0G1100 GEAR HOBBERS, HORIZONTAL
No. A21/2, Mikron,Bowl Feed, 1.6" Max Dia., Stack/Load Attachment, 1980 Our reference: 18446

Click on picture below for larger version

Serial No. 956-71-80-005/501 New - 1980

SPECIFICATIONS:
Maximum Diameter that can be Hobbed @ 24 mm (.95") 40 mm (1.6")
Travel of Hob - Maximum 40 mm (1.6")
Length that can be Clamped - Maximum 75 mm (2.96")
Swivelling Range of Hob Spindle - Maximum +/- 6 Degrees
Axial Displacement of Hob Spindle - Maximum 10 mm (0.4")
DP in Steel - Maximum 20,3
Number of Teeth with Normal Indexing Gear Train 5 - 399
Number of Teeth with Special Indexing Gear Train 3 -240
Number of Teeth with Special Indexing Gear Train 25 - 3200
Horizontal/Vertical Feeds Inf. Variable between 0-15mm/sec (0.-59")
Hob Speed in Geometric Progression between 400 - 4800 RPM
Electrical 440 V, 3 PH, 60 Hz
Approximate Weight 650 kg (1,433 Lbs.)
Approximate Dimensions 840 x 1025 x 1350 mm
33" x 40.4" x 53.2"H

Motors:
Main Motor (m 3) 1,1 kW (3600 RPM)
Hydraulic System Pump (m 1) 0,18 kW (1800 RPM)
Coolant Pump (m 2) as Required 0,06 kW (3600 RPM)
0,11 kW (3600 RPM)
Tension Volts
Frequency Cycles

EQUIPPED WITH:
Mikron Type 90 Fully Automatic Stacking & Loading Attachment
Deburring Attachment

SPECIFICATIONS FOR STACKING & LOADING ATTACHMENT:
Power Input 70 W
Capacity of the Pot for Blanks 2, 5 - 10 mm Diameter 0,25 litre
Capacity of the Pot for Blanks 10 - 20 mm Diameter 0,8 litre
Blank Diameter - Maximum 20 mm
- Minimum 2,5 mm
Blank Thickness - Maximum 1/2 Workpiece Diameter
- Minimum 0,04 mm
Length of Stack - Maximum 20 mm
Number of Blanks per Stack Depends on Stack Length
Loading Time 3 Seconds

*Preliminary Specifications Subject to Verification.

Return to Menu (Use your BACK function to return to previous screen.)