CHUCK DIAMETER................................ 39.4"
MAXIMUM SWING................................. 47.2"
SWING OVER THE Z AXIS WAY COVERS.............. 47.2"
SWING OVER THE X AXIS WAY COVERS.............. 30.7"
STANDARD MAX TRUNING DIAMETER................. 39.4"
MAXIMUM TURNING DIAMETER...................... 42.0"
MAXIMUM TURNING HEIGHT........................ 27.5"
MAXIMUM PART WEIGHT........................... 3970 LBS
FLOOR TO SPINDLE FACE......................... 43.7"
FRONT DOOR TO SPINDLE CENTER.................. 23.6"
SPINDLE NOSE.................................. A2-11
SPINDLE BEARING DIAM / SPINDLE BORE DIAM...... 8.7" DIA / 3.9" DIA
SPINDLE SPEED................................. 20 - 1200 RPM
(600 RPM MAX W/ 40" CHK)
SPINDLE SPEED RANGES (GEARBOX)................ 2
MAXIMUM SPINDLE TORQUE........................ 3,100 FT-LB
X AXIS TRAVEL................................. -1.96", +29.52"
Z AXIS TRAVEL................................. 31.50"
X AXIS RAPID TRAVERSE......................... 787.4"/MIN
Z AXIS RAPID TRAVERSE......................... 787.4"/MIN
X AXIS BALL SCREW............................. 40MM / 10MM PITCH
Y AXIS BALL SCREW............................. 50MM / 10MM PITCH
X AXIS BOX WAY SPAN........................... 16.1"
Y AXIS BOX WAY SPAN........................... 23.3"
CUTTING FEED-RATE............................. .0004 - 1.97 IPM
X AXIS SERVO MOTOR............................ 5.4 HP
Z AXIS SERVO MOTOR............................ 9.4 HP
SPINDLE MOTOR................................. 50 HP
NUMBER OF TOOL STATIONS....................... 10
TURNING TOOL SIZE............................. 1.25"
BORING BAR DIAMETER........................... 2.0"
TURRET INDEX TIME............................. 1.5 SEC (INCL CLAMP/UNCLAMP)
TURRET INDEXING COUPLING...................... CURVIC COUPLING
TURRET INDEX ACCURACY......................... +/- 3 ARC SECONDS
X, Z AXIS ACCURACY / REPEATABILITY............ .0002" / .0002"
COOLANT TANK VOLUME........................... 206 GALLONS
COOLANT TANK STD/OPT.......................... 80 PSI / 284 PSI
MACHINE LENGTH x WIDTH........................ 175" x 114"
MACHINE HEIGHT................................ 158"
MACHINE WEIGHT................................ 35,100 LBS
POWER REQUIREMENTS............................ 208 VOLTS
STANDARD FEATURES / ACCESSORIES:
45/50 HP, 1200 RPM SPINDLE (NOTE 40" STD CHUCK LIMITED TO 600 RPM)
2 SPEED ZF GEARBOX SPINDLE DRIVE (STD)
HARDENED & GROUND BOX WAYS SYSTEMS
SINGLE FANUC 0iTC CONTROL W/ 10.4 TFT SCREEN AND MGI
40" 3-JAW POWER CHUCK WITH HI-LOW PRESSURE SETTINGS
10 STATION WEDGE-CLAMP TURRET
(6) TOOL HOLDERS (3 TURNING, 3 BORING PER TURRET)
FLOOD COOLANT SYSTEM (80 PSI)
COOLANT CHIP FLUSH
HYDRAULIC UNIT
CHILLER FOR ELECTRICAL CABINET
AUTO LUBRICATION SYSTEM
WORK LAMP
AUTOMATIC DOOR (OPTION)
BELT CHIP CONVEYOR & CHIP CART - REAR DISCHARGE
1 PC MEEHANITE CAST IRON BED & COLUMN
BOX WAY CONSTRUCTION (X & Z AXES)
787 IPM RAPID TRAVERSE RATES
10.4" COLOR LCD DISPLAY (STD)
FANUC MANUAL GUIDE i 3-D GRAPHIC, SHOP FLOOR PROGRAMMING (STD)
MACHINE INVESTMENT............................ $ 317,500.00
OPTIONS: HIGH PRESSURE COOLANT SYSTEM
(284 PSI, IN PLACE OF 80 PSI)................. $ 3,160.00
PAYMENT TERMS:
30% DOWN PAYMENT WITH PURCHASE ORDER
60% PRIOR TO SHIPMENT FROM FACTORY
10% NET BALANCE DUE UPON COMPLETION ON MACHINE INSTALATION
EXCEPTIONS * ARE THE SALES PRICE OF ASSCOIATED OPTIONS / ACCESSORIES NOT
OPERATIONAL OR NOT ON SITE AT TIME OF MACHINE INSTALATION
DELIVERY: IMMEDIATELY AVAILABLE
STOCK IN TAIWAN, SUBJECT TO PRIOR SALE
VALIDITY: THIS PROPOSAL IS VALID FOR THIS MACHINE ONLY
Return to Menu
(Use your BACK function to return to previous screen.)
