0C8030 CUT-OFFS, PIPE, TUBE & BAR
4" BARDONS & OLIVER #36 Cut-Off, 30 HP Our reference: 44788

Click on picture below for larger version

ADDITIONAL INFORMATION on this equipment is available as a PDF. Caution: this may be large file.

AGE: 1976

(2) Of The Cut-Offs Are Attached End-To-End (See PDF File) And

Are Fed By 100' Of Conveyor. The Other (2) Cut-Offs Do Not Have
Conveyors And Are Set Up With End Stops. (2) Cut-Offs Have
Elevator Bases And (2) Do Not.

SPECIFICATIONS:

Capacity: 3/4" to 6 5/8"
Feed Out Rate, Adjustable: up to 200 FPM Max.
Max. Collet Capacity Diameter: 6-5/8"
Hole in Collet & Plunger: 7-3/8"
Max. Opening of Collet on Diameter: 5/8"
Cut-Off Slides, Max. Travel: 4"
Cut-Off Slides, Width: 8-1/2"
Center of Spindle to Top of Slides: 5-5/8"
Stock Stop, Max. Length, Std. Bar: 30"
Stock Stop, Max. Length, Spec. Bar: 10' or 20'
Spindle Speeds: (64) 79 - 1013 RPM

EQUIPPED WITH:

Sump & Coolant System
Self Contained Hydraulic Unit
Manual Controls

NOTE: Believe All The Machines Were Used To Crop Cut Pipe

MOTOR DATA: 30 HP, 1800 RPM

At Location ...........................
Photos Available

Return to Menu (Use your BACK function to return to previous screen.)