMINGHAM, DLC-2040, 4-1/8" bore, 10 HP, NEW (NEW) [5627]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 20" x 40",FORTUNE S2040 Gap Bed,2005 Tool Post, Steady/Follow,10"3-Jaw Chuck [310487]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 20" x 48" cc, American, 20 HP 18" Chuck Steady Rest Thrdng Tlstck,2-Axis, #206 [206]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 20" x 52" cc, Monarch, 12" o/slide, 18-17590rpm,d1-6,taper att, fair condition, low price [6218]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 20" x 60" cc, KENT PRECISION LATHE, NO. ML2060T **NEW** (NEW) [3056]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com KENT USA 20" x 60" Engine Lathes, 3-1/8" bore, 7.5 HP, NEW (NEW) [5362]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 20" x 60" cc, Lansing 'R', 29" Swing In Gap, 15 3/4" Width of Bed, 3 1/4" Quill [306233]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 20" x 60" cc, NARDINI, 1989, [8887]
T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com 20" x 60B" cc, SUMMIT, NEW (NEW) [4086]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 20" x 60" cc, SUMMIT,Taper attachment, live center, 4", 3-Jaw, Tool Post [303398]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 20" x 60"cc,Wafum,Tur-50,1800 RPM,2-3/4"Dia bore,D1-8" spdl,15HP clnt,Aloris Tooling,'81 [58168]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com LAGUN LIBERTY, 20" x 65", LL-EC-2065, 2.04" Bore, 40-2200rpm, 7.5hp, in/mm, Gap (NEW) [422]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com 20" x 72" cc, CINCINNATI,taper att- 3 and 4 jaw chuck- steady rest extra tooling [12371]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 20"/11.25" x 78" cc AMERICAN, 1-3/4" Spdl Hole, 14" 4-Jaw Chuck, 10 HP,STK#16440 [32246]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 20" x 78" cc, LEBLOND, 1963,32" swing in gap, 15" width of gap, 1-3/4 Bore [304244]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 20" x 80" cc, BIRMINGHAM, DLC-2080, 4-1/8" bore, 10 HP, NEW (NEW) [5482]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com BIRMINGHAM YCL-2080, Engine Lathe, 10 HP, 3J, 4J, CL, FP, 4WTP, NEW (NEW) [5560]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 20" x 80" cc, Polamco, TUR-50, Hollow-Spindle, Taper, 1800RPM, 15HP, Threading, 1979 [58183]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 20" x 80" cc, SAMSTAR GEARED HEAD ENGINE LATHE, NEW 1997 NICELY TOOLED [8592]
T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com SUMMIT 20" x 80"B Lathe, NEW (NEW) [4040]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2656]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2657]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2658]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2800]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2801]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 20" x 80" cc, VANGUARD, 2000,ENGINE LATHE (NEW) [2802]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 20" x 120" cc, BRIDGEPORT ROMI 20-10,TAPER,16" 3 & 4 JAW [53300]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 20" x 96" cc, LEBLOND, [2812]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 20" x 102" cc, Lodge & Shipley, 25" swing, 14-1160RPM, taper, 3-jaw, 10HP [06273]
Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com 20" x 120" cc, BIRMINGHAM, DLC-20120, 4-1/8" bore, 10 HP, NEW (NEW) [5489]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com BIRMINGHAM YCL-20120, Engine Lathe, 10 HP, 3J, 4J, CL, FP, 4WTP, NEW (NEW) [5561]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com SUMMIT 20" x 120"B Lathe, NEW (NEW) [4544]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 20" x 126" MONARCH MODEL 2013X126 15 HP, 18" 4-Jaw Chuck, Taper, 1980 [2836]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 20" x 197" cc, Lansing, 28-1/2" In Gap, In Metric, 1500 rpm, 4-1/8" Hole, Cks & Stdys, 15hp, 87
Mickleburgh Machinery Co Inc Philadelphia PA 215-545-2210 mickmachy@verizon.net 20.5" x 72" cc LEBLOND, 1-3/4" Spdl Hole, Taper Attach, 4-Way Tool Post, 20 HP,STK #17676 [32912]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 21" x 36" cc, MODEL S, SPRINGFIELD, [3839]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 21" x 48" cc, OKUMA, [304032]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 21"x60"cc,Okuma,LS Engine,1000RPM,2" bore,10HP,Hyd Tracer,loaded w/tools & access.,1970 [58177]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 21" x 72" cc, LeBlond, LEBLOND Engine Lathe, 15" 3 Jaw Chuck, 21" Swing, 72" Center, 2-3/8" Hole, FOB Elk River, MN [944565]
Used Machinery Sales LLC Elk River MN 888-UMS-SELL machinery@cnctool.com 21"x80"cc,CLAUSING Harrison V550/80,SOB 21-7/8",18-1800rpm,(Other sizes available) (NEW) [410007]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 21"/32" x 80" cc, CLAUSING COLCHESTER, 1994,1,800 RPM VARIABLE SPEED,15" CHUCK [53387]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 21" x 80" cc, Kingston, 3" Hole, 4 Jaw, TA, Steady, 1981
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com 21" x 80" cc, Lodge & Shipley, 21 to 1740 RPM, 20HP, D1-6, taper att, exceptional condition
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 21" x 80" cc, Ponar Polamco, TUR50, 18-1800RPM, inch-metric, 10HP, 1978 [08163]
Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com 21" x 118" cc, VDF, 1951, [3072]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 21" x 120" cc, CLAUSING COLCHES, [2923]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 21" x 120" cc, Tarnow, gap bed, model TUJ-50, inch-metric, taper attach, 18HP, 1975 [08164]
Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com 21 1/2" x 36" cc, American, HD, 20hp, 23-1500rpm, model C, L-1, 14" o/slide, xlnt, from storage [9019]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 22" x 60" CAZENEUVE, #HB 575, 3J, 4J, SR, coolant, 4WTP, WL, TD, tracer [6002]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 22" x 60" cc,LeBlond Regal,"Servo-Shift",In/mm Threading,Chuck, ,Tlng'82 [22867]
Liberty Machinery Company Lincolnshire IL 847-276-2761 sales@libertymachinery.com 22" x 60" cc,LeBlond Regal,19" Over C.S.,Threading,10" 3-Jaw Chuck,Chip Pan,1975 [26510]
Liberty Machinery Company Lincolnshire IL 847-276-2761 sales@libertymachinery.com Lodge & Shipley AVS, 12" 3-Jaw Chuck, Threading, Taper Attachment [o27609]
Perfection Machy Sls Inc Elk Grove Village IL 888-212-7731 sales@perfectionmachinery.com 22" x 77" cc, Leblond, Servo shift, 27-1080rpm, 10hp, 2 chucks, very good [8165]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com BIRMINGHAM YCL-2280, 10 HP, 3J, 4J, CL, FP, 4WTP, NEW (NEW) [5967]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 22" x 80" cc, CADILLAC, inch/mm, 7.5 HP, 4J,SR,MS,CL,TD, 4WTP, 2" bore, '86 [5885]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 22" x 80" cc, KENT ENGINE LATHE, ECONOMY SERIES, NO.KLS2280C **NEW** (NEW) [3057]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 22" x 96" cc, Cincinnati, Swing over cross 14",cross travel 16",16-640 RPM, 16" 4 jaw chuck,email for more info and photos [2296]
Anderson Tooling Fairfield IA 800-535-8331 kris@usedtooling.com 22" x 100" cc, YANG, 1995, 14.75 OCS, 29" in Gap, 3 Jaw Chk, Tool Post [5111]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 22" x 104" cc, MONARCH 2043, 2" HOLE, 14-1750 RPM [3075]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 19" x 132" cc, LeBlond, Model 2013 HD, 500 RPM, MT 5, 2" Bore, 13" o/carr, 20 HP, New 1960s - [58189]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com 22" X 80" WEBB MODEL #2260 ENGINE LATHE [110176]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com 23" x 60" cc, BIRMINGHAM, NEW (NEW) [4173]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 23" x 80" cc, BIRMINGHAM, NEW (NEW) [4174]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 23"/16" x 132" cc SPRINGFIELD, 1-3/4" Spdl Hole, Taper Attach, 18" 4-Jaw, STK#13857 [30859]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 23"/16" x 132" cc SPRINGFIELD, 1-3/4" Spdl Hole, Taper Attach, 18" 4-Jaw [30859]
Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com 24" x 48" cc, Monarch,, Mdl 22CM, 400 RPM, Taper Attach, (Greg)
Haron Metals & Equipment Co Hamtramck MI 313-923-4241 info@haronmachinery.com 24"/16" x 60" cc MONARCH, 2-1/4" Spdl Hole, Threading, 16" 4-Jaw Chk, 7-1/2 HP,STK#14082 [30964]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 24"/16" x 60" cc MONARCH, 2-1/4" Spdl Hole, Threading, 16" 4-Jaw Chk, 7-1/2 HP [30964]
Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com 24"x72" cc, LeBlond Servo-Shift, HD, 1300 rpm, Taper, Chuck, Faceplate, Hrd Ways, 30hp, Gove Storage, 52
Mickleburgh Machinery Co Inc Philadelphia PA 215-545-2210 mickmachy@verizon.net 24"x72" LeBlond Servo Shift FCTRY RAISED 25" Swg Ovr Bed, 76" CC's, 1800 RPM, Taper, EXCELLENT!!!
Midway Machinery Co Inc Grand Rapids MI 616-608-7606 nutek@triton.net SUMMIT 24" x 80"B Lathe, NEW (NEW) [5473]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 24" x 88" cc, LAGUN, Liberty LL-ST-24, 3.15" Bore, 30-1500rpm, 7.5hp, in/mm (NEW) [557]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com 24" x 144" cc, LeBlond Regal, 720, 1080 RPM, 6" Roller S.R., 16" 4-Jaw, 10 HP, 1969
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com 24" x 120" cc, Doria, 36"Over Bed,24" Over Carriage,4" S.H.,220V,1969 [101418]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 24" x 120" cc, MAZAK, 1975,Hercules Ajax, Gap Bed,Inch/Metric,Taper Attach. [1405]
Metro Machinery Inc Memphis TN 901-942-3363 sales@metromachinery.com 24" x 120" cc, Mazak, 4" Hole, Metric, TA, Steady, 20hp, 1982
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com SUMMIT 24" x 120"B Lathe, NEW (NEW) [4905]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 24"x120"cc,Schaerer,10'Hydraulic Tracer,3 Jaw,4 Jaw,Steadyrest,3 3/4"SH,30HP,'60's [101340]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 24" x 120" cc, TAKANG, inch/mm, 3J, 4J, SR, CL, 15 HP, 4.1" bore, 4WTP, 1986 [5886]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 24" x 126" cc, Lodge & Shipley, extremly low hrs, 1160rpm, 10hp, pwr rapid trav, video avail [9039]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 24" x 144" cc, LEBLOND SERVO SHIFT, 1976,15" 3-JAW [51803]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 24" x 180" cc, GURUTZPE, MDL SUPER M, 12" GAP LGTH, 34" SW IN GAP, 2.75" BORE, IN/MM [8035]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 24"/35" x 200" cc, DAINICHI, MODEL: DLG-SHB 63X500 NEW:1978, [52859]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 24" x 240" cc, Mazak, heavy duty, inch-metric, 12-1200RPM, 4.18" hole, rapid, 20HP [08135]
Hildebrand Machinery Co Inc York PA 717-846-2600 sales@hildebrandmachinery.com 24" x 250" cc, Lodge & Shipley, Model 20" Lodge-Shipley HD: 14" o/carr, 2.5" bore, 18" chuck - 1960s [58190]
Industrial Resources Inc Old Saybrook CT 860-388-3439 indresinc1@aol.com ACER 24" SERIES LATHES (NEW) [4043]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 25" x 54" LEBLOND REGAL ENGINE LATHE [10196]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 25" x 80" cc, Toolmex (Wafum), #TUR63A, 5-1/2" Sp. Bore, Fr. & Rear 19" Chucks, Taper, 17-1/2 HP, 1979
Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com 25"/14.75" x 8'6" cc AMERICAN, 2" Spdl Hole, Threading, 18" 4-Jaw Chuck, 15 HP [31970]
Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com 25" x 118" cc, DAINICHI ENGINE LATHE, 1968 [2916]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 25" x 118" cc, DIANICHI, 1968, [2908]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 25" x 144" cc, Axelson, 555 RPM, 4 Jaw, TA, Steady, 25 HP
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com 25" x 120"cc, LION C10T ENGINE LATHE [3215]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 25" x 120" cc, Lodge & Shipley, 451 RPM, 8 7/8" Spindle Hole,DRO (no taper or steady rests) [101593]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 25" x 144" cc, Monarch, #2516 Hvy Duty, Taper Chuck, Tooling, 1600 RPM, 20HP, 1962, Excellent
Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com 25" x Monarch, Monarch Model 80 Engine Lathe, 1961, 21" Chuck, 25" Swing over Bed, 16" Swing Over Cross Slide, Var. Spd, Steady Rest, Misc Tooling, FOB: El [944608]
Used Machinery Sales LLC Elk River MN 888-UMS-SELL machinery@cnctool.com 25"/34"x80" Nardini SZ-2580T, In/Met, 18" 3-Jaw, 1500 rpm, 3.1" Hole, Stdy & Follower Rest, 15hp, 1989
Mickleburgh Machinery Co Inc Philadelphia PA 215-545-2210 mickmachy@verizon.net 26" x 40" cc, BIRMINGHAM, DLC-2640, 4-1/8" bore, 10 HP, NEW (NEW) [5681]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 26" x 60" cc, American, 20-2170rpm, D1-6, 18" SOS, 20hp, 2 chucks, stdy rest, mint [7016]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 26"x60"cc,BIRMINGHAM,Bed width 16",10Hp,16-1600rpm,3-3/16"bore,(oth mod avail) (NEW) [460003]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 26" x 80" cc, BIRMINGHAM, DLC-2680, 4-1/8" bore, 10 HP, NEW (NEW) [5549]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 26" x 80" cc, BIRMINGHAM, DL-2680, 4-1/8" bore, 20 HP, NEW (NEW) [5876]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 26" x 80" cc, BIRMINGHAM, YCL-2680, 4-1/8" bore, 10 HP, NEW (NEW) [5878]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 26" x 80" cc, KENT ENGINE LATHE, MODEL#LA-2680 **NEW** (NEW) [3382]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 26" x 90" cc, KINGSTON, Socs 17.5",Sw in gap 35 1/8",Bore 4 1/16",15Hp,Quill diam. 2 15/16" (NEW) [45004]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 26"x96" LEBLOND MODEL 24" HOLLOW SPINDLE GEARED HEAD ENGINE LATHE [5104]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 26" x 120" cc, KENT ENGINE LATHE, MODEL#LA-26120 **NEW** (NEW) [4294]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 26" x 144" cc, LeBlond, 1984, Taper, IN/MM
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 26" x 156" LANG Engine Lathe, 40" Gap, 4" Spindle Bore, Taper, Rapid, 24" 4-Jaw [3969]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 26" x 160" cc, KENT ENGINE LATHE, MODEL#LA-26160 **NEW** (NEW) [4295]
Scott Machinery Inc McClellan CA 916-638-7718 sales@scottmachinery.com 26" x 168" cc, WMW Niles, 1120 RPM, 3 Jaw, Rapid, Steady, 25HP, 1989
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com 26" x 174" cc, American Pacemaker, Taper, 1961
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 26"/16" x 22' MONARCH Engine Late, 2-1/16" Spdl Hole, 12 to 1500 RPM, 25 HP [46008]
Bass Machinery Toledo OH 419-243-2277 sales@bassmachinery.com 27" x 160" cc, Lehman, 321 RPM, TA, Steady, 60's
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com 27"x172" AMERICAN Pacemaker, Style E, 17" over cross, Taper, Hardways, Steady [1364]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 27" x 252" MONARCH MODEL 24N GEARED HEAD ENGINE LATHE [5093]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 27" x 276" cc, Monarch, #24N, 2 Carriages, 303 RPM, PRT, Chuck, Steadies, 30 hp
Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com 28" x 72" cc, American, 3 & 4 jaw chucks, faceplate, taper, 11-450 RPM, 1941, nice runner [419]
Capital Machine Tools Fairfield CT 203-254-1643 dhmach@optonline.net SUMMIT 28" x 80"B Lathe, NEW (NEW) [5716]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com SUMMIT 28" x 120"B Lathe, NEW (NEW) [5717]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 28"/37" x 120" cc, TOS, 1991, INCH/METRIC, TAILSTOCK, STEADY/FOLLOW [52884]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com SUMMIT 28" x 160"B Lathe, NEW (NEW) [5663]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 28" x STANKO, MODEL 1M63B, ENGINE LATHE [1592]
Trader Machinery Inc Concord ON 905-669-7507 trader@tradermachinery.com 28"/38.5"x120" TOS SN71C, 1000rpm, inch/metric, 18" 3-Jaw, Hard Ways, 3"Bore, 2 Stdys, PRT, 15hp, 1990
Mickleburgh Machinery Co Inc Philadelphia PA 215-545-2210 mickmachy@verizon.net ACER 29" x 80" Lathes (NEW) [5589]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com VICTOR Model 2980T 29" x 80" Lathes (NEW) [5800]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com ACER 29" Series Lathes (NEW) [4046]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com Colchester 15" x 30", 8" Chuck, Tailstock [310312]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com SUMMIT 30-4 x 80" Engine Lathe, NEW (NEW) [5189]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 30" x 120" cc, Kingston, 1982, Taper, 4" Hole
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com SUMMIT 30-6 x 120" Engine Lathe, NEW (NEW) [6074]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 30" x 160" cc, Kingston,4" hole, 4 jaw, TA, Steady, 20hp, 1992
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com 30" x 160" cc, SIGMA TO, MDL SUS63, 15.3" SWOCS, 30 HP, 1220 RPM, 3.3" HOLE, INCH/METRIC, 16" 3-JAW, 1981 [7946]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com SUMMIT 30-4 x 160" Engine Lathe, NEW (NEW) [4078]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 30"/38" x 160" cc, TIMEMASTER, 1999, 1,000 RPM,TAPER,24" CHUCK [52857]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 30" x 168" cc, AMERICAN, [2813]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com SUMMIT 30-4 x 200" Engine Lathe, NEW (NEW) [5175]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 30"x240" DAINICHI, DHK, 3.3" hole, in/mm, Taper, DRO, Chuck, Steadies, 1996 EXC [1331]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com SUMMIT 30-4 x 240" Engine Lathe, NEW (NEW) [5176]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 31 1/2" x 120" cc, TRU-TURN, GAP BED 39-1/2", 4-1/8" HOLE, TAPER ATTACHMENT, 1000 RPM, NEW 1993 [1278]
C & A Machinery Norwood MA 781-440-0983 sales@camachinery.com 32"/42"x160" MAZAK, Heavy Duty,20 HP,4" Hole, in/mm, DRO,Chuck,Steady Rests,1978 [1325]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 32" x 60" cc, BIRMINGHAM, DL-3260, 5-1/8" bore, 20 HP, NEW (NEW) [5680]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 32" x 80" cc, BIRMINGHAM, DL-3280, 5-1/8" bore, 20 HP, NEW (NEW) [5875]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 32"x96" DEAN SMITH & Grace, 25 HP, 4.75" Hole, 22.75" o.c.s., 30" Chuck, Gov't [1294]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 32" x 120" cc, American Pacemaker, Taper, Hardways
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 32" x 120" cc, BIRMINGHAM, DL-32120, 5-1/8" bore, 20 HP, NEW (NEW) [5931]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 32" x 144" cc, LEBLOND, 1966, [2731]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 32" x 168" cc, LEBLOND, 1956, [2814]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 32"x168" LEBLOND, 3220NF Heavy Duty,40 HP,Taper Attachment, Chuck, Steadies,1967 [1300]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 32" x 288" cc, Bertram, Steady Rest, Follow Rest, 4-Jaw Chuck
SMF & Machine Tools Inc Little Rock AR 800-643-5839 33" x 100" cc, American, Swing over cross 23", 6-260 RPM, 24" chuck, 2 3/4" thru hole,email for more info [33100]
Anderson Tooling Fairfield IA 800-535-8331 kris@usedtooling.com 33" x 120" cc, SUMMIT, inch/mm, gap, DRO, 3J, 4J, SR, FP, TA, QCTP, CL, 1977 [6021]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 33"/48 x 157" cc, SOUTHBEND MODEL: 850D, 1980'S, INCH/METRIC, DRO, [52886]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 34"x25" cc,KINGSTON,HP3000,Socs 25",30hp,ASA A2-15,S.h.7.09",Eng/Met,Other sizes avail) (NEW) [450001]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 34" x 240" (20') cc, VDF Wohlenberg, No. S710, 3-Jaw Chuck, 14" Steady Rests, 1963, Good
Hadanich Machine Manufacturing Washington PA 724-225-2440 hadanich@pulsenet.com 34"x288" AMERICAN Pacemaker, F3, 30 HP, 25"over cross, Taper, Chuck, Steadies 57 [1363]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 35" x 198" cc, VDF, 1959, [3074]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 36" x 118" POREBA HEAVY DUTY LATHE [1878]
Trader Machinery Inc Concord ON 905-669-7507 trader@tradermachinery.com 36"x120" cc,Satesa,1988,220 3 phase,3 jaw,4 jaw,steady rest,follower rest,misc t [287592]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 36" x 236" cc, POREBA, 1989, [9227]
T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com 36" x American, 120" between centers, tailstock, all electronics recently updated at Anderson Tooling [011]
Anderson Tooling Fairfield IA 800-535-8331 kris@usedtooling.com 37" x 96" cc, LODGE & SHIPLEY, N/C Mitsubishi Meldas L3 Control,12-1/2" Bore [302196]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 37"/49"x197" TIMEMASTER 30 HP, 27.5"sw ocs, 4" Hole, in/mm, DRO, Steadies, 2001 [1361]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 38" x 120" cc, ANYANG, 1998, DRO, Steady Rest, Chucks, Aloris Tool Post, [311124]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 38"/23" x 13' cc CRAVEN, Inch/Metric Threading, 16" & 25" Steady Rests, 20 HP, STK#8746 [28792]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com 40" x 27" cc, Monarch, 32NN, Taper, Hardways
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 40" x 36" cc, Monarch, 1966
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 40" x 60" cc, BIRMINGHAM, DL-4060, 5-1/8" bore, 20 HP, NEW (NEW) [5576]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 40" x 80" cc, BIRMINGHAM, DL-4080, 5-1/8" bore, 20 HP, NEW (NEW) [5821]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 40" x 108" cc, LEBLOND, 1967, [2815]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 40" x 120" cc, BIRMINGHAM, DL-40120, 5-1/8" bore, 20 HP, NEW (NEW) [5761]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com 40" x 120" cc, KINGSTON, Socs 31",Sp12-1200rpm,Sw in gap 50 3/8",Cr slide trav 21 1/4" (NEW) [450007]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 40" x 140" cc AXELSON,SLIDING GAP BED,26" OVER XSLIDE,750 RPM,42" FACEPL, 1965 [72699]
Spirit Machinery, Inc. Farmingdale NY 631-249-4444 sales@spiritmachinery.com 40" X 176", MARTIN DS-99 [2961]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 40" x 180" cc,LeBLOND, 1973 MODEL "NK" SUPER HEAVY DUTY, 75 H.P., 55,000 LBS [9232]
T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com 40" x 234" cc, American Engine Lathe, 1975
N & R Machine Sales Sealy TX 800-245-3194 sales@nrmachinesales.com 40" x 25' NILES Engine Lathe, 2 Carriages, Full Length Taper, 4-Jaw Chuck [4578]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 40" x 323" cc, American,HD, 25"Over Cross Slide, 32" 4 Jaw, Read out, 1970's
Hesco Equipment Sales Co Inc Houston TX 713-699-4766 sales@hescoequipment.com 40" x 342" cc, MONARCH 32NN,STEADY RESTS,16-950 RPM,25 HP [78967]
Spirit Machinery, Inc. Farmingdale NY 631-249-4444 sales@spiritmachinery.com 40" x 480" cc, Gishold Masterline Engine Lathe, 9.5"Bore, 28" 4-Jaw Chuck
Hadanich Machine Manufacturing Washington PA 724-225-2440 hadanich@pulsenet.com 42" x 144" cc, LEBLOND, 1954, [2818]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 42" x 192" STANKO HEAVY DUTY LATHE [1877]
Trader Machinery Inc Concord ON 905-669-7507 trader@tradermachinery.com 42"x203" TOS SU100 Gear Headed Engine Lathe, In/Mt, 28" SOCS, 35hp, Steady Rests [5095]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 42" x 247" cc MEUSER M4L,54"OVER GAP,32" OVER X-SLIDE,STEADIES,3"HOLE, 1966 [55409]
Spirit Machinery, Inc. Farmingdale NY 631-249-4444 sales@spiritmachinery.com 42" x 276" cc, LODGE & SHIPLEY, 1964, "MAGNA-TURN" HEAVY DUTY LATHE [8936]
T R Wigglesworth Machinery Co Bedford OH 440-232-6660 leads@wigglesworth.com 42" x 300" cc, LEBLOND ENGINE LATHE, 1965 [2787]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 43" x 192" cc, Clovis, 17" 3-Jaw Chuck, 32" 4-Jaw Chuck, Rapid Traverse, Thrdg [303379]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 43" x 282", AMERICAN Pacemaker, 40 HP, 30" ocs, Taper, Steady Rests, Chuck, 1952 [1357]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 44" x 35" cc, American Pacemaker, 1952, Hardways, (2)
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 44" x 156" cc, AMERICAN, [4994]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 45"x186" MONARCH, Series 91, 50 HP, Taper, 31"swing ocs, Steady, Toolpost, 1965 [1369]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 46" x 74" AMERICAN PACEMAKER Engine Lathe, 34" Face Plate, Tool Post, Threading [4353]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 46" x 74" cc, AMERICAN, WITH SCAN-O-MATIC TRACER, 600 RPM, 31" VOER CROSS, [8133]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 47" x 240" cc, US Industrial, 3 & 4 Jaw Steady & Follow Rest, Options 4.13" Spindle Hole, New
Machinery Sales Co Inc Memphis TN 800-932-8376 david@machinery-sales.com 48"x60"cc,Boye/Emmes,S.H 10"Steps down to 3",48"-4 Jaw,300RPM,15HP,220/3PH, 50's-60's [101492]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com 48/70" x 40" cc, Kotobuki, #FL6, Hvy Duty, 36" 4 Jaw Ck, 200 RPM, Inch/Metric Threading, 15 hp, 1967
Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com 48" x 228" cc, LEBLOND, 1956, [2557]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 49"/63" x 240" cc, GEMINIS, 47" 4-JAW, 550 RPM, 34" OVER C/S, THREADING [53332]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 49 1/2" x 228" cc, MONARCH, MONARCH 36NN, 49.5" SWING X 228" CC, 24" 4 JAW CHUCK, TAPER ATTACHMENT, RAPIDS, STEADY REST [8256]
Wisconsin Metalworking Machy Waukesha WI 262-548-6080 kevin@wismet.com 50" x 27" cc, American Pacemaker, 1953, Hardways, Taper.
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 50" x 51" cc, Monarch,2 carriages, taper, 1958
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 50"/67" x 157" cc, NEW TRU-TURN MODEL: CW62125DX4000 GAP BED ENGINE LATHE (NEW) [51290]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 53" x 251" cc, Poreba TR-135B, 1981, 4.75" Bore, 50" 4-Jaw Chuck, Hard Ways [303114]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 54" x 163" cc,Leblond,NR,3.25" spdl,50hp,pwr feed & PRT,from storage,low hrs,video avail [9236]
Machinery Consultants Inc Salt Lake City UT 801-531-9500 mci@toolmachine.com 56"x192" AMERICAN Pacemaker, 40 HP, 42"over cross, Taper, Hard Ways, 1956 [1359]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 56" x 192" cc, American Pacemaker, Taper, 1957
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 56" x 200" cc, SKODA, 35" OVER C/S, DRO, STEADY RESTS, 49" FACEPLATE [51711]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 56" x 216"cc, Skoda SRM-125, 1968, 43" Ways, 7" Tailstock Quill,(3) Steady Rests [303113]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 60"x 66" MONARCH, Series 91, 60 HP, 49"swing ocs, Taper, 36" 4 Jaw Chuck, 1976 [1375]
Wigglesworth Machinery Co East Boston MA 617-567-7210 sales@wigglesworthmachinery.com 60" x 420" cc, LEBLOND, 1981, [3050]
Standard Indl Machy Co Inc Oxford AL 256-831-1211 sales@standardindl.com 62" x 68" cc, Monarch, 1976, Taper
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 62" Poreba Facing Lathe, 2 Slides, 2000
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 63" x 72' cc, Tuda, 1985
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 63"/80 x 157" cc, NEW TRU-TURN MODEL: CW62160D/4000 GAP BED LATHE (NEW) [51289]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 64" x 498" American Geared Engine Lathe, 498"cc, 48" 4-JAW CHUCK, TAILSTOCK [4968]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 66" x 384" cc, Meuser, 1975, Hard Ways, 4 1/2" Hole, Tailstock, 4-Jaw Chuck [303495]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com 74" x 228" cc, LEBLOND,REBUILT 1990'S, 55" OVER C/S, 48" FACEPLATE, TAPER [53241]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com LEBLOND, 74" SWING, 228" CC [74869]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com 74" x 315" cc, SAFOP, 1967,61" 4-JAW, 155 RPM, GRINDING ATTACHMENT, THREADING [51966]
Prime Machinery Inc Oyster Bay NY 516-922-7977 Sales@Primemach.com 75" x 360" BERTRAM ENGINE LATHE WITH 140" BED EXTENSION [5082]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com 78" x 144" cc, American, H.D.
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 79" x 50" cc, Waldrick-Siegen H.D. Lathe
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 105" x 35' cc, LeBlond HD, 1977, 90" over cross slide, Hardways, Taper, 300 RPM
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com 110" x 348" NILES ENGINE LATHE [3218]
Turners Machinery Inc Santa Paula CA 805-525-2171 brent@turnersmachinery.com 112" x 312" CRAVEN 60HP, 2Steady Rests, 96" Face Plate w/4-Jaws, 2 Front & Rear Carriages, BH [4534]
Scott Machinery & Supply Inc Helena AL 205-664-9644 info@scottmach.com CRAVEN, 112" SWING, 312" CC [74873]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com 112" x 312", Craven Heavy Duty, 96" 4 Jaw Chuck, 4 Way Bed, 36 Rpm, 4 carriages, 60hp, 1949
Raco Industrial Corp Des Plaines IL 847-298-8600 sales@raco.com VDF WOHLENBERG, M-1600B HEAVY DUTY MANUAL LATHE, 264" CC, 64" Chk [74170]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com CLAUSING MODEL #8112, COLCHESTER ENGINE LATHE [110179]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com DeVlieg, 4" DeVlieg Jig Mill, 4H60, with tooling,
Belmont Machinery Co Aurora IL 630-844-9288 sales@belmontmachinery.com LEBLOND ENGINE LATHE [110181]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com LEBLOND, 36" X 324" LEBLOND, 23-1/2" OVC, 255 RPM, [54835]
Yoder Machinery Co Holland OH 800-622-4463 ueduen@yodermachinery.com LEBLOND REGAL ENGINE LATHE [74264]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com LION, C11MT, ENGINE LATHE, NEW: 1994 [74268]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com LODGE & SHIPLEY MODEL #2013 POWERTURN, ENGINE LATHE [110182]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com LODGE & SHIPLEY 20" X 78" [74263]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com MONARCH MODEL #61 LATHE [110180]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com MORI-SEIKI, MS-1250 [74260]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com Monarch, 1942 machine, model EE, no tracer [101057]
Nevins Machinery Concepts Inc Brockton MA 508-894-0008 sales@nevinsmachinery.com NARDINI 15" Nodus Lathes, New (NEW) [4138]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com NARDINI Nodus 17" Series Lathes, New (NEW) [4139]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com SAFOP, LEONARD 1500-TR MANUAL LATHE, 61" Chk, NEW: 1966 [74171]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com STANDARD MODERN ENGINE LATHE [110178]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com VDF WOHLENBERG, V1800B HEAVY DUTY ENGINE LATHE [74172]
Machinery Resources Int'l Inc Woodland Hills CA 877-568-2121 sales@machineryresources.com Yuasa / Takisawa LX-1440, 14" x 40", Tailstock, Accurite DRO, 2000 RPM, 8" Chuck [310313]
Automatics & Machinery Co Inc Longmont CO 800-543-7666 sales@automatics.com CLAUSING METOSA 15" & 17" Series Lathes (NEW) [4033]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com ACER 20GH Series Lathes (NEW) [4084]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com CLAUSING METOSA 20" & 24" Series Lathes (NEW) [4087]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com CLAUSING METOSA 15" & 17" Variable Speed Series Lathes (NEW) [4200]
A M Metalmaq Inc Hialeah FL 305-883-9200 sales@ammetalmaq.com AMERICAN TURNMASTER, 13" x 40" cc, AT-1340-G, 1-9/16" Bore, 5hp, 15-2570rpm, Gap (NEW) [411]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com LAGUN LIBERTY, 13" x 40", LL-EC-1340, 1.65" Bore, 60-2000rpm, 3hp, in/mm, Gap (NEW) [419]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com LAGUN LIBERTY, 14" x 40", LL-EC-1440, 1.65" Bore, 60-2000rpm, 4hp, in/mm, Gap (NEW) [420]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com AMERICAN TURNMASTER, 15 x 50" cc, AT-1550-G, 2-3/16" Bore, 7hp, 25-2000rpm, Gap (NEW) [412]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com LAGUN LIBERTY, 16" x 40", LL-EC-1640, 1.65" Bore, 60-2000rpm, 5.5hp, in/mm, Gap (NEW) [421]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com AMERICAN TURNMASTER, 18" x40-120", AT-1840/-G, 3-1/16" Bore, 10hp,20-1600rpm,Gap (NEW) [413]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com AMERICAN TURNMASTER, 18"x 60/80", AT-18-EVS,Inf Var Spd,3-1/16"Bore,10hp,20-1600 (NEW) [415]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com WAFUM MODEL #TUD40/60, ENGINE LATHE [110177]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com AMERICAN TURNMASTER, 21" x40-120", AT-2140/-G, 3-1/16" Bore, 12hp,20-1600rpm,Gap (NEW) [414]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com AMERICAN TURNMASTER, 35-50"x 60-480", Power One Series, 6" Bore, 20hp, 6-740rpm (NEW) [416]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com AMERICAN TURNMASTER, 45-70"x 60-800", Power Five Series, 6" Bore, 30hp, 7-700rpm (NEW) [417]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com AMERICAN TURNMASTER, 70-100"x 80-480", Power 7 Series, 9" Bore,50hp EVS,7-700rpm (NEW) [418]
Highland Machinery & Crane Benton Harbor MI 269-926-9600 sales@highlandmachinery.com 20" LODGE & SHIPLEY ENGINE LATHE [70145]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com LEBLOND, 19"Chk, 80" REGAL, 3 JAW CHUCK LATHE ways worn near front-deal rjg [9325]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 20" x 84" REED-PRENTICE LATHE [69545]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com VICTOR, No. 1640, [10190]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com 5" X 20" CLAUSING "COLCHESTER" MANUAL LATHE [10194]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com STARK TABLE MOUNTED LATHE [101257]
National Machinery Exchange Newark NJ 973-344-6100 sales@nationalmachy.com MODEL DV-59/DSM-59 HARDINGE ENGINE LATHE, 1984 APPEARS NEW NEVER USED. [6250]
Gibbs Machinery Company Warren MI 586-755-5353 sales@gibbsmachinery.com
The Used Equipment Network site is also available in the original fully interactive version which provides for more complicated searches, entry of your own surplus and wanted listings, and many other features. We invite you to try out the full site.
symbol is a link to pictures and/or detailed specifications for
the item.
