0L2155 LATHES, COMBINATION, N/C & CNC, 3-AXIS OR MORE
GIDDINGS & LEWIS SMARTTURN H-15, CNC CHUCKER, NEW: 1992 Our reference: 30704

SPECIFICATIONS:

MAX SWING OVER SLANT BED WAYS 30" DIAMETER
MAX SWING OVER TURRET SLIDE WAYS 20" DIAMETER
MAX DIAMETER TURNED 18" DIAMETER
MAX LENGTH TURNED 32" LONG
TOOLING TURRETS 2, EACH INDEPENDENT
TOOLING TURRET,UPPER W/LIVE DRIVES 12 POSITIONS
LOWER W/LIVE DRIVES 12 POSITIONS
TOOLING TURRET TRAVELS, UPPER 12.28"X-AXIS CROSS
34.96"Y-AXIS LONG
TOOLING TURRET TRAVELS, LOWER 12.28"X-AXIS CROSS
34.96"Y-AXIS LONG
TOOLING TURRET LIVE DRIVE SPEEDS 3000 RPM
TOOLING TURRET RAPID TRAVERESE RATES 700" IN/PER/MIN
SPINDLE SPEEDS,VARIABLE/PROGRAMMABLE 31 RPM TO 2500 RPM
SPINDLE POSITIONING, C-AXIS +/- 1/2 DEGREE
SPINDLE NOSE CONFIGURATION A2-11
SPINDLE INTERBAL DIAMETER 5.27"DIA
SPINDLE CENTERLINE TO FLOOR 37.5"
MAIN DRIVE SPINDLE MOTOR 56 HP.460/3/60
LIVE TURRET TOOLING DRIVE MOTORS 7-1/2 HP VARI-SPEED
APPROX MACHINE WEIGHT 24,000 LBS
APPROX OVERALL DIMENSIONS 230"L-RX137"F-BX91"H

EQUIPPED WITH:

G.E.FANUC 15-TT-A, 4-AXIS + C-AXIS, CNC MACHINE CONTROL SYSTEM
WITH- 13" COLOR, PROGGRM & MACHINE FUNCTION DISPLAY SCREEN.
OPERATING MODES-AUTO/SINGLE CYCLE/MDI/MANUAL
BLOCK DELETE/OPTIONAL STOP/REPEAT CYCLE.
FULL "MDI" KEYBOARD AND MACHINE CONTROL PANEL.
RS-232 PROGRAN UP/LOAD & DOWN/LOAD COMM PORT.

TO INCLUDE:

NEW 18" DIA 3-JAW, HYDRAULICALLY OPERATED, WORKHOLDING CHUCK
WITH ONE SET FOR BOLT ON REVERSIBLE JAWS.
NEW 12" WIDE "JORGENSEN" UNIVERSAL, FLAT TYPE, FULL BED LENGTH
CHIP CONVEYOR, RIGHT END DISCHARGE, ELEVATING TYPE TO 62".
INTERNAL COOLANT SYSTEM W/1 HP "GUSHER" PUMP MOTOR & PIPING WITH
THRU TURRET & THRU TOOLING COOLANT DISCHARGE & FULLY ENCLUSED
CHIP/SPLASH GUARDING & INTERLOCKED SKIDING ACCESS DOOR.
TRABON AUTOMATIC MACHINE LUBRICATION SYSTEM

Return to Menu (Use your BACK function to return to previous screen.)