SPECIFICATIONS:
Length of Table: 48"
Width of Table: 48"
Height of Table: 11"
Area of Base: 59" x 59"
Weight, Capacity: 25,000 Lbs., 13" Allowed Off Center Load
Number of T-Slots: 6
Width of T-Slots: 13/16"
Width of T-Slots at Bottom: 1-1/2"
Depth of T-Slot: 1-1/2"
Table Indexed: 360 Degrees - 8-Positions by Shot Pin
Located w/5 Seconds of Arc Accuracy
Locating Keyway, Reference Offset
Noteplate & Center Bore In Table, Table
Platten Inscribed in 1/2 Deg. Increments
NOTE: The GIDDINGS & LEWIS Hydrostatic Rotary Table is raised &
rotated manually on hydrostatic bearings. When the air
powered clamps are released, the hydrostatic pump starts
& lifts the table (Requires 60 PSI Min. & 80 PSI Max.).
The table can then be rotated manually. The system will
stop when the table is clamped. The air used must be dry
& filtered.
EQUIPPED WITH: Hydrostatic Bearings
Manual Rotation
Power Clamp
Condition: GOOD
Loaded on Truck.............Toledo, (Campbell St. Whse.) OH
**PHOTO, CATALOGUE INFO & MANUALS AVAILABLE
Return to Menu
(Use your BACK function to return to previous screen.)
