SPECIFICATIONS:
Distance Between Centers 31.69" (805 mm)
Turning Diameter - Maximum 21.65" (550 mm)
Turning Length - Maximum 24.01" (610 mm)
Spindle Center Height from Floor 41.73" (1060 mm)
Headstock - Spindle Nose JIS A2-8
- Spindle Diameter 6.29" (160 mm)
- Hole Taper 4.52", 1/20 (115)
- Hole through Spindle Diameter 4.33" (110 mm)
- Spindle Support By Roller Bearing at Two Points
Spindle Drive - Number of Spindle Speed Stepless
Spindle Speed 20 - 2000 RPM/Min.
Spindle Speed Command Method Speed of Revolution Direct Command
Constant Surface Speed Cntrl Avail
Spindle Speed Override at 10% Steps 50 - 200%
Type of Turret V12 + V12 (Shorter Rev. Indexing)
Turret Maximum Number of Tools 12 + 12 Piece
Turret Standard Tool JIS No. 4 (Sq. 25 mm)
Turet Boring Bar Diameter 50" (40 mm)
Axis Feed Travel - X-Axis 12.59" (320 mm)
- Z-Axis 24.01" (610 mm)
Axis Feed Rapid Traverse Rate - X-Axis 472 IPM (12 m/Min.)
- Z-Axis 472 IPM (12 m/Min.)
Axis Feed Cutting Feedrate 0.00001 - 19.68"/Rev.
0.0001 - 500 mm/rev.
Axis Feed Cutting Feed Override 0 - 200% at 10% Steps
Main Spindle Motor 30 HP x 2
Floor Space Required Width x Depth 137.99" x 113.77" (3505 x 2890 mm)
Overall Machine Height 129.92" (3300 mm)
Approximate Weight 41,800 Lbs. (19,000 kgf)
EQUIPPED WITH:
Fanuc Model O-TT Control
(2) Chip Conveyors Disposed to the Rear of the Machine
High-Power Spindle Specifications - 20 - 2000 RPM (AC 22/30 kW)
15" 3-Jaw Serreted Type Howa H01MA15 (A2-8 Direct) Hydraulic Chuck (Dust -
Waterproof)
*Preliminary Specifications Subject to Verification.
Return to Menu
(Use your BACK function to return to previous screen.)
