0G4765 GRINDERS, CYLINDRICAL_PLAIN, ANGLE HEAD, N/C & CNC
13" x 40", Okuma, No. GA-34N,60 Deg.Angle Hd.Okuma OSP5020 Ctrl,Marpos E5,1995 Our reference: 22352

Click on picture below for larger version

Serial No. 0304 New - 1995

SPECIFICATIONS:

Between Centers 40.00"
Swing Over Table 12.99"
Grinding Diamter - Maximum 11.81"
Workpiece Weight - Maximum 330 Lbs.
Wheel - Size 15.94" OD x 2.95" W x 5" ID
- Maximum Peripheral Speed 8859 IPM
- Speeds 2,600 RPM
Wheelhead - Installing Angle (to table travel) 60 Degrees
(X-Axis) - Total Travel 11.61"
- Travel per Pulse Hand Revolution 0.01", 0.1", 0.5"
- Travel per Pulse Handle Graduation 0.0001", 0.001", 0.005"
- Auto-infeed Rate 0.00005 - 236 IPM

- Positioning Rate 472 IPM
- Minimum Programmable Increment 0.00001"
Table - Swivel Range 0 - 10 Degrees
(Z-Axis) - Total Travel 47.64"
- Travel per Pulse Hand Revolution 0.01", 0.1", 0.5"
- Travel per Pulse Handle Graduation 0.0001", 0.001", 0.005"
- Auto-infeed Rate 0.00002 - 236 IPM

- Positioning Rate 472 IPM
- Minimum Programmable Increment 0.00001"
Workhead - Center Hole MT No. 4

(C-Axis) - Work Spindle Speeds 25 - 600 RPM
- Spindle Override 50 - 200%
- Swivel Angle 90 Degrees
- Spindle Nose ASA A1-5
- Chuck Diameter 7.87"
Footstock - Center Taper MT No. 4
- Center Position Adjust Amount (manual) 5.91"
- Auto-stroke Hydraulic Drive 1.97"
Motors - Wheel Spindle Drive Motor 7.5 - 4 HP-P
- Work Spindle Drive Motor 3.2 HP (brushless motor)
Coolant Tank 26.4 U.S. Gallons
Approximate Weight 11,880 Lbs.

EQUIPPED WITH:
OSP 5020 Programmable Control
Grinding System is Plunge, Multi-Plunge, End Plunge, OD, and End Simultaneous
Plunge, Parallel Traverse, Taper Traverse, and Profile Grinding.
Marpos E5 Gauging
Automatic Wheel Truing
Coolant Filtration System with Magnetic Drum Separator
Miscellaneous Tooling
All Available Books, Manuals, and Drawings

*Preliminary Specifications are Subject to Verification.

Return to Menu (Use your BACK function to return to previous screen.)