0B5500 BORING MILLS, HORIZONTAL, TABLE TYPE
4", VANGUARD, 63"-X, 47"Y, 55"-Z, 50 Tpr, 49" x 43" Rot. Tbl, Facing Head, New Our reference: 20040

MODEL TPX 6111C-3

The Vanguard TPX 6111C-3 is a heavy duty Table type Horizontal Boring Mill

featuring Meehanite stress relieved castings. The extra wide box ways are

induction hardened and ground; the mated surfaces are coated with an anti-

friction wear lining. The rugged 2-speed Geared Headstock employs hardened and

ground gears, and is controlled by a Mitsubishi spindle drive providing

infinitely variable speeds through out the 2 ranges. The Table features a

built-in 360 degree rotary table for added versatility. The TPX 6111C-3 has

more standard features than competitive models on the market, outstanding

features like:

*Built in Pendant Control *Precision hardened & ground ways
*Fully automatic lubrication system *Full stainless telescoping way covers
*Rapid traverse in all feeed directions *Precision hardened & ground gears
*Newall digital readout mounted in *Built-In Facing head
pendant control *Hydraulic clamping of headstock,

*Integral outrigger support table, and saddle

MACHINE SPECIFICATIONS

Boring spindle diameter................4.3"
Spindle taper..........................No. 50
Max spindle torque.....................906 ft-lb's.
Max facing head torque.................1450 ft. lbs.
Max spindle thrust.....................9065 ft. lbs.

Max travel of boring spindle W.........23.6"
Number of spindle speeds...............Infinite
Range of spindle speeds................8 - 1,100 RPM
Travel of facing slide.................7"
Table size.............................49" X 43"
Table load capacity....................6600 lbs.
X-axis travel..........................62.99"
Y-axis travel..........................47.24"
Z-axis travel..........................55.11"
Spindle motor..........................20 HP
Machine weight.........................39672 lbs.
Dimensions L W H.......................202" x 133" x 122"


STANDARD EQUIPMENT

Built in Facing Head
Automation lubrication system
Rapid traverse in all feed directions
Newall Digital Readout Pendant mounted
Stainless Steel way Covers
Outboard Support
Universal Boring Head
Long Tool Holder for Facing Head
Short Tool Holder for Facing Head
Change Gears
Milling Tool Holder
Boring Tools
Miscellaneous Tooling
Tapping Tool Holder
Foundation Bolts & Leveling Pads
CE Electronics
Manuals

Vanguard Machinery International, LLC
LIMITED WARRANTY

Vanguard Machinery International, LLC (VMI,LLC) warrants to the original

purchaser other than a purchaser for resale. (the Purchaser) that VMI,LLC's

machine tools shall be free of defects in materials and workmanship for a

period of one (1) year from the completion of installation, or for a period of

fifteen (15)
months from date of shipment, whichever is earlier. VMI,LLC will, at its sole

and exclusive discretion, either replace or repair any machine or part thereof

defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by or authorized by a VMI,LLC

Authorized Service Organization to obtain warranty service. Purchaser must

contact their local VMI,LLC Authorized Service Organization. Purchaser must

provide verification of the date of delivery/installation when requesting

warranty service (dated installation report). Ground freight charges (UPS

regular or common carrier truck) for all warranty replacement parts are paid

by VMI,LLC. If machine is not operational,

VMI, LLC will pay next-day air shipment charges for necessary parts weighing

100 lbs. or less. Materials or parts alleged to be defective shall be returned

to VMI, LLC at VMI,LLC's request, transportation charges prepaid. After the

warranty repair or replacement of a defective part, VMI,LLC's warranty for

such part shall continue for ninety (90) days or for the remainder of the

original Limited Warranty whichever is longer.

WARRANTY LIMITATIONS
This warranty shall remain in effect only if the machine is used and

maintained in accordance with all operating and maintenance instructions set

forth in the manuals and instruction sheets furnished by VMI,LLC. VMI,LLC

shall have no liability to repair or replace defective parts until the

Purchaser has fulfilled its payment obligations. No allowance will be made for

repairs or alterations made without VMI,LLC's written consent or approval. The

limited warranty provided by VMI,LLC excludes the following.

1.Damage, malfunction, or failure caused by or resulting from improper

maintenance, misuse, neglect, accident or any other cause beyond the control

of VMI,LLC.
2.Damage. malfunction, or failure caused by modification of the machine

(mechanical or electrical) without written authorization by VMI,LLC.
3.Damage. malfunction, or failure caused by installation or use of

accessories or peripherals not purchased through or authorized in writing by

VMI,LLC.
4.Paint, batteries, filters, fluids, fuses, light bulbs, or any common

expendable item.
5.Damage to machines and/or components while being transported from VMI,LLC

warehouse or facility to destination.
6.Accessories or peripheral not manufactured by VMI,LLC which shall be

subject only to whatever warranty that is supplied by the manufacturer of

such product.
7.CNC control, spindle and servo motors, spindle and servo drives. Which are

covered by a two (2) year manufacturer warranty.


No person, agent, distributor, dealer or company is authorized to change,

modify, or amend the terms of this Limited Warranty in any manner. VMI,LLC

makes no warranties, guarantees or representations, express or implied with

respect to the machine tool, or parts thereof, except to the extent such

warranty is set forth here. The equipment covered does not necessarily comply

with any codes or standards unless specifically quoted, ordered, and so

accepted.

F.O.B. Houston, TX

Return to Menu (Use your BACK function to return to previous screen.)